@@ -159,6 +159,17 @@ flooding_remotes_add()
local lsb
local i
+ # Prevent unwanted packets from entering the bridge and interfering
+ # with the test.
+ tc qdisc add dev br0 clsact
+ tc filter add dev br0 egress protocol all pref 1 handle 1 \
+ matchall skip_hw action drop
+ tc qdisc add dev $h1 clsact
+ tc filter add dev $h1 egress protocol all pref 1 handle 1 \
+ flower skip_hw dst_mac de:ad:be:ef:13:37 action pass
+ tc filter add dev $h1 egress protocol all pref 2 handle 2 \
+ matchall skip_hw action drop
+
for i in $(eval echo {1..$num_remotes}); do
lsb=$((i + 1))
@@ -195,6 +206,12 @@ flooding_filters_del()
done
tc qdisc del dev $rp2 clsact
+
+ tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall
+ tc filter del dev $h1 egress protocol all pref 1 handle 1 flower
+ tc qdisc del dev $h1 clsact
+ tc filter del dev br0 egress protocol all pref 1 handle 1 matchall
+ tc qdisc del dev br0 clsact
}
flooding_check_packets()
The test verifies that packets are correctly flooded by the bridge and the VXLAN device by matching on the encapsulated packets at the other end. However, if packets other than those generated by the test also ingress the bridge (e.g., MLD packets), they will be flooded as well and interfere with the expected count. Make the test more robust by making sure that only the packets generated by the test can ingress the bridge. Drop all the rest using tc filters on the egress of 'br0' and 'h1'. In the software data path, the problem can be solved by matching on the inner destination MAC or dropping unwanted packets at the egress of the VXLAN device, but this is not currently supported by mlxsw. Fixes: d01724dd2a66 ("selftests: mlxsw: spectrum-2: Add a test for VxLAN flooding with IPv6") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> --- .../net/mlxsw/spectrum-2/vxlan_flooding_ipv6.sh | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)