diff mbox series

[net-next,v4,2/3] net: macb: Added ZynqMP-specific initialization

Message ID 20220127163736.3677478-3-robert.hancock@calian.com (mailing list archive)
State Accepted
Commit 8b73fa3ae02b2401960de41b0454c0321377b203
Delegated to: Netdev Maintainers
Headers show
Series Cadence MACB/GEM support for ZynqMP SGMII | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 25 this patch: 25
netdev/cc_maintainers success CCed 6 of 6 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 25 this patch: 25
netdev/checkpatch warning WARNING: line length of 82 exceeds 80 columns
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Robert Hancock Jan. 27, 2022, 4:37 p.m. UTC
The GEM controllers on ZynqMP were missing some initialization steps which
are required in some cases when using SGMII mode, which uses the PS-GTR
transceivers managed by the phy-zynqmp driver.

The GEM core appears to need a hardware-level reset in order to work
properly in SGMII mode in cases where the GT reference clock was not
present at initial power-on. This can be done using a reset mapped to
the zynqmp-reset driver in the device tree.

Also, when in SGMII mode, the GEM driver needs to ensure the PHY is
initialized and powered on.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
---
 drivers/net/ethernet/cadence/macb.h      |  4 ++
 drivers/net/ethernet/cadence/macb_main.c | 63 ++++++++++++++++++++++--
 2 files changed, 64 insertions(+), 3 deletions(-)

Comments

Claudiu Beznea Jan. 28, 2022, 8:21 a.m. UTC | #1
On 27.01.2022 18:37, Robert Hancock wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> The GEM controllers on ZynqMP were missing some initialization steps which
> are required in some cases when using SGMII mode, which uses the PS-GTR
> transceivers managed by the phy-zynqmp driver.
> 
> The GEM core appears to need a hardware-level reset in order to work
> properly in SGMII mode in cases where the GT reference clock was not
> present at initial power-on. This can be done using a reset mapped to
> the zynqmp-reset driver in the device tree.
> 
> Also, when in SGMII mode, the GEM driver needs to ensure the PHY is
> initialized and powered on.
> 
> Signed-off-by: Robert Hancock <robert.hancock@calian.com>

