diff mbox series

[net-next,10/14] mlxsw: reg: Fix packing of router interface counters

Message ID 20220224133335.599529-11-idosch@nvidia.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series HW counters for soft devices | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 5 of 5 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 17 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Ido Schimmel Feb. 24, 2022, 1:33 p.m. UTC 
From: Petr Machata <petrm@nvidia.com>

The function mlxsw_reg_ritr_counter_pack() formats a register to configure
a router interface (RIF) counter. The parameter `egress' determines whether
an ingress or egress counter is to be configured. RITR, the register in
question, has two sets of counter-related fields: one for ingress, one for
egress. When setting values of the fields, the function sets the proper
counter index field, but when setting the counter type, it always sets the
egress field. Thus configuration of ingress counters is broken, and in fact
an attempt to configure an ingress counter mangles a previously configured
egress counter.

This was never discovered, because there is currently no way to enable
ingress counters on a router interface, only the egress one.

Fix in an obvious way.

Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlxsw/reg.h | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index dce21daaf330..67b1a2f8397f 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -6784,12 +6784,14 @@  static inline void mlxsw_reg_ritr_counter_pack(char *payload, u32 index,
 		set_type = MLXSW_REG_RITR_COUNTER_SET_TYPE_BASIC;
 	else
 		set_type = MLXSW_REG_RITR_COUNTER_SET_TYPE_NO_COUNT;
-	mlxsw_reg_ritr_egress_counter_set_type_set(payload, set_type);
 
-	if (egress)
+	if (egress) {
+		mlxsw_reg_ritr_egress_counter_set_type_set(payload, set_type);
 		mlxsw_reg_ritr_egress_counter_index_set(payload, index);
-	else
+	} else {
+		mlxsw_reg_ritr_ingress_counter_set_type_set(payload, set_type);
 		mlxsw_reg_ritr_ingress_counter_index_set(payload, index);
+	}
 }
 
 static inline void mlxsw_reg_ritr_rif_pack(char *payload, u16 rif)