[v1,1/4] can: hi311x: Use devm_clk_get_optional() to get the input clock

Commit Message

Andy Shevchenko Dec. 6, 2021, 4:23 p.m. UTC

It's not clear what was the intention of redundant usage of IS_ERR()
around the clock pointer since with the error check of devm_clk_get()
followed by bailout it can't be invalid,

Simplify the code which fetches the input clock by using
devm_clk_get_optional(). It will allow to switch to device properties
approach in the future.

Signed-off-by: Andy Shevchenko <[e-mail]>
---
 drivers/net/can/spi/hi311x.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

Patch

diff --git a/drivers/net/can/spi/hi311x.c b/drivers/net/can/spi/hi311x.c
index 89d9c986a229..13fb979645cf 100644
--- a/drivers/net/can/spi/hi311x.c
+++ b/drivers/net/can/spi/hi311x.c
@@ -835,7 +835,7 @@  static int hi3110_can_probe(struct spi_device *spi)
 	struct clk *clk;
 	int freq, ret;
 
-	clk = devm_clk_get(&spi->dev, NULL);
+	clk = devm_clk_get_optional(&spi->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&spi->dev, "no CAN clock source defined\n");
 		return PTR_ERR(clk);
@@ -851,11 +851,9 @@  static int hi3110_can_probe(struct spi_device *spi)
 	if (!net)
 		return -ENOMEM;
 
-	if (!IS_ERR(clk)) {
-		ret = clk_prepare_enable(clk);
-		if (ret)
-			goto out_free;
-	}
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		goto out_free;
 
 	net->netdev_ops = &hi3110_netdev_ops;
 	net->flags |= IFF_ECHO;
@@ -938,8 +936,7 @@  static int hi3110_can_probe(struct spi_device *spi)
 	hi3110_power_enable(priv->power, 0);
 
  out_clk:
-	if (!IS_ERR(clk))
-		clk_disable_unprepare(clk);
+	clk_disable_unprepare(clk);
 
  out_free:
 	free_candev(net);
@@ -957,8 +954,7 @@  static int hi3110_can_remove(struct spi_device *spi)
 
 	hi3110_power_enable(priv->power, 0);
 
-	if (!IS_ERR(priv->clk))
-		clk_disable_unprepare(priv->clk);
+	clk_disable_unprepare(priv->clk);
 
 	free_candev(net);