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>


> ---
>  drivers/net/ethernet/cadence/macb.h      |  4 ++
>  drivers/net/ethernet/cadence/macb_main.c | 63 ++++++++++++++++++++++--
>  2 files changed, 64 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
> index 9ddbee7de72b..f0a7d8396a4a 100644
> --- a/drivers/net/ethernet/cadence/macb.h
> +++ b/drivers/net/ethernet/cadence/macb.h
> @@ -12,6 +12,7 @@
>  #include <linux/ptp_clock_kernel.h>
>  #include <linux/net_tstamp.h>
>  #include <linux/interrupt.h>
> +#include <linux/phy/phy.h>
> 
>  #if defined(CONFIG_ARCH_DMA_ADDR_T_64BIT) || defined(CONFIG_MACB_USE_HWSTAMP)
>  #define MACB_EXT_DESC
> @@ -1291,6 +1292,9 @@ struct macb {
>         u32                     wol;
> 
>         struct macb_ptp_info    *ptp_info;      /* macb-ptp interface */
> +
> +       struct phy              *sgmii_phy;     /* for ZynqMP SGMII mode */
> +
>  #ifdef MACB_EXT_DESC
>         uint8_t hw_dma_cap;
>  #endif
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index a363da928e8b..1ce20bf52f72 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -34,7 +34,9 @@
>  #include <linux/udp.h>
>  #include <linux/tcp.h>
>  #include <linux/iopoll.h>
> +#include <linux/phy/phy.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/reset.h>
>  #include "macb.h"
> 
>  /* This structure is only used for MACB on SiFive FU540 devices */
> @@ -2739,10 +2741,14 @@ static int macb_open(struct net_device *dev)
> 
>         macb_init_hw(bp);
> 
> -       err = macb_phylink_connect(bp);
> +       err = phy_power_on(bp->sgmii_phy);
>         if (err)
>                 goto reset_hw;
> 
> +       err = macb_phylink_connect(bp);
> +       if (err)
> +               goto phy_off;
> +
>         netif_tx_start_all_queues(dev);
> 
>         if (bp->ptp_info)
> @@ -2750,6 +2756,9 @@ static int macb_open(struct net_device *dev)
> 
>         return 0;
> 
> +phy_off:
> +       phy_power_off(bp->sgmii_phy);
> +
>  reset_hw:
>         macb_reset_hw(bp);
>         for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
> @@ -2775,6 +2784,8 @@ static int macb_close(struct net_device *dev)
>         phylink_stop(bp->phylink);
>         phylink_disconnect_phy(bp->phylink);
> 
> +       phy_power_off(bp->sgmii_phy);
> +
>         spin_lock_irqsave(&bp->lock, flags);
>         macb_reset_hw(bp);
>         netif_carrier_off(dev);
> @@ -4544,13 +4555,55 @@ static const struct macb_config np4_config = {
>         .usrio = &macb_default_usrio,
>  };
> 
> +static int zynqmp_init(struct platform_device *pdev)
> +{
> +       struct net_device *dev = platform_get_drvdata(pdev);
> +       struct macb *bp = netdev_priv(dev);
> +       int ret;
> +
> +       if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
> +               /* Ensure PS-GTR PHY device used in SGMII mode is ready */
> +               bp->sgmii_phy = devm_phy_get(&pdev->dev, "sgmii-phy");
> +
> +               if (IS_ERR(bp->sgmii_phy)) {
> +                       ret = PTR_ERR(bp->sgmii_phy);
> +                       dev_err_probe(&pdev->dev, ret,
> +                                     "failed to get PS-GTR PHY\n");
> +                       return ret;
> +               }
> +
> +               ret = phy_init(bp->sgmii_phy);
> +               if (ret) {
> +                       dev_err(&pdev->dev, "failed to init PS-GTR PHY: %d\n",
> +                               ret);
> +                       return ret;
> +               }
> +       }
> +
> +       /* Fully reset GEM controller at hardware level using zynqmp-reset driver,
> +        * if mapped in device tree.
> +        */
> +       ret = device_reset_optional(&pdev->dev);
> +       if (ret) {
> +               dev_err_probe(&pdev->dev, ret, "failed to reset controller");
> +               phy_exit(bp->sgmii_phy);
> +               return ret;
> +       }
> +
> +       ret = macb_init(pdev);
> +       if (ret)
> +               phy_exit(bp->sgmii_phy);
> +
> +       return ret;
> +}
> +
>  static const struct macb_config zynqmp_config = {
>         .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
>                         MACB_CAPS_JUMBO |
>                         MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH,
>         .dma_burst_length = 16,
>         .clk_init = macb_clk_init,
> -       .init = macb_init,
> +       .init = zynqmp_init,
>         .jumbo_max_len = 10240,
>         .usrio = &macb_default_usrio,
>  };
> @@ -4767,7 +4820,7 @@ static int macb_probe(struct platform_device *pdev)
> 
>         err = macb_mii_init(bp);
>         if (err)
> -               goto err_out_free_netdev;
> +               goto err_out_phy_exit;
> 
>         netif_carrier_off(dev);
> 
> @@ -4792,6 +4845,9 @@ static int macb_probe(struct platform_device *pdev)
>         mdiobus_unregister(bp->mii_bus);
>         mdiobus_free(bp->mii_bus);
> 
> +err_out_phy_exit:
> +       phy_exit(bp->sgmii_phy);
> +
>  err_out_free_netdev:
>         free_netdev(dev);
> 
> @@ -4813,6 +4869,7 @@ static int macb_remove(struct platform_device *pdev)
> 
>         if (dev) {
>                 bp = netdev_priv(dev);
> +               phy_exit(bp->sgmii_phy);
>                 mdiobus_unregister(bp->mii_bus);
>                 mdiobus_free(bp->mii_bus);
> 
> --
> 2.31.1
>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 9ddbee7de72b..f0a7d8396a4a 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -12,6 +12,7 @@ 
 #include <linux/ptp_clock_kernel.h>
 #include <linux/net_tstamp.h>
 #include <linux/interrupt.h>
+#include <linux/phy/phy.h>
 
