diff mbox series

[v3,10/41] net: ieee802154: Drop duration settings when the core does it already

Message ID 20220117115440.60296-11-miquel.raynal@bootlin.com (mailing list archive)
State Not Applicable
Delegated to: Netdev Maintainers
Headers show
Series IEEE 802.15.4 scan support | expand

Checks

Context Check Description
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count fail Series longer than 15 patches (and no cover letter)
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 3 this patch: 3
netdev/cc_maintainers warning 1 maintainers not CCed: davem@davemloft.net
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 3 this patch: 3
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 138 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Miquel Raynal Jan. 17, 2022, 11:54 a.m. UTC 
The core now knows how to set the symbol duration in a few cases, when
drivers correctly advertise the protocols used on each channel. For
these drivers, there is no more need to bother with symbol duration,
lifs and sifs periods so just drop the duplicated code.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/net/ieee802154/at86rf230.c | 33 ------------------------------
 drivers/net/ieee802154/atusb.c     | 33 ------------------------------
 drivers/net/ieee802154/ca8210.c    |  1 -
 drivers/net/ieee802154/mcr20a.c    |  5 -----
 4 files changed, 72 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index e58b0dc64364..583f835c317a 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1055,36 +1055,6 @@  at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
 	if (rc < 0)
 		return rc;
 
-	/* This sets the symbol_duration according frequency on the 212.
-	 * TODO move this handling while set channel and page in cfg802154.
-	 * We can do that, this timings are according 802.15.4 standard.
-	 * If we do that in cfg802154, this is a more generic calculation.
-	 *
-	 * This should also protected from ifs_timer. Means cancel timer and
-	 * init with a new value. For now, this is okay.
-	 */
-	if (channel == 0) {
-		if (page == 0) {
-			/* SUB:0 and BPSK:0 -> BPSK-20 */
-			lp->hw->phy->symbol_duration = 50 * NSEC_PER_USEC;
-		} else {
-			/* SUB:1 and BPSK:0 -> BPSK-40 */
-			lp->hw->phy->symbol_duration = 25 * NSEC_PER_USEC;
-		}
-	} else {
-		if (page == 0)
-			/* SUB:0 and BPSK:1 -> OQPSK-100/200/400 */
-			lp->hw->phy->symbol_duration = 40 * NSEC_PER_USEC;
-		else
-			/* SUB:1 and BPSK:1 -> OQPSK-250/500/1000 */
-			lp->hw->phy->symbol_duration = 16 * NSEC_PER_USEC;
-	}
-
-	lp->hw->phy->lifs_period =
-		(IEEE802154_LIFS_PERIOD * lp->hw->phy->symbol_duration) / 1000;
-	lp->hw->phy->sifs_period =
-		(IEEE802154_SIFS_PERIOD * lp->hw->phy->symbol_duration) / 1000;
-
 	return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
 }
 
@@ -1563,7 +1533,6 @@  at86rf230_detect_device(struct at86rf230_local *lp)
 		lp->hw->phy->supported.page[0].chunk[0].protocol = IEEE802154_OQPSK_PHY;
 		lp->hw->phy->supported.page[0].chunk[0].band = IEEE802154_2400_MHZ_BAND;
 		lp->hw->phy->current_channel = 11;
-		lp->hw->phy->symbol_duration = 16 * NSEC_PER_USEC;
 		lp->hw->phy->supported.tx_powers = at86rf231_powers;
 		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers);
 		lp->hw->phy->supported.cca_ed_levels = at86rf231_ed_levels;
@@ -1595,7 +1564,6 @@  at86rf230_detect_device(struct at86rf230_local *lp)
 		lp->hw->phy->supported.page[2].chunk[1].band = IEEE802154_915_MHZ_BAND;
 
 		lp->hw->phy->current_channel = 5;
-		lp->hw->phy->symbol_duration = 25 * NSEC_PER_USEC;
 		lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
 		lp->hw->phy->supported.tx_powers = at86rf212_powers;
 		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
@@ -1610,7 +1578,6 @@  at86rf230_detect_device(struct at86rf230_local *lp)
 		lp->hw->phy->supported.page[0].chunk[0].protocol = IEEE802154_OQPSK_PHY;
 		lp->hw->phy->supported.page[0].chunk[0].band = IEEE802154_2400_MHZ_BAND;
 		lp->hw->phy->current_channel = 13;
-		lp->hw->phy->symbol_duration = 16 * NSEC_PER_USEC;
 		lp->hw->phy->supported.tx_powers = at86rf233_powers;
 		lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers);
 		lp->hw->phy->supported.cca_ed_levels = at86rf233_ed_levels;
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index 80382919520e..1a56073c1c52 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -667,36 +667,6 @@  static int hulusb_set_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
 	if (rc < 0)
 		return rc;
 
