new file mode 100644
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/marvell,nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell International Ltd. NCI NFC controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+
+properties:
+ compatible:
+ enum:
+ - marvell,nfc-i2c
+ - marvell,nfc-spi
+ - marvell,nfc-uart
+
+ hci-muxed:
+ type: boolean
+ description: |
+ Specifies that the chip is muxing NCI over HCI frames
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ reset-n-io:
+ $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ maxItems: 1
+ description: |
+ Output GPIO pin used to reset the chip (active low)
+
+ i2c-int-falling:
+ type: boolean
+ description: |
+ For I2C type of connection. Specifies that the chip read event shall be
+ trigged on falling edge.
+
+ i2c-int-rising:
+ type: boolean
+ description: |
+ For I2C type of connection. Specifies that the chip read event shall be
+ trigged on rising edge.
+
+ break-control:
+ type: boolean
+ description: |
+ For UART type of connection. Specifies that the chip needs specific break
+ management.
+
+ flow-control:
+ type: boolean
+ description: |
+ For UART type of connection. Specifies that the chip is using RTS/CTS.
+
+ spi-cpha: true
+ spi-cpol: true
+ spi-max-frequency: true
+
+required:
+ - compatible
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: marvell,nfc-i2c
+ then:
+ properties:
+ break-control: false
+ flow-control: false
+ spi-cpha: false
+ spi-cpol: false
+ spi-max-frequency: false
+ required:
+ - reg
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: marvell,nfc-spi
+ then:
+ properties:
+ break-control: false
+ flow-control: false
+ i2c-int-falling: false
+ i2c-int-rising: false
+ required:
+ - reg
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: marvell,nfc-uart
+ then:
+ properties:
+ i2c-int-falling: false
+ i2c-int-rising: false
+ interrupts: false
+ spi-cpha: false
+ spi-cpol: false
+ spi-max-frequency: false
+ reg: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@8 {
+ compatible = "marvell,nfc-i2c";
+ reg = <0x8>;
+
+ interrupt-parent = <&gpio3>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+ i2c-int-rising;
+
+ reset-n-io = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nfc@0 {
+ compatible = "marvell,nfc-spi";
+ reg = <0>;
+
+ spi-max-frequency = <3000000>;
+ spi-cpha;
+ spi-cpol;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+
+ reset-n-io = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ uart {
+ nfc {
+ compatible = "marvell,nfc-uart";
+
+ reset-n-io = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+
+ hci-muxed;
+ flow-control;
+ };
+ };
deleted file mode 100644
@@ -1,84 +0,0 @@
-* Marvell International Ltd. NCI NFC Controller
-
-Required properties:
-- compatible: Should be:
- - "marvell,nfc-uart" or "mrvl,nfc-uart" for UART devices
- - "marvell,nfc-i2c" for I2C devices
- - "marvell,nfc-spi" for SPI devices
-
-Optional SoC specific properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- reset-n-io: Output GPIO pin used to reset the chip (active low).
-- hci-muxed: Specifies that the chip is muxing NCI over HCI frames.
-
-Optional UART-based chip specific properties:
-- flow-control: Specifies that the chip is using RTS/CTS.
-- break-control: Specifies that the chip needs specific break management.
-
-Optional I2C-based chip specific properties:
-- i2c-int-falling: Specifies that the chip read event shall be trigged on
- falling edge.
-- i2c-int-rising: Specifies that the chip read event shall be trigged on
- rising edge.
-
-Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
-
-&uart5 {
-
- nfcmrvluart: nfcmrvluart@5 {
- compatible = "marvell,nfc-uart";
-
- reset-n-io = <&gpio3 16 0>;
-
- hci-muxed;
- flow-control;
- }
-};
-
-
-Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1):
-
-&i2c1 {
- clock-frequency = <400000>;
-
- nfcmrvli2c0: i2c@1 {
- compatible = "marvell,nfc-i2c";
-
- reg = <0x8>;
-
- /* I2C INT configuration */
- interrupt-parent = <&gpio3>;
- interrupts = <21 0>;
-
- /* I2C INT trigger configuration */
- i2c-int-rising;
-
- /* Reset IO */
- reset-n-io = <&gpio3 19 0>;
- };
-};
-
-
-Example (for ARM-based BeagleBoard Black on SPI0):
-
-&spi0 {
-
- mrvlnfcspi0: spi@0 {
- compatible = "marvell,nfc-spi";
-
- reg = <0>;
-
- /* SPI Bus configuration */
- spi-max-frequency = <3000000>;
- spi-cpha;
- spi-cpol;
-
- /* SPI INT configuration */
- interrupt-parent = <&gpio1>;
- interrupts = <17 0>;
-
- /* Reset IO */
- reset-n-io = <&gpio3 19 0>;
- };
-};
Convert the Marvell NCI NFC controller to DT schema format. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- .../bindings/net/nfc/marvell,nci.yaml | 170 ++++++++++++++++++ .../devicetree/bindings/net/nfc/nfcmrvl.txt | 84 --------- 2 files changed, 170 insertions(+), 84 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml delete mode 100644 Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt