@@ -18,6 +18,11 @@
#include "lan743x_main.h"
#include "lan743x_ethtool.h"
+#define MMD_ACCESS_ADDRESS 0
+#define MMD_ACCESS_WRITE 1
+#define MMD_ACCESS_READ 2
+#define MMD_ACCESS_READ_INC 3
+
static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
{
u32 chip_rev;
@@ -814,6 +819,96 @@ static int lan743x_mdiobus_write(struct mii_bus *bus,
return ret;
}
+static u32 lan743x_mac_mmd_access(int id, int index, int op)
+{
+ u16 dev_addr;
+ u32 ret;
+
+ dev_addr = (index >> 16) & 0x1f;
+ ret = (id << MAC_MII_ACC_PHY_ADDR_SHIFT_) &
+ MAC_MII_ACC_PHY_ADDR_MASK_;
+ ret |= (dev_addr << MAC_MII_ACC_MIIMMD_SHIFT_) &
+ MAC_MII_ACC_MIIMMD_MASK_;
+ if (op == MMD_ACCESS_WRITE)
+ ret |= MAC_MII_ACC_MIICMD_WRITE_;
+ else if (op == MMD_ACCESS_READ)
+ ret |= MAC_MII_ACC_MIICMD_READ_;
+ else if (op == MMD_ACCESS_READ_INC)
+ ret |= MAC_MII_ACC_MIICMD_READ_INC_;
+ else
+ ret |= MAC_MII_ACC_MIICMD_ADDR_;
+ ret |= (MAC_MII_ACC_MII_BUSY_ | MAC_MII_ACC_MIICL45_);
+
+ return ret;
+}
+
+static int lan743x_mdiobus_c45_read(struct mii_bus *bus, int phy_id, int index)
+{
+ struct lan743x_adapter *adapter = bus->priv;
+ u32 mmd_access;
+ int ret;
+
+ /* comfirm MII not busy */
+ ret = lan743x_mac_mii_wait_till_not_busy(adapter);
+ if (ret < 0)
+ return ret;
+ if (index & MII_ADDR_C45) {
+ /* Load Register Address */
+ lan743x_csr_write(adapter, MAC_MII_DATA, (u32)(index & 0xffff));
+ mmd_access = lan743x_mac_mmd_access(phy_id, index,
+ MMD_ACCESS_ADDRESS);
+ lan743x_csr_write(adapter, MAC_MII_ACC, mmd_access);
+ ret = lan743x_mac_mii_wait_till_not_busy(adapter);
+ if (ret < 0)
+ return ret;
+ /* Read Data */
+ mmd_access = lan743x_mac_mmd_access(phy_id, index,
+ MMD_ACCESS_READ);
+ lan743x_csr_write(adapter, MAC_MII_ACC, mmd_access);
+ ret = lan743x_mac_mii_wait_till_not_busy(adapter);
+ if (ret < 0)
+ return ret;
+ ret = lan743x_csr_read(adapter, MAC_MII_DATA);
+ return (int)(ret & 0xFFFF);
+ }
+
+ ret = lan743x_mdiobus_read(bus, phy_id, index);
+ return ret;
+}
+
+static int lan743x_mdiobus_c45_write(struct mii_bus *bus,
+ int phy_id, int index, u16 regval)
+{
+ struct lan743x_adapter *adapter = bus->priv;
+ u32 mmd_access;
+ int ret;
+
+ /* confirm MII not busy */
+ ret = lan743x_mac_mii_wait_till_not_busy(adapter);
+ if (ret < 0)
+ return ret;
+ if (index & MII_ADDR_C45) {
+ /* Load Register Address */
+ lan743x_csr_write(adapter, MAC_MII_DATA, (u32)(index & 0xffff));
+ mmd_access = lan743x_mac_mmd_access(phy_id, index,
+ MMD_ACCESS_ADDRESS);
+ lan743x_csr_write(adapter, MAC_MII_ACC, mmd_access);
+ ret = lan743x_mac_mii_wait_till_not_busy(adapter);
+ if (ret < 0)
+ return ret;
+ /* Write Data */
+ lan743x_csr_write(adapter, MAC_MII_DATA, (u32)regval);
