@@ -1036,13 +1036,13 @@ static void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
int first, index, cnt;
struct ksz_port *p;
- if ((uint)port < dev->port_cnt) {
+ if ((uint)port < dev->info->port_cnt) {
first = port;
cnt = port + 1;
} else {
/* Flush all ports. */
first = 0;
- cnt = dev->port_cnt;
+ cnt = dev->info->port_cnt;
}
for (index = first; index < cnt; index++) {
p = &dev->ports[index];
@@ -1118,7 +1118,7 @@ static int ksz8_port_vlan_add(struct dsa_switch *ds, int port,
* Remove Tag flag to be changed, unless there are no
* other VLANs currently configured.
*/
- for (vid = 1; vid < dev->num_vlans; ++vid) {
+ for (vid = 1; vid < dev->info->num_vlans; ++vid) {
/* Skip the VID we are going to add or reconfigure */
if (vid == vlan->vid)
continue;
@@ -1389,7 +1389,7 @@ static int ksz8_handle_global_errata(struct dsa_switch *ds)
* KSZ879x/KSZ877x/KSZ876x and some EEE link partners may result in
* the link dropping.
*/
- if (dev->ksz87xx_eee_link_erratum)
+ if (dev->info->ksz87xx_eee_link_erratum)
ret = ksz8_ind_write8(dev, TABLE_EEE, REG_IND_EEE_GLOB2_HI, 0);
return ret;
@@ -1402,7 +1402,7 @@ static int ksz8_setup(struct dsa_switch *ds)
int i, ret = 0;
dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
- dev->num_vlans, GFP_KERNEL);
+ dev->info->num_vlans, GFP_KERNEL);
if (!dev->vlan_cache)
return -ENOMEM;
@@ -1446,7 +1446,7 @@ static int ksz8_setup(struct dsa_switch *ds)
(BROADCAST_STORM_VALUE *
BROADCAST_STORM_PROT_RATE) / 100);
- for (i = 0; i < (dev->num_vlans / 4); i++)
+ for (i = 0; i < (dev->info->num_vlans / 4); i++)
ksz8_r_vlan_entries(dev, i);
/* Setup STP address for STP operation. */
@@ -1571,74 +1571,6 @@ static int ksz8_switch_detect(struct ksz_device *dev)
return 0;
}
-struct ksz_chip_data {
- u16 chip_id;
- const char *dev_name;
- int num_vlans;
- int num_alus;
- int num_statics;
- int cpu_ports;
- int port_cnt;
- bool ksz87xx_eee_link_erratum;
-};
-
-static const struct ksz_chip_data ksz8_switch_chips[] = {
- {
- .chip_id = 0x8795,
- .dev_name = "KSZ8795",
- .num_vlans = 4096,
- .num_alus = 0,
- .num_statics = 8,
- .cpu_ports = 0x10, /* can be configured as cpu port */
- .port_cnt = 5, /* total cpu and user ports */
- .ksz87xx_eee_link_erratum = true,
- },
- {
- /*
- * WARNING
- * =======
- * KSZ8794 is similar to KSZ8795, except the port map
- * contains a gap between external and CPU ports, the
- * port map is NOT continuous. The per-port register
- * map is shifted accordingly too, i.e. registers at
- * offset 0x40 are NOT used on KSZ8794 and they ARE
- * used on KSZ8795 for external port 3.
- * external cpu
- * KSZ8794 0,1,2 4
- * KSZ8795 0,1,2,3 4
- * KSZ8765 0,1,2,3 4
- * port_cnt is configured as 5, even though it is 4
- */
- .chip_id = 0x8794,
- .dev_name = "KSZ8794",
- .num_vlans = 4096,
- .num_alus = 0,
- .num_statics = 8,
- .cpu_ports = 0x10, /* can be configured as cpu port */
- .port_cnt = 5, /* total cpu and user ports */
- .ksz87xx_eee_link_erratum = true,
- },
- {
- .chip_id = 0x8765,
- .dev_name = "KSZ8765",
- .num_vlans = 4096,
- .num_alus = 0,
- .num_statics = 8,
- .cpu_ports = 0x10, /* can be configured as cpu port */
- .port_cnt = 5, /* total cpu and user ports */
- .ksz87xx_eee_link_erratum = true,
- },
- {
- .chip_id = 0x8830,
- .dev_name = "KSZ8863/KSZ8873",
- .num_vlans = 16,
- .num_alus = 0,
- .num_statics = 8,
- .cpu_ports = 0x4, /* can be configured as cpu port */
- .port_cnt = 3,
- },
-};
-
static int ksz8_switch_init(struct ksz_device *dev)
{
struct ksz8 *ksz8 = dev->priv;
@@ -1646,30 +1578,10 @@ static int ksz8_switch_init(struct ksz_device *dev)
dev->ds->ops = &ksz8_switch_ops;
- for (i = 0; i < ARRAY_SIZE(ksz8_switch_chips); i++) {
- const struct ksz_chip_data *chip = &ksz8_switch_chips[i];
-
- if (dev->chip_id == chip->chip_id) {
- dev->name = chip->dev_name;
- dev->num_vlans = chip->num_vlans;
- dev->num_alus = chip->num_alus;
- dev->num_statics = chip->num_statics;
