Message ID | 20211218081425.18722-2-luizluca@gmail.com (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | [net-next,v2,01/13] dt-bindings: net: dsa: realtek-smi: mark unsupported switches | expand |
On Sat, Dec 18, 2021 at 9:14 AM Luiz Angelo Daros de Luca <luizluca@gmail.com> wrote: > Some listed switches are not really supported yet. > > Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com> > Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> (...) > - "realtek,rtl8366" > + "realtek,rtl8366" (not supported yet) This is still Linuxisms, (not supported yet) does not belong in the DT bindings. When the NetBSD developers (who use device tree) read this what are they supposed to think? That it is not supported yet on NetBSD? Or U-Boot? Windows? Please just drop these. Yours, Linus Walleij
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt index 7959ec237983..ec96b4035ed5 100644 --- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt +++ b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt @@ -4,20 +4,21 @@ Realtek SMI-based Switches The SMI "Simple Management Interface" is a two-wire protocol using bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does not use the MDIO protocol. This binding defines how to specify the -SMI-based Realtek devices. +SMI-based Realtek devices. The realtek-smi driver is a platform driver +and it must be inserted inside a platform node. Required properties: - compatible: must be exactly one of: "realtek,rtl8365mb" (4+1 ports) - "realtek,rtl8366" + "realtek,rtl8366" (not supported yet) "realtek,rtl8366rb" (4+1 ports) - "realtek,rtl8366s" (4+1 ports) - "realtek,rtl8367" - "realtek,rtl8367b" - "realtek,rtl8368s" (8 port) - "realtek,rtl8369" - "realtek,rtl8370" (8 port) + "realtek,rtl8366s" (4+1 ports) (not supported yet) + "realtek,rtl8367" (not supported yet) + "realtek,rtl8367b" (not supported yet) + "realtek,rtl8368s" (8 port) (not supported yet) + "realtek,rtl8369" (not supported yet) + "realtek,rtl8370" (8 port) (not supported yet) Required properties: - mdc-gpios: GPIO line for the MDC clock line.