+ mmd_access = lan743x_mac_mmd_access(phy_id, index,
+ MMD_ACCESS_WRITE);
+ lan743x_csr_write(adapter, MAC_MII_ACC, mmd_access);
+ ret = lan743x_mac_mii_wait_till_not_busy(adapter);
+ } else {
+ ret = lan743x_mdiobus_write(bus, phy_id, index, regval);
+ }
+
+ return ret;
+}
+
static void lan743x_mac_set_address(struct lan743x_adapter *adapter,
u8 *addr)
{
@@ -2847,11 +2942,19 @@ static int lan743x_mdiobus_init(struct lan743x_adapter *adapter)
netif_dbg(adapter, drv, adapter->netdev,
"(R)GMII operation\n");
}
+
+ adapter->mdiobus->probe_capabilities = MDIOBUS_C22_C45;
+ adapter->mdiobus->read = lan743x_mdiobus_c45_read;
+ adapter->mdiobus->write = lan743x_mdiobus_c45_write;
+ adapter->mdiobus->name = "lan743x-mdiobus-c45";
+ netif_dbg(adapter, drv, adapter->netdev, "lan743x-mdiobus-c45\n");
+ } else {
+ adapter->mdiobus->read = lan743x_mdiobus_read;
+ adapter->mdiobus->write = lan743x_mdiobus_write;
+ adapter->mdiobus->name = "lan743x-mdiobus";
+ netif_dbg(adapter, drv, adapter->netdev, "lan743x-mdiobus\n");
}
- adapter->mdiobus->read = lan743x_mdiobus_read;
- adapter->mdiobus->write = lan743x_mdiobus_write;
- adapter->mdiobus->name = "lan743x-mdiobus";
snprintf(adapter->mdiobus->id, MII_BUS_ID_SIZE,
"pci-%s", pci_name(adapter->pdev));
@@ -151,6 +151,13 @@
#define MAC_RX_ADDRL (0x11C)
#define MAC_MII_ACC (0x120)
+#define MAC_MII_ACC_MDC_CYCLE_SHIFT_ (16)
+#define MAC_MII_ACC_MDC_CYCLE_MASK_ (0x00070000)
+#define MAC_MII_ACC_MDC_CYCLE_2_5MHZ_ (0)
+#define MAC_MII_ACC_MDC_CYCLE_5MHZ_ (1)
+#define MAC_MII_ACC_MDC_CYCLE_12_5MHZ_ (2)
+#define MAC_MII_ACC_MDC_CYCLE_25MHZ_ (3)
+#define MAC_MII_ACC_MDC_CYCLE_1_25MHZ_ (4)
#define MAC_MII_ACC_PHY_ADDR_SHIFT_ (11)
#define MAC_MII_ACC_PHY_ADDR_MASK_ (0x0000F800)
#define MAC_MII_ACC_MIIRINDA_SHIFT_ (6)
@@ -159,6 +166,15 @@
#define MAC_MII_ACC_MII_WRITE_ (0x00000002)
#define MAC_MII_ACC_MII_BUSY_ BIT(0)
+#define MAC_MII_ACC_MIIMMD_SHIFT_ (6)
+#define MAC_MII_ACC_MIIMMD_MASK_ (0x000007C0)
+#define MAC_MII_ACC_MIICL45_ BIT(3)
+#define MAC_MII_ACC_MIICMD_MASK_ (0x00000006)
+#define MAC_MII_ACC_MIICMD_ADDR_ (0x00000000)
+#define MAC_MII_ACC_MIICMD_WRITE_ (0x00000002)
+#define MAC_MII_ACC_MIICMD_READ_ (0x00000004)
+#define MAC_MII_ACC_MIICMD_READ_INC_ (0x00000006)
+
#define MAC_MII_DATA (0x124)
#define MAC_EEE_TX_LPI_REQ_DLY_CNT (0x130)
Add support for Clause-45 MDIO PHY management Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> --- Changes: V1: 1. Remove "freq" argument in lan743x_mac_mmd_access( ) function 2. Define MMD Operation macros instead of values drivers/net/ethernet/microchip/lan743x_main.c | 109 +++++++++++++++++- drivers/net/ethernet/microchip/lan743x_main.h | 16 +++ 2 files changed, 122 insertions(+), 3 deletions(-)