@@ -935,6 +935,7 @@ static int
qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
{
struct device_node *node = priv->dev->of_node;
+ const struct qca8k_match_data *data;
u32 val = 0;
int ret;
@@ -943,8 +944,14 @@ qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
* Should be applied by default but we set this just to make sure.
*/
if (priv->switch_id == QCA8K_ID_QCA8327) {
+ data = of_device_get_match_data(priv->dev);
+
+ /* Set the correct package of 148 pin for QCA8327 */
+ if (data->reduced_package)
+ val |= QCA8327_PWS_PACKAGE148_EN;
+
ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
- QCA8327_PWS_PACKAGE148_EN);
+ val);
if (ret)
return ret;
}
@@ -2018,7 +2025,12 @@ static int qca8k_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
qca8k_suspend, qca8k_resume);
-static const struct qca8k_match_data qca832x = {
+static const struct qca8k_match_data qca8327 = {
+ .id = QCA8K_ID_QCA8327,
+ .reduced_package = true,
+};
+
+static const struct qca8k_match_data qca8328 = {
.id = QCA8K_ID_QCA8327,
};
@@ -2027,7 +2039,8 @@ static const struct qca8k_match_data qca833x = {
};
static const struct of_device_id qca8k_of_match[] = {
- { .compatible = "qca,qca8327", .data = &qca832x },
+ { .compatible = "qca,qca8327", .data = &qca8327 },
+ { .compatible = "qca,qca8328", .data = &qca8328 },
{ .compatible = "qca,qca8334", .data = &qca833x },
{ .compatible = "qca,qca8337", .data = &qca833x },
{ /* sentinel */ },
@@ -260,6 +260,7 @@ struct ar8xxx_port_status {
struct qca8k_match_data {
u8 id;
+ bool reduced_package;
};
struct qca8k_priv {
QCA8328 switch is the bigger brother of the qca8327. Same regs different chip. Change the function to set the correct pin layout and introduce a new match_data to differentiate the 2 switch as they have the same ID and their internal PHY have the same ID. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- drivers/net/dsa/qca8k.c | 19 ++++++++++++++++--- drivers/net/dsa/qca8k.h | 1 + 2 files changed, 17 insertions(+), 3 deletions(-)