diff mbox series

[v3,net-next,4/7] dt-bindings: net: dsa: realtek-smi: document new compatible rtl8365mb

Message ID 20211015171030.2713493-5-alvin@pqrs.dk (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series net: dsa: add support for RTL8365MB-VC | expand

Checks

Context Check Description
netdev/cover_letter success Series has a cover letter
netdev/fixes_present success Fixes tag not required for -next series
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/cc_maintainers success CCed 10 of 10 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success No Fixes tag
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 102 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success No static functions without inline keyword in header files

Commit Message

Alvin Šipraga Oct. 15, 2021, 5:10 p.m. UTC 
From: Alvin Šipraga <alsi@bang-olufsen.dk>

rtl8365mb is a new realtek-smi subdriver for the RTL8365MB-VC 4+1 port
10/100/1000M Ethernet switch controller. Its compatible string is
"realtek,rtl8365mb".

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
---

v2 -> v3: no change

v1 -> v2:
  - add an example to highlight RGMII delay configuration and CPU port
    reg number

RFC -> v1: no change; collect Reviewed-by and Acked-by

 .../bindings/net/dsa/realtek-smi.txt          | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
index b6ae8541bd55..7959ec237983 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
+++ b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
@@ -9,6 +9,7 @@  SMI-based Realtek devices.
 Required properties:
 
 - compatible: must be exactly one of:
+      "realtek,rtl8365mb" (4+1 ports)
       "realtek,rtl8366"
       "realtek,rtl8366rb" (4+1 ports)
       "realtek,rtl8366s"  (4+1 ports)
@@ -62,6 +63,8 @@  and subnodes of DSA switches.
 
 Examples:
 
+An example for the RTL8366RB:
+
 switch {
 	compatible = "realtek,rtl8366rb";
 	/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
@@ -151,3 +154,87 @@  switch {
 		};
 	};
 };
+
+An example for the RTL8365MB-VC:
+
+switch {
+	compatible = "realtek,rtl8365mb";
+	mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+	mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+	switch_intc: interrupt-controller {
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		port@0 {
+			reg = <0>;
+			label = "swp0";
+			phy-handle = <&ethphy0>;
+		};
+		port@1 {
+			reg = <1>;
+			label = "swp1";
+			phy-handle = <&ethphy1>;
+		};
+		port@2 {
+			reg = <2>;
+			label = "swp2";
+			phy-handle = <&ethphy2>;
+		};
+		port@3 {
+			reg = <3>;
+			label = "swp3";
+			phy-handle = <&ethphy3>;
+		};
+		port@6 {
+			reg = <6>;
+			label = "cpu";
+			ethernet = <&fec1>;
+			phy-mode = "rgmii";
+			tx-internal-delay-ps = <2000>;
+			rx-internal-delay-ps = <2000>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+
+	mdio {
+		compatible = "realtek,smi-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: phy@0 {
+			reg = <0>;
+			interrupt-parent = <&switch_intc>;
+			interrupts = <0>;
+		};
+		ethphy1: phy@1 {
+			reg = <1>;
+			interrupt-parent = <&switch_intc>;
+			interrupts = <1>;
+		};
+		ethphy2: phy@2 {
+			reg = <2>;
+			interrupt-parent = <&switch_intc>;
+			interrupts = <2>;
+		};
+		ethphy3: phy@3 {
+			reg = <3>;
+			interrupt-parent = <&switch_intc>;
+			interrupts = <3>;
+		};
+	};
+};