diff mbox series

[net-next,08/13] dt-bindings: net: dsa: qca8k: Add MAC swap and clock phase properties

Message ID 20211006223603.18858-9-ansuelsmth@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Multiple improvement for qca8337 switch | expand

Checks

Context Check Description
netdev/cover_letter success Series has a cover letter
netdev/fixes_present success Fixes tag not required for -next series
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 9 of 9 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success No Fixes tag
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 9 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success No static functions without inline keyword in header files

Commit Message

Christian Marangi Oct. 6, 2021, 10:35 p.m. UTC 
Add names and decriptions of additional PORT0_PAD_CTRL properties.
Document new binding qca,mac6_exchange that exchange the mac0 port
with mac6.
qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock
phase to failling edge.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 Documentation/devicetree/bindings/net/dsa/qca8k.txt | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
index 1f6b7d2f609e..780d1e60c425 100644
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
@@ -13,6 +13,9 @@  Required properties:
 Optional properties:
 
 - reset-gpios: GPIO to be used to reset the whole device
+- qca,mac6-exchange: Internally swap MAC0 and MAC6.
+- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge.
+- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
 - qca,rgmii0-1-8v: Set the internal regulator to supply 1.8v for MAC0 port
 - qca,rgmii56-1-8v: Set the internal regulator to supply 1.8v for MAC5/6 port