diff mbox series

[net,3/6] wireguard: selftests: use newer toolchains to fill out architectures

Message ID 20220504202920.72908-4-Jason@zx2c4.com (mailing list archive)
State Accepted
Commit d5d9b29bc963cc084c5c0f3a7c28e2632a22e0c4
Delegated to: Netdev Maintainers
Headers show
Series wireguard patches for 5.18-rc6 | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net
netdev/fixes_present fail Series targets non-next tree, but doesn't contain any Fixes tags
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 7 maintainers not CCed: wireguard@lists.zx2c4.com shuah@kernel.org linux-kselftest@vger.kernel.org aou@eecs.berkeley.edu palmer@dabbelt.com paul.walmsley@sifive.com linux-riscv@lists.infradead.org
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch warning WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Jason A. Donenfeld May 4, 2022, 8:29 p.m. UTC 
Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.

Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 .../testing/selftests/wireguard/qemu/Makefile | 169 ++++++++++++------
 .../wireguard/qemu/arch/aarch64.config        |   5 +-
 .../wireguard/qemu/arch/aarch64_be.config     |   5 +-
 .../selftests/wireguard/qemu/arch/arm.config  |   5 +-
 .../wireguard/qemu/arch/armeb.config          |   5 +-
 .../wireguard/qemu/arch/powerpc64.config      |  13 ++
 .../wireguard/qemu/arch/riscv32.config        |  12 ++
 .../wireguard/qemu/arch/riscv64.config        |  12 ++
 .../wireguard/qemu/arch/s390x.config          |   6 +
 9 files changed, 169 insertions(+), 63 deletions(-)
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/riscv32.config
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/riscv64.config
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/s390x.config
diff mbox series

Patch

diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile
index 4bdd6c1a19d3..930f59c9e714 100644
--- a/tools/testing/selftests/wireguard/qemu/Makefile
+++ b/tools/testing/selftests/wireguard/qemu/Makefile
@@ -4,26 +4,24 @@ 
 
 PWD := $(shell pwd)
 
-CHOST := $(shell gcc -dumpmachine)
-HOST_ARCH := $(firstword $(subst -, ,$(CHOST)))
-ifneq (,$(ARCH))
-CBUILD := $(subst -gcc,,$(lastword $(subst /, ,$(firstword $(wildcard $(foreach bindir,$(subst :, ,$(PATH)),$(bindir)/$(ARCH)-*-gcc))))))
-ifeq (,$(CBUILD))
-$(error The toolchain for $(ARCH) is not installed)
-endif
-else
-CBUILD := $(CHOST)
-ARCH := $(firstword $(subst -, ,$(CBUILD)))
-endif
-
 # Set these from the environment to override
 KERNEL_PATH ?= $(PWD)/../../../../..
 BUILD_PATH ?= $(PWD)/build/$(ARCH)
 DISTFILES_PATH ?= $(PWD)/distfiles
 NR_CPUS ?= 4
+ARCH ?=
+CBUILD := $(shell gcc -dumpmachine)
+HOST_ARCH := $(firstword $(subst -, ,$(CBUILD)))
+ifeq ($(ARCH),)
+ARCH := $(HOST_ARCH)
+endif
 
 MIRROR := https://download.wireguard.com/qemu-test/distfiles/
 
+KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
+rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
+WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*)
+
 default: qemu
 
 # variable name, tarball project name, version, tarball extension, default URI base
@@ -36,12 +34,11 @@  $(call file_download,$$($(1)_NAME)$(4),$(5),$(6))
 endef
 
 define file_download =
-$(DISTFILES_PATH)/$(1):
+$(DISTFILES_PATH)/$(1): | $(4)
 	mkdir -p $(DISTFILES_PATH)
-	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if echo "$(3)  $$@.tmp" | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi'
+	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if ([ -n "$(4)" ] && sed -n "s#^\([a-f0-9]\{64\}\)  \($(1)\)\$$$$#\1  $(DISTFILES_PATH)/\2.tmp#p" "$(4)" || echo "$(3)  $$@.tmp") | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi'
 endef
 
