From patchwork Fri Nov 19 06:06:32 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Schmitz X-Patchwork-Id: 12628223 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 629A1C433FE for ; Fri, 19 Nov 2021 06:06:52 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 4571361B3D for ; Fri, 19 Nov 2021 06:06:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232972AbhKSGJw (ORCPT ); Fri, 19 Nov 2021 01:09:52 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58382 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232853AbhKSGJv (ORCPT ); Fri, 19 Nov 2021 01:09:51 -0500 Received: from mail-pj1-x102c.google.com (mail-pj1-x102c.google.com [IPv6:2607:f8b0:4864:20::102c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 73810C061574; Thu, 18 Nov 2021 22:06:50 -0800 (PST) Received: by mail-pj1-x102c.google.com with SMTP id gt5so7144899pjb.1; Thu, 18 Nov 2021 22:06:50 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=B8WPDjGUJRE2JeDwvnKl9Yuv3HNoht+a+JZRzhwjgYM=; b=jyfuIOS93hRvJPy2pWBYQGz9lWWdjRV78nk2Ui3E3VnbSd9tzXthXMdhTQjt6Mq6N3 0ICpRaoKaky9F7KlV+fDeyzNixMDu8KCh9Dntd5o6mej28nmUooXJMWuCVlAD/qQwWkn 4Rr5eHetyL1BbdkIVYEqT+Y55jK310mTlKYOV3p6x3h+lnRBHXpSCea2Zms6cRLQhdOE 5CgOSuZEUDfcMACz5YCQjUZcalyO5tP4V3qjVI5jcP6TE4uXHAY3X+NM9l2eiCoXdsgQ uiKBpLNMfCBUyY0ADf1bj4RhBrUKV6clMHc3PiDNZLAbk2h5th2zNku0wD2c25lxzhVT SsaA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=B8WPDjGUJRE2JeDwvnKl9Yuv3HNoht+a+JZRzhwjgYM=; b=7Cj+wi5cB5tgwqPHEFQp4YhgywV/VzXdzh0GLstVy6ngDwPnt+DDAsct6yb5dWVeDg JpWnLGXpsjni8nHEOq6cotuqbO4RDeOIj936S1xFV6761ngrsFuxW2dJBoFC2Eb+0HTl Y47odMIhhhK+XWMarg8tRQhKMIthLQPjOdo4z/VdIOOKOOWEeIcpVhNNWm2JhUj4ELbA oIVnTKRDugvejVUEzLJ/7SabiVZhNejNaMx3LFRUQBYuVBrqvFhBzRsAJwMd7UYoRbax 7kV0d4002CkbVr/LtJdv2xsi7f9JkiECjuQNmvgNAFy9tR31Nx+rcX8XR/K1o08/xcEj kKpA== X-Gm-Message-State: AOAM533PK18bT1LKaFbyHhK1eiNn2HYsK0StmcgroHCKouIffKZsCVf3 iv3T54eiOU8n/p0uBxjhl4g= X-Google-Smtp-Source: ABdhPJw29E8Wi55EDUBTxk+TlZ+S/KNM4nO9zSuHxAPA0BiA/aOUHCKGTk5KXZq/rneDxG1uW4WppQ== X-Received: by 2002:a17:902:82c9:b0:142:401f:dc9 with SMTP id u9-20020a17090282c900b00142401f0dc9mr74235446plz.43.1637302010002; Thu, 18 Nov 2021 22:06:50 -0800 (PST) Received: from xplor.waratah.dyndns.org (222-155-101-117-fibre.sparkbb.co.nz. [222.155.101.117]) by smtp.gmail.com with ESMTPSA id k1sm1560360pfu.31.2021.11.18.22.06.49 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 18 Nov 2021 22:06:49 -0800 (PST) Received: by xplor.waratah.dyndns.org (Postfix, from userid 1000) id 357C9360310; Fri, 19 Nov 2021 19:06:46 +1300 (NZDT) From: Michael Schmitz To: linux-m68k@vger.kernel.org, geert@linux-m68k.org Cc: alex@kazik.de, Michael Schmitz , netdev@vger.kernel.org Subject: [PATCH net v12 3/3] net/8390: apne.c - add 100 Mbit support to apne.c driver Date: Fri, 19 Nov 2021 19:06:32 +1300 Message-Id: <20211119060632.8583-4-schmitzmic@gmail.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20211119060632.8583-1-schmitzmic@gmail.com> References: <20211119060632.8583-1-schmitzmic@gmail.com> Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Add module parameter, IO mode autoprobe and PCMCIA reset code required to support 100 Mbit PCMCIA ethernet cards on Amiga. 