- dev->port_cnt = chip->port_cnt;
- dev->cpu_port = fls(chip->cpu_ports) - 1;
- dev->phy_port_cnt = dev->port_cnt - 1;
- dev->cpu_ports = chip->cpu_ports;
- dev->host_mask = chip->cpu_ports;
- dev->port_mask = (BIT(dev->phy_port_cnt) - 1) |
- chip->cpu_ports;
- dev->ksz87xx_eee_link_erratum =
- chip->ksz87xx_eee_link_erratum;
- break;
- }
- }
-
- /* no switch found */
- if (!dev->cpu_ports)
- return -ENODEV;
+ dev->cpu_port = fls(dev->info->cpu_ports) - 1;
+ dev->host_mask = dev->info->cpu_ports;
+ dev->phy_port_cnt = dev->info->port_cnt - 1;
+ dev->port_mask = (BIT(dev->phy_port_cnt) - 1) | dev->info->cpu_ports;
if (ksz_is_ksz88x3(dev)) {
ksz8->regs = ksz8863_regs;
@@ -1688,11 +1600,11 @@ static int ksz8_switch_init(struct ksz_device *dev)
dev->reg_mib_cnt = MIB_COUNTER_NUM;
dev->ports = devm_kzalloc(dev->dev,
- dev->port_cnt * sizeof(struct ksz_port),
+ dev->info->port_cnt * sizeof(struct ksz_port),
GFP_KERNEL);
if (!dev->ports)
return -ENOMEM;
- for (i = 0; i < dev->port_cnt; i++) {
+ for (i = 0; i < dev->info->port_cnt; i++) {
mutex_init(&dev->ports[i].mib.cnt_mutex);
dev->ports[i].mib.counters =
devm_kzalloc(dev->dev,
@@ -1704,7 +1616,7 @@ static int ksz8_switch_init(struct ksz_device *dev)
}
/* set the real number of ports */
- dev->ds->num_ports = dev->port_cnt;
+ dev->ds->num_ports = dev->info->port_cnt;
/* We rely on software untagging on the CPU port, so that we
* can support both tagged and untagged VLANs
@@ -100,7 +100,7 @@ static int ksz9477_change_mtu(struct dsa_switch *ds, int port, int mtu)
/* Cache the per-port MTU setting */
dev->ports[port].max_frame = frame_size;
- for (i = 0; i < dev->port_cnt; i++)
+ for (i = 0; i < dev->info->port_cnt; i++)
max_frame = max(max_frame, dev->ports[i].max_frame);
return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
@@ -434,7 +434,7 @@ static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S,
SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
- if (port < dev->port_cnt) {
+ if (port < dev->info->port_cnt) {
/* flush individual port */
ksz_pread8(dev, port, P_STP_CTRL, &data);
if (!(data & PORT_LEARN_DISABLE))
@@ -756,7 +756,7 @@ static int ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
mutex_lock(&dev->alu_mutex);
- for (index = 0; index < dev->num_statics; index++) {
+ for (index = 0; index < dev->info->num_statics; index++) {
/* find empty slot first */
data = (index << ALU_STAT_INDEX_S) |
ALU_STAT_READ | ALU_STAT_START;
@@ -787,7 +787,7 @@ static int ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
}
/* no available entry */
- if (index == dev->num_statics) {
+ if (index == dev->info->num_statics) {
err = -ENOSPC;
goto exit;
}
@@ -832,7 +832,7 @@ static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
mutex_lock(&dev->alu_mutex);
- for (index = 0; index < dev->num_statics; index++) {
+ for (index = 0; index < dev->info->num_statics; index++) {
/* find empty slot first */
data = (index << ALU_STAT_INDEX_S) |
ALU_STAT_READ | ALU_STAT_START;
@@ -861,7 +861,7 @@ static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
}
/* no available entry */
- if (index == dev->num_statics)
+ if (index == dev->info->num_statics)
goto exit;
/* clear port */
@@ -903,7 +903,7 @@ static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
* Check if any of the port is already set for sniffing
* If yes, instruct the user to remove the previous entry & exit
*/
- for (p = 0; p < dev->port_cnt; p++) {
+ for (p = 0; p < dev->info->port_cnt; p++) {
/* Skip the current sniffing port */
if (p == mirror->to_local_port)
continue;
@@ -946,7 +946,7 @@ static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
/* Check if any of the port is still referring to sniffer port */
- for (p = 0; p < dev->port_cnt; p++) {
+ for (p = 0; p < dev->info->port_cnt; p++) {
ksz_pread8(dev, p, P_MIRROR_CTRL, &data);
if ((data & (PORT_MIRROR_RX | PORT_MIRROR_TX))) {