-$(eval $(call tar_download,MUSL,musl,1.2.0,.tar.gz,https://musl.libc.org/releases/,c6de7b191139142d3f9a7b5b702c9cae1b5ee6e7f57e582da9328629408fd4e8))
 $(eval $(call tar_download,IPERF,iperf,3.7,.tar.gz,https://downloads.es.net/pub/iperf/,d846040224317caf2f75c843d309a950a7db23f9b44b94688ccbe557d6d1710c))
 $(eval $(call tar_download,BASH,bash,5.0,.tar.gz,https://ftp.gnu.org/gnu/bash/,b4a80f2ac66170b2913efbfb9f2594f1f76c7b1afd11f799e22035d63077fb4d))
 $(eval $(call tar_download,IPROUTE2,iproute2,5.6.0,.tar.xz,https://www.kernel.org/pub/linux/utils/net/iproute2/,1b5b0e25ce6e23da7526ea1da044e814ad85ba761b10dd29c2b027c056b04692))
@@ -50,28 +47,20 @@  $(eval $(call tar_download,NMAP,nmap,7.80,.tar.bz2,https://nmap.org/dist/,fcfa5a
 $(eval $(call tar_download,IPUTILS,iputils,s20190709,.tar.gz,https://github.com/iputils/iputils/archive/s20190709.tar.gz/#,a15720dd741d7538dd2645f9f516d193636ae4300ff7dbc8bfca757bf166490a))
 $(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20200206,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,f5207248c6a3c3e3bfc9ab30b91c1897b00802ed861e1f9faaed873366078c64))
 
-KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
-rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
-WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*)
-
-export CFLAGS ?= -O3 -pipe
-export LDFLAGS ?=
-export CPPFLAGS := -I$(BUILD_PATH)/include
-
+export CFLAGS := -O3 -pipe
 ifeq ($(HOST_ARCH),$(ARCH))
-CROSS_COMPILE_FLAG := --host=$(CHOST)
 CFLAGS += -march=native
-STRIP := strip
-else
-$(info Cross compilation: building for $(CBUILD) using $(CHOST))
-CROSS_COMPILE_FLAG := --build=$(CBUILD) --host=$(CHOST)
-export CROSS_COMPILE=$(CBUILD)-
-STRIP := $(CBUILD)-strip
 endif
+export LDFLAGS :=
+export CPPFLAGS :=
+
+QEMU_VPORT_RESULT :=
 ifeq ($(ARCH),aarch64)
+CHOST := aarch64-linux-musl
 QEMU_ARCH := aarch64
 KERNEL_ARCH := arm64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -79,9 +68,11 @@  QEMU_MACHINE := -cpu cortex-a53 -machine virt
 CFLAGS += -march=armv8-a -mtune=cortex-a53
 endif
 else ifeq ($(ARCH),aarch64_be)
+CHOST := aarch64_be-linux-musl
 QEMU_ARCH := aarch64
 KERNEL_ARCH := arm64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -89,9 +80,11 @@  QEMU_MACHINE := -cpu cortex-a53 -machine virt
 CFLAGS += -march=armv8-a -mtune=cortex-a53
 endif
 else ifeq ($(ARCH),arm)
+CHOST := arm-linux-musleabi
 QEMU_ARCH := arm
 KERNEL_ARCH := arm
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -99,9 +92,11 @@  QEMU_MACHINE := -cpu cortex-a15 -machine virt
 CFLAGS += -march=armv7-a -mtune=cortex-a15 -mabi=aapcs-linux
 endif
 else ifeq ($(ARCH),armeb)
+CHOST := armeb-linux-musleabi
 QEMU_ARCH := arm
 KERNEL_ARCH := arm
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -110,6 +105,7 @@  CFLAGS += -march=armv7-a -mabi=aapcs-linux # We don't pass -mtune=cortex-a15 due
 LDFLAGS += -Wl,--be8
 endif
 else ifeq ($(ARCH),x86_64)
+CHOST := x86_64-linux-musl
 QEMU_ARCH := x86_64
 KERNEL_ARCH := x86_64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
@@ -120,6 +116,7 @@  QEMU_MACHINE := -cpu Skylake-Server -machine q35
 CFLAGS += -march=skylake-avx512
 endif
 else ifeq ($(ARCH),i686)
+CHOST := i686-linux-musl
 QEMU_ARCH := i386
 KERNEL_ARCH := x86
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
@@ -130,6 +127,7 @@  QEMU_MACHINE := -cpu coreduo -machine q35
 CFLAGS += -march=prescott
 endif
 else ifeq ($(ARCH),mips64)
+CHOST := mips64-linux-musl
 QEMU_ARCH := mips64
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -141,6 +139,7 @@  QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
 CFLAGS += -march=mips64r2 -EB
 endif
 else ifeq ($(ARCH),mips64el)
+CHOST := mips64el-linux-musl
 QEMU_ARCH := mips64el
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -152,6 +151,7 @@  QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
 CFLAGS += -march=mips64r2 -EL
 endif
 else ifeq ($(ARCH),mips)
+CHOST := mips-linux-musl
 QEMU_ARCH := mips
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -163,6 +163,7 @@  QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
 CFLAGS += -march=mips32r2 -EB
 endif
 else ifeq ($(ARCH),mipsel)
+CHOST := mipsel-linux-musl
 QEMU_ARCH := mipsel
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -173,7 +174,18 @@  else
 QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
 CFLAGS += -march=mips32r2 -EL
 endif
+else ifeq ($(ARCH),powerpc64)
+CHOST := powerpc64-linux-musl
+QEMU_ARCH := ppc64
+KERNEL_ARCH := powerpc
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
+else
+QEMU_MACHINE := -machine pseries
+endif
 else ifeq ($(ARCH),powerpc64le)
+CHOST := powerpc64le-linux-musl
 QEMU_ARCH := ppc64
 KERNEL_ARCH := powerpc
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -182,8 +194,8 @@  QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
 else
 QEMU_MACHINE := -machine pseries
 endif
-CFLAGS += -mcpu=powerpc64le -mlong-double-64
 else ifeq ($(ARCH),powerpc)
+CHOST := powerpc-linux-musl
 QEMU_ARCH := ppc
 KERNEL_ARCH := powerpc
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/powerpc/boot/uImage
@@ -192,26 +204,72 @@  QEMU_MACHINE := -cpu host,accel=kvm -machine ppce500
 else
 QEMU_MACHINE := -machine ppce500
 endif
-CFLAGS += -mcpu=powerpc -mlong-double-64 -msecure-plt
 else ifeq ($(ARCH),m68k)
+CHOST := m68k-linux-musl
 QEMU_ARCH := m68k
 KERNEL_ARCH := m68k
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
 KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/m68k.config)
 ifeq ($(HOST_ARCH),$(ARCH))
-QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
+QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -append $(KERNEL_CMDLINE)
 else
 QEMU_MACHINE := -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
 endif
+else ifeq ($(ARCH),riscv64)
+CHOST := riscv64-linux-musl
+QEMU_ARCH := riscv64
+KERNEL_ARCH := riscv
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/riscv/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine virt
+else
+QEMU_MACHINE := -cpu rv64 -machine virt
+endif
+else ifeq ($(ARCH),riscv32)
+CHOST := riscv32-linux-musl
+QEMU_ARCH := riscv32
+KERNEL_ARCH := riscv
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/riscv/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine virt
+else
+QEMU_MACHINE := -cpu rv32 -machine virt
+endif
+else ifeq ($(ARCH),s390x)
+CHOST := s390x-linux-musl
+QEMU_ARCH := s390x
+KERNEL_ARCH := s390
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/s390/boot/bzImage
+KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/s390x.config)
+QEMU_VPORT_RESULT := virtio-serial-ccw
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine s390-ccw-virtio -append $(KERNEL_CMDLINE)
 else
-$(error I only build: x86_64, i686, arm, armeb, aarch64, aarch64_be, mips, mipsel, mips64, mips64el, powerpc64le, powerpc, m68k)
+QEMU_MACHINE := -machine s390-ccw-virtio -append $(KERNEL_CMDLINE)
 endif
+else
+$(error I only build: x86_64, i686, arm, armeb, aarch64, aarch64_be, mips, mipsel, mips64, mips64el, powerpc64, powerpc64le, powerpc, m68k, riscv64, riscv32, s390x)
+endif
+
+TOOLCHAIN_FILENAME := $(CHOST)-cross.tgz
+TOOLCHAIN_TAR := $(DISTFILES_PATH)/$(TOOLCHAIN_FILENAME)
+TOOLCHAIN_PATH := $(BUILD_PATH)/$(CHOST)-cross
+TOOLCHAIN_DIR := https://download.wireguard.com/qemu-test/toolchains/20211123/
+$(eval $(call file_download,toolchain-sha256sums-20211123,$(TOOLCHAIN_DIR)SHA256SUMS#,83da033fd8c798df476c21d9612da2dfb896ec62fbed4ceec5eefc0e56b3f0c8))
+$(eval $(call file_download,$(TOOLCHAIN_FILENAME),$(TOOLCHAIN_DIR),,$(DISTFILES_PATH)/toolchain-sha256sums-20211123))
 
