diff mbox series

[net-next,v2,03/15] drivers: net: phy: at803x: enable prefer master for 83xx internal phy

Message ID 20211008002225.2426-4-ansuelsmth@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series Multiple improvement for qca8337 switch | expand

Checks

Context Check Description
netdev/cover_letter success Series has a cover letter
netdev/fixes_present success Fixes tag not required for -next series
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success No Fixes tag
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 9 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success No static functions without inline keyword in header files

Commit Message

Christian Marangi Oct. 8, 2021, 12:22 a.m. UTC 
From original QCA source code the port was set to prefer master as port
type in 1000BASE-T mode. Apply the same settings also here.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/at803x.c | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 5208ea8fdd69..402b2096f209 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1325,6 +1325,9 @@  static int qca83xx_config_init(struct phy_device *phydev)
 		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
 				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
 
+	/* Following original QCA sourcecode set port to prefer master */
+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
+
 	return 0;
 }