diff mbox series

Revert "brcmfmac: use ISO3166 country code and 0 rev as fallback"

Message ID 20210926201905.211605-1-smoch@web.de (mailing list archive)
State Awaiting Upstream
Delegated to: Netdev Maintainers
Headers show
Series Revert "brcmfmac: use ISO3166 country code and 0 rev as fallback" | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Soeren Moch Sept. 26, 2021, 8:19 p.m. UTC
This reverts commit b0b524f079a23e440dd22b04e369368dde847533.

Commit b0b524f079a2 ("brcmfmac: use ISO3166 country code and 0 rev
as fallback") changes country setup to directly use ISO3166 country
codes if no more specific code is configured. This was done under
the assumption that brcmfmac firmwares can handle such simple
direct mapping from country codes to firmware ccode values.

Unfortunately this is not true for all chipset/firmware combinations.
E.g. BCM4359/9 devices stop working as access point with this change,
so revert the offending commit to avoid the regression.

Signed-off-by: Soeren Moch <smoch@web.de>
Cc: stable@vger.kernel.org  # 5.14.x
--
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Cc: Wright Feng <wright.feng@infineon.com>
Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 .../broadcom/brcm80211/brcmfmac/cfg80211.c      | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

--
2.25.1

Comments

Shawn Guo Sept. 27, 2021, 12:08 a.m. UTC | #1
On Sun, Sep 26, 2021 at 10:19:05PM +0200, Soeren Moch wrote:
> This reverts commit b0b524f079a23e440dd22b04e369368dde847533.
> 
> Commit b0b524f079a2 ("brcmfmac: use ISO3166 country code and 0 rev
> as fallback") changes country setup to directly use ISO3166 country
> codes if no more specific code is configured. This was done under
> the assumption that brcmfmac firmwares can handle such simple
> direct mapping from country codes to firmware ccode values.
> 
> Unfortunately this is not true for all chipset/firmware combinations.
> E.g. BCM4359/9 devices stop working as access point with this change,
> so revert the offending commit to avoid the regression.
> 
> Signed-off-by: Soeren Moch <smoch@web.de>
> Cc: stable@vger.kernel.org  # 5.14.x

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Kalle Valo Sept. 28, 2021, 7:08 a.m. UTC | #2
Soeren Moch <smoch@web.de> wrote:

> This reverts commit b0b524f079a23e440dd22b04e369368dde847533.
> 
> Commit b0b524f079a2 ("brcmfmac: use ISO3166 country code and 0 rev
> as fallback") changes country setup to directly use ISO3166 country
> codes if no more specific code is configured. This was done under
> the assumption that brcmfmac firmwares can handle such simple
> direct mapping from country codes to firmware ccode values.
> 
> Unfortunately this is not true for all chipset/firmware combinations.
> E.g. BCM4359/9 devices stop working as access point with this change,
> so revert the offending commit to avoid the regression.
> 
> Signed-off-by: Soeren Moch <smoch@web.de>
> Cc: stable@vger.kernel.org  # 5.14.x
> Acked-by: Shawn Guo <shawn.guo@linaro.org>

Patch applied to wireless-drivers.git, thanks.

151a7c12c4fc Revert "brcmfmac: use ISO3166 country code and 0 rev as fallback"
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index f7b96cd69242..9db12ffd2ff8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -7463,23 +7463,18 @@  static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
 	s32 found_index;
 	int i;

+	country_codes = drvr->settings->country_codes;
+	if (!country_codes) {
+		brcmf_dbg(TRACE, "No country codes configured for device\n");
+		return -EINVAL;
+	}
+
 	if ((alpha2[0] == ccreq->country_abbrev[0]) &&
 	    (alpha2[1] == ccreq->country_abbrev[1])) {
 		brcmf_dbg(TRACE, "Country code already set\n");
 		return -EAGAIN;
 	}

-	country_codes = drvr->settings->country_codes;
-	if (!country_codes) {
-		brcmf_dbg(TRACE, "No country codes configured for device, using ISO3166 code and 0 rev\n");
-		memset(ccreq, 0, sizeof(*ccreq));
-		ccreq->country_abbrev[0] = alpha2[0];
-		ccreq->country_abbrev[1] = alpha2[1];
-		ccreq->ccode[0] = alpha2[0];
-		ccreq->ccode[1] = alpha2[1];
-		return 0;
-	}
-
 	found_index = -1;
 	for (i = 0; i < country_codes->table_size; i++) {
 		cc = &country_codes->table[i];