-REAL_CC := $(CBUILD)-gcc
-MUSL_CC := $(BUILD_PATH)/musl-gcc
-export CC := $(MUSL_CC)
-USERSPACE_DEPS := $(MUSL_CC) $(BUILD_PATH)/include/.installed $(BUILD_PATH)/include/linux/.installed
+STRIP := $(CHOST)-strip
+CROSS_COMPILE_FLAG := --build=$(CBUILD) --host=$(CHOST)
+$(info Building for $(CHOST) using $(CBUILD))
+export CROSS_COMPILE := $(CHOST)-
+export PATH := $(TOOLCHAIN_PATH)/bin:$(PATH)
+export CC := $(CHOST)-gcc
+
+USERSPACE_DEPS := $(TOOLCHAIN_PATH)/.installed $(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed
 
+comma := ,
 build: $(KERNEL_BZIMAGE)
 qemu: $(KERNEL_BZIMAGE)
 	rm -f $(BUILD_PATH)/result
@@ -222,13 +280,14 @@  qemu: $(KERNEL_BZIMAGE)
 		$(QEMU_MACHINE) \
 		-m $$(grep -q CONFIG_DEBUG_KMEMLEAK=y $(KERNEL_BUILD_PATH)/.config && echo 1G || echo 256M) \
 		-serial stdio \
-		-serial file:$(BUILD_PATH)/result \
+		-chardev file,path=$(BUILD_PATH)/result,id=result \
+		$(if $(QEMU_VPORT_RESULT),-device $(QEMU_VPORT_RESULT) -device virtserialport$(comma)chardev=result,-serial chardev:result) \
 		-no-reboot \
 		-monitor none \
 		-kernel $<
 	grep -Fq success $(BUILD_PATH)/result
 
