[iproute2-next,2/2] bridge: vlan: add support for mcast_router option

Commit Message

Nikolay Aleksandrov Sept. 1, 2021, 10:38 a.m. UTC

From: Nikolay Aleksandrov <[e-mail]>

Add support for setting and dumping per-vlan/interface mcast_router
option. It controls the mcast router mode of a vlan/interface pair.
For bridge devices only modes 0 - 2 are allowed. The possible modes
are:
 0 - disabled
 1 - automatic router presence detection (default)
 2 - permanent router
 3 - temporary router (available only for ports)

Example:
 # mark port ens16 as a permanent mcast router for vlan 100
 $ bridge vlan set dev ens16 vid 100 mcast_router 2
 # disable mcast router for port ens16 and vlan 200
 $ bridge vlan set dev ens16 vid 200 mcast_router 0
 $ bridge -d vlan show
 port              vlan-id
 ens16             1 PVID Egress Untagged
                     state forwarding mcast_router 1
                   100
                     state forwarding mcast_router 2
                   200
                     state forwarding mcast_router 0

Signed-off-by: Nikolay Aleksandrov <[e-mail]>
---
 bridge/vlan.c     | 17 ++++++++++++++++-
 man/man8/bridge.8 | 29 ++++++++++++++++++++++++++++-
 2 files changed, 44 insertions(+), 2 deletions(-)

Patch

diff --git a/bridge/vlan.c b/bridge/vlan.c
index 48365bca4c4a..8300f353f1a7 100644
--- a/bridge/vlan.c
+++ b/bridge/vlan.c
@@ -36,6 +36,7 @@  static void usage(void)
 		"                                                     [ pvid ] [ untagged ]\n"
 		"                                                     [ self ] [ master ]\n"
 		"       bridge vlan { set } vid VLAN_ID dev DEV [ state STP_STATE ]\n"
+		"                                               [ mcast_router MULTICAST_ROUTER ]\n"
 		"       bridge vlan { show } [ dev DEV ] [ vid VLAN_ID ]\n"
 		"       bridge vlan { tunnelshow } [ dev DEV ] [ vid VLAN_ID ]\n"
 		"       bridge vlan global { set } vid VLAN_ID dev DEV\n"
@@ -334,6 +335,15 @@  static int vlan_option_set(int argc, char **argv)
 			}
 			addattr8(&req.n, sizeof(req), BRIDGE_VLANDB_ENTRY_STATE,
 				 state);
+		} else if (strcmp(*argv, "mcast_router") == 0) {
+			__u8 mcast_router;
+
+			NEXT_ARG();
+			if (get_u8(&mcast_router, *argv, 0))
+				invarg("invalid mcast_router", *argv);
+			addattr8(&req.n, sizeof(req),
+				 BRIDGE_VLANDB_ENTRY_MCAST_ROUTER,
+				 mcast_router);
 		} else {
 			if (matches(*argv, "help") == 0)
 				NEXT_ARG();
@@ -942,7 +952,7 @@  static void print_vlan_global_opts(struct rtattr *a, int ifindex)
 
 static void print_vlan_opts(struct rtattr *a, int ifindex)
 {
-	struct rtattr *vtb[BRIDGE_VLANDB_ENTRY_MAX + 1];
+	struct rtattr *vtb[BRIDGE_VLANDB_ENTRY_MAX + 1], *vattr;
 	struct bridge_vlan_xstats vstats;
 	struct bridge_vlan_info *vinfo;
 	__u16 vrange = 0;
@@ -1006,6 +1016,11 @@  static void print_vlan_opts(struct rtattr *a, int ifindex)
 	print_nl();
 	print_string(PRINT_FP, NULL, "%-" __stringify(IFNAMSIZ) "s    ", "");
 	print_stp_state(state);
+	if (vtb[BRIDGE_VLANDB_ENTRY_MCAST_ROUTER]) {
+		vattr = vtb[BRIDGE_VLANDB_ENTRY_MCAST_ROUTER];
+		print_uint(PRINT_ANY, "mcast_router", "mcast_router %u ",
+			   rta_getattr_u8(vattr));
+	}
 	print_nl();
 	if (show_stats)
 		__print_one_vlan_stats(&vstats);
diff --git a/man/man8/bridge.8 b/man/man8/bridge.8
index 76d2fa09d5bc..c3c4ae48aaed 100644
--- a/man/man8/bridge.8
+++ b/man/man8/bridge.8
@@ -145,7 +145,9 @@  bridge \- show / manipulate bridge addresses and devices
 .B vid
 .IR VID " [ "
 .B state
-.IR STP_STATE " ] "
+.IR STP_STATE " ] [ "
+.B mcast_router
+.IR MULTICAST_ROUTER " ]"
 
 .ti -8
 .BR "bridge vlan" " [ " show " | " tunnelshow " ] [ "
@@ -915,6 +917,31 @@  is used during the STP election process. In this state, the vlan will only proce
 STP BPDUs.
 .sp
 
+.TP
+.BI mcast_router " MULTICAST_ROUTER "
+configure this vlan and interface's multicast router mode, note that only modes
+0 - 2 are available for bridge devices.
+A vlan and interface with a multicast router will receive all multicast traffic.
+.I MULTICAST_ROUTER
+may be either
+.sp
+.B 0
+- to disable multicast router.
+.sp
+
+.B 1
+- to let the system detect the presence of routers (default).
+.sp
+
+.B 2
+- to permanently enable multicast traffic forwarding on this vlan and interface.
+.sp
+
+.B 3
+- to temporarily mark this vlan and port as having a multicast router, i.e.
+enable multicast traffic forwarding. This mode is available only for ports.
+.sp
+
 .SS bridge vlan show - list vlan configuration.
 
 This command displays the current VLAN filter table.