Message ID | 20210816114840.17502-2-o.rempel@pengutronix.de (mailing list archive) |
---|---|
State | Awaiting Upstream |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | [v1,1/3] dt-bindings: can-controller: add support for termination-gpios | expand |
Context | Check | Description |
---|---|---|
netdev/cover_letter | warning | Series does not have a cover letter |
netdev/fixes_present | success | Link |
netdev/patch_count | success | Link |
netdev/tree_selection | success | Guessed tree name to be net-next |
netdev/subject_prefix | success | Link |
netdev/cc_maintainers | success | CCed 8 of 8 maintainers |
netdev/source_inline | success | Was 0 now: 0 |
netdev/verify_signedoff | success | Link |
netdev/module_param | success | Was 0 now: 0 |
netdev/build_32bit | success | Errors and warnings before: 0 this patch: 0 |
netdev/kdoc | success | Errors and warnings before: 0 this patch: 0 |
netdev/verify_fixes | success | Link |
netdev/checkpatch | success | total: 0 errors, 0 warnings, 0 checks, 27 lines checked |
netdev/build_allmodconfig_warn | success | Errors and warnings before: 0 this patch: 0 |
netdev/header_inline | success | Link |
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 55bff1586b6f..ef31696eb642 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -119,6 +119,9 @@ properties: minimum: 0 maximum: 2 + termination-gpios: true + termination-ohms: true + required: - compatible - reg @@ -148,3 +151,18 @@ examples: fsl,stop-mode = <&gpr 0x34 28>; fsl,scu-index = /bits/ 8 <1>; }; + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + + can@2090000 { + compatible = "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 1>, <&clks 2>; + clock-names = "ipg", "per"; + fsl,stop-mode = <&gpr 0x34 28>; + fsl,scu-index = /bits/ 8 <1>; + termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + termination-ohms = /bits/ 16 <150>; + };
Enable termination-* binding and provide validation example for it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- .../bindings/net/can/fsl,flexcan.yaml | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)