-$(BUILD_PATH)/init-cpio-spec.txt:
+$(BUILD_PATH)/init-cpio-spec.txt: $(TOOLCHAIN_PATH)/.installed $(BUILD_PATH)/init
 	mkdir -p $(BUILD_PATH)
 	echo "file /init $(BUILD_PATH)/init 755 0 0" > $@
 	echo "file /init.sh $(PWD)/../netns.sh 755 0 0" >> $@
@@ -246,10 +305,10 @@  $(BUILD_PATH)/init-cpio-spec.txt:
 	echo "slink /bin/iptables xtables-legacy-multi 777 0 0" >> $@
 	echo "slink /bin/ping6 ping 777 0 0" >> $@
 	echo "dir /lib 755 0 0" >> $@
-	echo "file /lib/libc.so $(MUSL_PATH)/lib/libc.so 755 0 0" >> $@
-	echo "slink /lib/ld-linux.so.1 libc.so 777 0 0" >> $@
+	echo "file /lib/libc.so $(TOOLCHAIN_PATH)/$(CHOST)/lib/libc.so 755 0 0" >> $@
+	echo "slink $$($(CHOST)-readelf -p .interp '$(BUILD_PATH)/init'| grep -o '/lib/.*') libc.so 777 0 0" >> $@
 
-$(KERNEL_BUILD_PATH)/.config: kernel.config arch/$(ARCH).config
+$(KERNEL_BUILD_PATH)/.config: $(TOOLCHAIN_PATH)/.installed kernel.config arch/$(ARCH).config
 	mkdir -p $(KERNEL_BUILD_PATH)
 	cp kernel.config $(KERNEL_BUILD_PATH)/minimal.config
 	printf 'CONFIG_NR_CPUS=$(NR_CPUS)\nCONFIG_INITRAMFS_SOURCE="$(BUILD_PATH)/init-cpio-spec.txt"\n' >> $(KERNEL_BUILD_PATH)/minimal.config
@@ -258,29 +317,20 @@  $(KERNEL_BUILD_PATH)/.config: kernel.config arch/$(ARCH).config
 	cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config
 	$(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,)
 
-$(KERNEL_BZIMAGE): $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(MUSL_PATH)/lib/libc.so $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
+$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
 	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE)
 
-$(BUILD_PATH)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config
-	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) INSTALL_HDR_PATH=$(BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) headers_install
+$(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config $(TOOLCHAIN_PATH)/.installed
+	rm -rf $(TOOLCHAIN_PATH)/$(CHOST)/include/linux
+	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) INSTALL_HDR_PATH=$(TOOLCHAIN_PATH)/$(CHOST) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) headers_install
 	touch $@
 
-$(MUSL_PATH)/lib/libc.so: $(MUSL_TAR)
+$(TOOLCHAIN_PATH)/.installed: $(TOOLCHAIN_TAR)
 	mkdir -p $(BUILD_PATH)
 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-	cd $(MUSL_PATH) && CC=$(REAL_CC) ./configure --prefix=/ --disable-static --build=$(CBUILD)
-	$(MAKE) -C $(MUSL_PATH)
-	$(STRIP) -s $@
-
-$(BUILD_PATH)/include/.installed: $(MUSL_PATH)/lib/libc.so
-	$(MAKE) -C $(MUSL_PATH) DESTDIR=$(BUILD_PATH) install-headers
+	$(STRIP) -s $(TOOLCHAIN_PATH)/$(CHOST)/lib/libc.so
 	touch $@
 
-$(MUSL_CC): $(MUSL_PATH)/lib/libc.so
-	sh $(MUSL_PATH)/tools/musl-gcc.specs.sh $(BUILD_PATH)/include $(MUSL_PATH)/lib /lib/ld-linux.so.1 > $(BUILD_PATH)/musl-gcc.specs
-	printf '#!/bin/sh\nexec "$(REAL_CC)" --specs="$(BUILD_PATH)/musl-gcc.specs" "$$@"\n' > $(BUILD_PATH)/musl-gcc
-	chmod +x $(BUILD_PATH)/musl-gcc
-
 $(IPERF_PATH)/.installed: $(IPERF_TAR)
 	mkdir -p $(BUILD_PATH)
 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
@@ -289,6 +339,7 @@  $(IPERF_PATH)/.installed: $(IPERF_TAR)
 	touch $@
 
