diff mbox series

[1/2] net: amd-xgbe: Toggle PLL settings during rate change

Message ID 20211012173709.3453585-1-Shyam-sundar.S-k@amd.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series [1/2] net: amd-xgbe: Toggle PLL settings during rate change | expand

Checks

Context Check Description
netdev/cover_letter success Single patches do not need cover letters
netdev/fixes_present success Fixes tag not required for -next series
netdev/patch_count success Link
netdev/tree_selection success Guessed tree name to be net-next
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cc_maintainers success CCed 4 of 4 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success No Fixes tag
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 64 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success No static functions without inline keyword in header files

Commit Message

Shyam Sundar S K Oct. 12, 2021, 5:37 p.m. UTC 
For each rate change command submission, the FW has to do phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.

Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-common.h |  8 ++++++++
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 20 +++++++++++++++++++-
 2 files changed, 27 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
index b2cd3bdba9f8..3ac396cf94e0 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h
@@ -1331,6 +1331,10 @@ 
 #define MDIO_VEND2_PMA_CDR_CONTROL	0x8056
 #endif
 
+#ifndef MDIO_VEND2_PMA_MISC_CTRL0
+#define MDIO_VEND2_PMA_MISC_CTRL0	0x8090
+#endif
+
 #ifndef MDIO_CTRL1_SPEED1G
 #define MDIO_CTRL1_SPEED1G		(MDIO_CTRL1_SPEED10G & ~BMCR_SPEED100)
 #endif
@@ -1389,6 +1393,10 @@ 
 #define XGBE_PMA_RX_RST_0_RESET_ON	0x10
 #define XGBE_PMA_RX_RST_0_RESET_OFF	0x00
 
+#define XGBE_PMA_PLL_CTRL_MASK		BIT(15)
+#define XGBE_PMA_PLL_CTRL_SET		BIT(15)
+#define XGBE_PMA_PLL_CTRL_CLEAR		0x0000
+
 /* Bit setting and getting macros
  *  The get macro will extract the current bit field value from within
  *  the variable
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 18e48b3bc402..4465af9b72cf 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1977,12 +1977,26 @@  static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata)
 	}
 }
 
+static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable)
+{
+	XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0,
+			 XGBE_PMA_PLL_CTRL_MASK,
+			 enable ? XGBE_PMA_PLL_CTRL_SET
+			 : XGBE_PMA_PLL_CTRL_CLEAR);
+
+	/* Wait for command to complete */
+	usleep_range(100, 200);
+}
+
 static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
 					unsigned int cmd, unsigned int sub_cmd)
 {
 	unsigned int s0 = 0;
 	unsigned int wait;
 
+	/* Clear the PLL so that it helps in power down sequence */
+	xgbe_phy_pll_ctrl(pdata, false);
+
 	/* Log if a previous command did not complete */
 	if (XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS)) {
 		netif_dbg(pdata, link, pdata->netdev,
@@ -2003,7 +2017,7 @@  static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
 	wait = XGBE_RATECHANGE_COUNT;
 	while (wait--) {
 		if (!XP_IOREAD_BITS(pdata, XP_DRIVER_INT_RO, STATUS))
-			return;
+			goto reenable_pll;
 
 		usleep_range(1000, 2000);
 	}
@@ -2013,6 +2027,10 @@  static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
 
 	/* Reset on error */
 	xgbe_phy_rx_reset(pdata);
+
+reenable_pll:
+	/* Re-enable the PLL control */
+	xgbe_phy_pll_ctrl(pdata, true);
 }
 
 static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)