 #if defined(CONFIG_ARCH_DMA_ADDR_T_64BIT) || defined(CONFIG_MACB_USE_HWSTAMP)
 #define MACB_EXT_DESC
@@ -1291,6 +1292,9 @@  struct macb {
 	u32			wol;
 
 	struct macb_ptp_info	*ptp_info;	/* macb-ptp interface */
+
+	struct phy		*sgmii_phy;	/* for ZynqMP SGMII mode */
+
 #ifdef MACB_EXT_DESC
 	uint8_t hw_dma_cap;
 #endif
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index a363da928e8b..1ce20bf52f72 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -34,7 +34,9 @@ 
 #include <linux/udp.h>
 #include <linux/tcp.h>
 #include <linux/iopoll.h>
+#include <linux/phy/phy.h>
 #include <linux/pm_runtime.h>
+#include <linux/reset.h>
 #include "macb.h"
 
 /* This structure is only used for MACB on SiFive FU540 devices */
@@ -2739,10 +2741,14 @@  static int macb_open(struct net_device *dev)
 
 	macb_init_hw(bp);
 
-	err = macb_phylink_connect(bp);
+	err = phy_power_on(bp->sgmii_phy);
 	if (err)
 		goto reset_hw;
 
+	err = macb_phylink_connect(bp);
+	if (err)
+		goto phy_off;
+
 	netif_tx_start_all_queues(dev);
 
 	if (bp->ptp_info)
@@ -2750,6 +2756,9 @@  static int macb_open(struct net_device *dev)
 
 	return 0;
 
+phy_off:
+	phy_power_off(bp->sgmii_phy);
+
 reset_hw:
 	macb_reset_hw(bp);
 	for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
@@ -2775,6 +2784,8 @@  static int macb_close(struct net_device *dev)
 	phylink_stop(bp->phylink);
 	phylink_disconnect_phy(bp->phylink);
 
+	phy_power_off(bp->sgmii_phy);
+
 	spin_lock_irqsave(&bp->lock, flags);
 	macb_reset_hw(bp);
 	netif_carrier_off(dev);
@@ -4544,13 +4555,55 @@  static const struct macb_config np4_config = {
 	.usrio = &macb_default_usrio,
 };
 
+static int zynqmp_init(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+	struct macb *bp = netdev_priv(dev);
+	int ret;
+
+	if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
+		/* Ensure PS-GTR PHY device used in SGMII mode is ready */
+		bp->sgmii_phy = devm_phy_get(&pdev->dev, "sgmii-phy");
+
+		if (IS_ERR(bp->sgmii_phy)) {
+			ret = PTR_ERR(bp->sgmii_phy);
+			dev_err_probe(&pdev->dev, ret,
+				      "failed to get PS-GTR PHY\n");
+			return ret;
+		}
+
+		ret = phy_init(bp->sgmii_phy);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to init PS-GTR PHY: %d\n",
+				ret);
+			return ret;
+		}
+	}
+
+	/* Fully reset GEM controller at hardware level using zynqmp-reset driver,
+	 * if mapped in device tree.
+	 */
+	ret = device_reset_optional(&pdev->dev);
+	if (ret) {
+		dev_err_probe(&pdev->dev, ret, "failed to reset controller");
+		phy_exit(bp->sgmii_phy);
+		return ret;
+	}
+
+	ret = macb_init(pdev);
+	if (ret)
+		phy_exit(bp->sgmii_phy);
+
+	return ret;
+}
+
 static const struct macb_config zynqmp_config = {
 	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
 			MACB_CAPS_JUMBO |
 			MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH,
 	.dma_burst_length = 16,
 	.clk_init = macb_clk_init,
-	.init = macb_init,
+	.init = zynqmp_init,
 	.jumbo_max_len = 10240,
 	.usrio = &macb_default_usrio,
 };
@@ -4767,7 +4820,7 @@  static int macb_probe(struct platform_device *pdev)
 
 	err = macb_mii_init(bp);
 	if (err)
-		goto err_out_free_netdev;
+		goto err_out_phy_exit;
 
 	netif_carrier_off(dev);
 
@@ -4792,6 +4845,9 @@  static int macb_probe(struct platform_device *pdev)
 	mdiobus_unregister(bp->mii_bus);
 	mdiobus_free(bp->mii_bus);
 
+err_out_phy_exit:
+	phy_exit(bp->sgmii_phy);
+
 err_out_free_netdev:
 	free_netdev(dev);
 
@@ -4813,6 +4869,7 @@  static int macb_remove(struct platform_device *pdev)
 
 	if (dev) {
 		bp = netdev_priv(dev);
+		phy_exit(bp->sgmii_phy);
 		mdiobus_unregister(bp->mii_bus);
 		mdiobus_free(bp->mii_bus);