-	/* This sets the symbol_duration according frequency on the 212.
-	 * TODO move this handling while set channel and page in cfg802154.
-	 * We can do that, this timings are according 802.15.4 standard.
-	 * If we do that in cfg802154, this is a more generic calculation.
-	 *
-	 * This should also protected from ifs_timer. Means cancel timer and
-	 * init with a new value. For now, this is okay.
-	 */
-	if (channel == 0) {
-		if (page == 0) {
-			/* SUB:0 and BPSK:0 -> BPSK-20 */
-			lp->hw->phy->symbol_duration = 50 * NSEC_PER_USEC;
-		} else {
-			/* SUB:1 and BPSK:0 -> BPSK-40 */
-			lp->hw->phy->symbol_duration = 25 * NSEC_PER_USEC;
-		}
-	} else {
-		if (page == 0)
-			/* SUB:0 and BPSK:1 -> OQPSK-100/200/400 */
-			lp->hw->phy->symbol_duration = 40 * NSEC_PER_USEC;
-		else
-			/* SUB:1 and BPSK:1 -> OQPSK-250/500/1000 */
-			lp->hw->phy->symbol_duration = 16 * NSEC_PER_USEC;
-	}
-
-	lp->hw->phy->lifs_period =
-		(IEEE802154_LIFS_PERIOD * lp->hw->phy->symbol_duration) / 1000;
-	lp->hw->phy->sifs_period =
-		(IEEE802154_SIFS_PERIOD * lp->hw->phy->symbol_duration) / 1000;
-
 	return atusb_write_subreg(lp, SR_CHANNEL, channel);
 }
 
@@ -919,7 +889,6 @@  static int atusb_get_and_conf_chip(struct atusb *atusb)
 		atusb->hw->phy->supported.page[0].chunk[0].protocol = IEEE802154_OQPSK_PHY;
 		atusb->hw->phy->supported.page[0].chunk[0].band = IEEE802154_2400_MHZ_BAND;
 		atusb->hw->phy->current_channel = 11;	/* reset default */
-		atusb->hw->phy->symbol_duration = 16 * NSEC_PER_USEC;
 		atusb->hw->phy->supported.tx_powers = atusb_powers;
 		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
 		hw->phy->supported.cca_ed_levels = atusb_ed_levels;
@@ -932,7 +901,6 @@  static int atusb_get_and_conf_chip(struct atusb *atusb)
 		atusb->hw->phy->supported.page[0].chunk[0].protocol = IEEE802154_OQPSK_PHY;
 		atusb->hw->phy->supported.page[0].chunk[0].band = IEEE802154_2400_MHZ_BAND;
 		atusb->hw->phy->current_channel = 11;	/* reset default */
-		atusb->hw->phy->symbol_duration = 16 * NSEC_PER_USEC;
 		atusb->hw->phy->supported.tx_powers = atusb_powers;
 		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
 		hw->phy->supported.cca_ed_levels = atusb_ed_levels;
@@ -963,7 +931,6 @@  static int atusb_get_and_conf_chip(struct atusb *atusb)
 		atusb->hw->phy->supported.page[2].chunk[1].band = IEEE802154_915_MHZ_BAND;
 
 		atusb->hw->phy->current_channel = 5;
-		atusb->hw->phy->symbol_duration = 25 * NSEC_PER_USEC;
 		atusb->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
 		atusb->hw->phy->supported.tx_powers = at86rf212_powers;
 		atusb->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
diff --git a/drivers/net/ieee802154/ca8210.c b/drivers/net/ieee802154/ca8210.c
index 6bd970d26220..d3a9e4fe05f4 100644
--- a/drivers/net/ieee802154/ca8210.c
+++ b/drivers/net/ieee802154/ca8210.c
@@ -2977,7 +2977,6 @@  static void ca8210_hw_setup(struct ieee802154_hw *ca8210_hw)
 	ca8210_hw->phy->cca.mode = NL802154_CCA_ENERGY_CARRIER;
 	ca8210_hw->phy->cca.opt = NL802154_CCA_OPT_ENERGY_CARRIER_AND;
 	ca8210_hw->phy->cca_ed_level = -9800;
-	ca8210_hw->phy->symbol_duration = 16 * NSEC_PER_USEC;
 	ca8210_hw->phy->lifs_period = 40;
 	ca8210_hw->phy->sifs_period = 12;
 	ca8210_hw->flags =
diff --git a/drivers/net/ieee802154/mcr20a.c b/drivers/net/ieee802154/mcr20a.c
index 34063b7e663e..8d12c2968302 100644
--- a/drivers/net/ieee802154/mcr20a.c
+++ b/drivers/net/ieee802154/mcr20a.c
@@ -975,10 +975,6 @@  static void mcr20a_hw_setup(struct mcr20a_local *lp)
 
 	dev_dbg(printdev(lp), "%s\n", __func__);
 
-	phy->symbol_duration = 16 * NSEC_PER_USEC;
-	phy->lifs_period = (40 * phy->symbol_duration) / NSEC_PER_USEC;
-	phy->sifs_period = (12 * phy->symbol_duration) / NSEC_PER_USEC;
-
 	hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
 			IEEE802154_HW_AFILT |
 			IEEE802154_HW_PROMISCUOUS;
@@ -1010,7 +1006,6 @@  static void mcr20a_hw_setup(struct mcr20a_local *lp)
 	phy->current_page = 0;
 	/* MCR20A default reset value */
 	phy->current_channel = 20;
-	phy->symbol_duration = 16 * NSEC_PER_USEC;
 	phy->supported.tx_powers = mcr20a_powers;
 	phy->supported.tx_powers_size = ARRAY_SIZE(mcr20a_powers);
 	phy->cca_ed_level = phy->supported.cca_ed_levels[75];