 $(IPERF_PATH)/src/iperf3: | $(IPERF_PATH)/.installed $(USERSPACE_DEPS)
+	cd $(IPERF_PATH) && autoreconf -fi
 	cd $(IPERF_PATH) && CFLAGS="$(CFLAGS) -D_GNU_SOURCE" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --with-openssl=no
 	$(MAKE) -C $(IPERF_PATH)
 	$(STRIP) -s $@
@@ -304,7 +355,7 @@  $(WIREGUARD_TOOLS_PATH)/src/wg: | $(WIREGUARD_TOOLS_PATH)/.installed $(USERSPACE
 
 $(BUILD_PATH)/init: init.c | $(USERSPACE_DEPS)
 	mkdir -p $(BUILD_PATH)
-	$(MUSL_CC) -o $@ $(CFLAGS) $(LDFLAGS) -std=gnu11 $<
+	$(CC) -o $@ $(CFLAGS) $(LDFLAGS) -std=gnu11 $<
 	$(STRIP) -s $@
 
 $(IPUTILS_PATH)/.installed: $(IPUTILS_TAR)
diff --git a/tools/testing/selftests/wireguard/qemu/arch/aarch64.config b/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
index 3d063bb247bb..e9ac41f6b3ae 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
@@ -1,5 +1,8 @@ 
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config b/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
index dbdc7e406a7b..03609a203e8c 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
@@ -1,6 +1,9 @@ 
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/arm.config b/tools/testing/selftests/wireguard/qemu/arch/arm.config
index 148f49905418..c616124fdd59 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/arm.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/arm.config
@@ -4,6 +4,9 @@  CONFIG_ARCH_VIRT=y
 CONFIG_THUMB2_KERNEL=n
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/armeb.config b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
index bd76b07d00a2..d3a40a974e16 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/armeb.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
@@ -4,7 +4,10 @@  CONFIG_ARCH_VIRT=y
 CONFIG_THUMB2_KERNEL=n
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
new file mode 100644
index 000000000000..c19c7b519d8b
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
@@ -0,0 +1,13 @@ 
+CONFIG_PPC64=y
+CONFIG_PPC_PSERIES=y
+CONFIG_ALTIVEC=y
+CONFIG_VSX=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_PPC_RADIX_MMU=y
+CONFIG_HVC_CONSOLE=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=hvc0 wg.success=hvc1"
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+CONFIG_FRAME_WARN=1280
+CONFIG_THREAD_SHIFT=14
diff --git a/tools/testing/selftests/wireguard/qemu/arch/riscv32.config b/tools/testing/selftests/wireguard/qemu/arch/riscv32.config
new file mode 100644
index 000000000000..ea53e78e923e
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/riscv32.config
@@ -0,0 +1,12 @@ 
+CONFIG_ARCH_RV32I=y
+CONFIG_MMU=y
+CONFIG_FPU=y
+CONFIG_SOC_VIRT=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1"
+CONFIG_CMDLINE_FORCE=y
diff --git a/tools/testing/selftests/wireguard/qemu/arch/riscv64.config b/tools/testing/selftests/wireguard/qemu/arch/riscv64.config
new file mode 100644
index 000000000000..4a08d8c1d4af
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/riscv64.config
@@ -0,0 +1,12 @@ 
+CONFIG_ARCH_RV64I=y
+CONFIG_MMU=y
+CONFIG_FPU=y
+CONFIG_SOC_VIRT=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1"
+CONFIG_CMDLINE_FORCE=y
diff --git a/tools/testing/selftests/wireguard/qemu/arch/s390x.config b/tools/testing/selftests/wireguard/qemu/arch/s390x.config
new file mode 100644
index 000000000000..274a44f4e49c
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/s390x.config
@@ -0,0 +1,6 @@ 
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_S390_GUEST=y
+CONFIG_CMDLINE="console=ttysclp0 wg.success=vport0p1"