10 Mbit and 100 Mbit mode are supported by the same module. Use the core PCMCIA cftable parser to detect 16 bit cards, and automatically enable 16 bit ISA IO access for those cards by changing isa_type at runtime. The user must select PCCARD and PCMCIA in the kernel config to make the necessary support modules available. Code to reset the PCMCIA hardware required for 16 bit cards is also added to the driver probe. An optional module parameter switches Amiga ISA IO accessors to 8 or 16 bit access in case autoprobe fails. Patch modified after patch "[PATCH RFC net-next] Amiga PCMCIA 100 MBit card support" submitted to netdev 2018/09/16 by Alex Kazik . CC: netdev@vger.kernel.org Link: https://lore.kernel.org/r/1622958877-2026-1-git-send-email-schmitzmic@gmail.com Tested-by: Alex Kazik Signed-off-by: Michael Schmitz Reviewed-by: Geert Uytterhoeven --- Changes from v11: Geert Uytterhoeven: - use IS_REACHABLE() for PCMCIA dependent code - use container_of() instead of cast in pcmcia_parse_tuple() call - set isa_type and apne_100_mbit correctly if autoprobe fails - reset isa_type and apne_100_mbit on module exit Joe Perches: - use pr_debug and co. to avoid #ifdef DEBUG Changes from v9: - avoid pcmcia_is_16bit() forward declaration Randy Dunlap: - do not select PCCARD and PCMCIA options when selecting APNE Changes from v8: Geert Uytterhoeven: - cistpl.h definitions now provided through amipcmcia.h - really change module parameter to (signed) int Changes from v7: - move 'select' for PCCARD and PCMCIA to 8390 Kconfig, so Amiga pcmcia.c may remain built-in while core PCMCIA code can be built as modules if APNE driver is a module. - move 16 bit mode autoprobe code from amiga/pcmcia.c to this driver, to allow the core PCMCIA code we depend on to be built as modules. - change module parameter type from bool to int to allow for tri-state semantics (autoprobe, 8 bit, 16 bit). Changes from v6: - use 16 bit mode autoprobe based on PCMCIA config table data Changes from v5: - move autoprobe code to new patch in this series Geert Uytterhoeven: - reword Kconfig help text Finn Thain: - style fixes, use msec_to_jiffies in timeout calc Alex Kazik: - revert module parameter permission change Changes from v4: Geert Uytterhoeven: - remove APNE100MBIT config option, always include 16 bit support - change module parameter permissions - try autoprobing for 16 bit mode early on in device probe Changes from v3: - change module parameter name to match Kconfig help Finn Thain: - fix coding style in new card reset code block - allow reset of isa_type by module parameter Changes from v1: - fix module parameter name in Kconfig help text Alex Kazik: - change module parameter type to bool, fix module parameter permission Changes from RFC: Geert Uytterhoeven: - change APNE_100MBIT to depend on APNE - change '---help---' to 'help' (former no longer supported) - fix whitespace errors - fix module_param_named() arg count - protect all added code by #ifdef CONFIG_APNE_100MBIT set ISA_TYPE_AG if 16 bit autoprobe failed; reset to sane state on module exit --- drivers/net/ethernet/8390/Kconfig | 8 +++ drivers/net/ethernet/8390/apne.c | 82 +++++++++++++++++++++++++++++++ 2 files changed, 90 insertions(+) diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index a4130e643342..24163902d139 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -144,6 +144,14 @@ config APNE To compile this driver as a module, choose M here: the module will be called apne. + The driver also supports 10/100Mbit cards (e.g. Netgear FA411, + CNet Singlepoint). To activate 100 Mbit support, use the kernel + option apne.100mbit=1 (builtin) at boot time, or the apne.100mbit + module parameter. The driver will attempt to autoprobe 100 Mbit + mode if the PCCARD and PCMCIA kernel configuration options are + selected, so this option may not be necessary. Use apne.100mbit=0 + should autoprobe mis-detect a 100 Mbit card. + config PCMCIA_PCNET tristate "NE2000 compatible PCMCIA support" depends on PCMCIA diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c index da1ae37a9d73..ed7e97bd260b 100644 --- a/drivers/net/ethernet/8390/apne.c +++ b/drivers/net/ethernet/8390/apne.c @@ -119,6 +119,45 @@ static u32 apne_msg_enable; module_param_named(msg_enable, apne_msg_enable, uint, 0444); MODULE_PARM_DESC(msg_enable, "Debug message level (see linux/netdevice.h for bitmap)"); +static int apne_100_mbit = -1; +module_param_named(100_mbit, apne_100_mbit, int, 0444); +MODULE_PARM_DESC(100_mbit, "Enable 100 Mbit support"); + +#if IS_REACHABLE(CONFIG_PCMCIA) +static int pcmcia_is_16bit(void) +{ + u_char cftuple[258]; + int cftuple_len; + tuple_t cftable_tuple; + cistpl_cftable_entry_t cftable_entry; + + cftuple_len = pcmcia_copy_tuple(CISTPL_CFTABLE_ENTRY, cftuple, 256); + if (cftuple_len < 3) + return 0; + else + print_hex_dump_debug("cftable: ", DUMP_PREFIX_NONE, 8, + sizeof(char), cftuple, cftuple_len, false); + + /* build tuple_t struct and call pcmcia_parse_tuple */ + cftable_tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + cftable_tuple.TupleCode = CISTPL_CFTABLE_ENTRY; + cftable_tuple.TupleData = &cftuple[2]; + cftable_tuple.TupleDataLen = cftuple_len - 2; + cftable_tuple.TupleDataMax = cftuple_len - 2; + + if (pcmcia_parse_tuple(&cftable_tuple, container_of(&cftable_entry, + cisparse_t, cftable_entry))) + return 0; + + pr_debug("IO flags: %x\n", cftable_entry.io.flags); + + if (cftable_entry.io.flags & CISTPL_IO_16BIT) + return 1; + + return 0; +} +#endif + static struct net_device * __init apne_probe(void) { struct net_device *dev; @@ -140,6 +179,17 @@ static struct net_device * __init apne_probe(void) pr_info("Looking for PCMCIA ethernet card : "); + if (apne_100_mbit == 1) + isa_type = ISA_TYPE_AG16; + else if (apne_100_mbit == 0) + isa_type = ISA_TYPE_AG; + else +#if IS_REACHABLE(CONFIG_PCMCIA) + pr_cont(" (autoprobing 16 bit mode) "); +#else + pr_cont(" (no 16 bit autoprobe support) "); +#endif + /* check if a card is inserted */ if (!(PCMCIA_INSERTED)) { pr_cont("NO PCMCIA card inserted\n"); @@ -167,6 +217,19 @@ static struct net_device * __init apne_probe(void) pr_cont("ethernet PCMCIA card inserted\n"); +#if IS_REACHABLE(CONFIG_PCMCIA) + if (apne_100_mbit < 0) { + if (pcmcia_is_16bit()) { + pr_info("16-bit PCMCIA card detected!\n"); + isa_type = ISA_TYPE_AG16; + apne_100_mbit = 1; + } else { + isa_type = ISA_TYPE_AG; + apne_100_mbit = 0; + } + } +#endif + if (!init_pcmcia()) { /* XXX: shouldn't we re-enable irq here? */ free_netdev(dev); @@ -193,6 +256,10 @@ static struct net_device * __init apne_probe(void) pcmcia_reset(); release_region(IOBASE, 0x20); free_netdev(dev); +#if IS_REACHABLE(CONFIG_PCMCIA) + isa_type = ISA_TYPE_AG; + apne_100_mbit = -1; +#endif return ERR_PTR(err); } @@ -570,6 +637,11 @@ static void __exit apne_module_exit(void) release_region(IOBASE, 0x20); free_netdev(apne_dev); + +#if IS_REACHABLE(CONFIG_PCMCIA) + isa_type = ISA_TYPE_AG; + apne_100_mbit = -1; +#endif } module_init(apne_module_init); module_exit(apne_module_exit); @@ -583,6 +655,16 @@ static int init_pcmcia(void) #endif u_long offset; + /* reset card (idea taken from CardReset by Artur Pogoda) */ + if (isa_type == ISA_TYPE_AG16) { + u_char tmp = gayle.intreq; + + gayle.intreq = 0xff; + mdelay(1); + gayle.intreq = tmp; + mdelay(300); + } + pcmcia_reset(); pcmcia_program_voltage(PCMCIA_0V); pcmcia_access_speed(PCMCIA_SPEED_250NS);