@@ -1194,7 +1194,7 @@ static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
false);
- if (dev->phy_errata_9477)
+ if (dev->info->phy_errata_9477)
ksz9477_phy_errata_setup(dev, port);
} else {
/* force flow control */
@@ -1259,8 +1259,9 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds)
struct ksz_port *p;
int i;
- for (i = 0; i < dev->port_cnt; i++) {
- if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
+ for (i = 0; i < dev->info->port_cnt; i++) {
+ if (dsa_is_cpu_port(ds, i) &&
+ (dev->info->cpu_ports & (1 << i))) {
phy_interface_t interface;
const char *prev_msg;
const char *prev_mode;
@@ -1304,7 +1305,7 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds)
}
}
- for (i = 0; i < dev->port_cnt; i++) {
+ for (i = 0; i < dev->info->port_cnt; i++) {
if (i == dev->cpu_port)
continue;
p = &dev->ports[i];
@@ -1328,7 +1329,7 @@ static int ksz9477_setup(struct dsa_switch *ds)
int ret = 0;
dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
- dev->num_vlans, GFP_KERNEL);
+ dev->info->num_vlans, GFP_KERNEL);
if (!dev->vlan_cache)
return -ENOMEM;
@@ -1470,96 +1471,23 @@ static int ksz9477_switch_detect(struct ksz_device *dev)
return 0;
}
-struct ksz_chip_data {
- u32 chip_id;
- const char *dev_name;
- int num_vlans;
- int num_alus;
- int num_statics;
- int cpu_ports;
- int port_cnt;
- bool phy_errata_9477;
-};
-
-static const struct ksz_chip_data ksz9477_switch_chips[] = {
- {
- .chip_id = 0x00947700,
- .dev_name = "KSZ9477",
- .num_vlans = 4096,
- .num_alus = 4096,
- .num_statics = 16,
- .cpu_ports = 0x7F, /* can be configured as cpu port */
- .port_cnt = 7, /* total physical port count */
- .phy_errata_9477 = true,
- },
- {
- .chip_id = 0x00989700,
- .dev_name = "KSZ9897",
- .num_vlans = 4096,
- .num_alus = 4096,
- .num_statics = 16,
- .cpu_ports = 0x7F, /* can be configured as cpu port */
- .port_cnt = 7, /* total physical port count */
- .phy_errata_9477 = true,
- },
- {
- .chip_id = 0x00989300,
- .dev_name = "KSZ9893",
- .num_vlans = 4096,
- .num_alus = 4096,
- .num_statics = 16,
- .cpu_ports = 0x07, /* can be configured as cpu port */
- .port_cnt = 3, /* total port count */
- },
- {
- .chip_id = 0x00956700,
- .dev_name = "KSZ9567",
- .num_vlans = 4096,
- .num_alus = 4096,
- .num_statics = 16,
- .cpu_ports = 0x7F, /* can be configured as cpu port */
- .port_cnt = 7, /* total physical port count */
- .phy_errata_9477 = true,
- },
-};
-
static int ksz9477_switch_init(struct ksz_device *dev)
{
int i;
dev->ds->ops = &ksz9477_switch_ops;
- for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
- const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
-
- if (dev->chip_id == chip->chip_id) {
- dev->name = chip->dev_name;
- dev->num_vlans = chip->num_vlans;
- dev->num_alus = chip->num_alus;
- dev->num_statics = chip->num_statics;
- dev->port_cnt = chip->port_cnt;
- dev->cpu_ports = chip->cpu_ports;
- dev->phy_errata_9477 = chip->phy_errata_9477;
-
- break;
- }
- }
-
- /* no switch found */
- if (!dev->port_cnt)
- return -ENODEV;
-
- dev->port_mask = (1 << dev->port_cnt) - 1;
+ dev->port_mask = (1 << dev->info->port_cnt) - 1;
dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
dev->ports = devm_kzalloc(dev->dev,
- dev->port_cnt * sizeof(struct ksz_port),
+ dev->info->port_cnt * sizeof(struct ksz_port),
GFP_KERNEL);
if (!dev->ports)
return -ENOMEM;
- for (i = 0; i < dev->port_cnt; i++) {
+ for (i = 0; i < dev->info->port_cnt; i++) {
spin_lock_init(&dev->ports[i].mib.stats64_lock);
mutex_init(&dev->ports[i].mib.cnt_mutex);
dev->ports[i].mib.counters =
@@ -1572,7 +1500,7 @@ static int ksz9477_switch_init(struct ksz_device *dev)
}
/* set the real number of ports */
- dev->ds->num_ports = dev->port_cnt;
+ dev->ds->num_ports = dev->info->port_cnt;
return 0;
}
@@ -59,6 +59,172 @@ struct ksz_stats_raw {
u64 tx_discards;
};
+const struct ksz_chip_data ksz_switch_chips[] = {
+ [KSZ8795] = {
+ .chip_id = 0x8795,
+ .dev_name = "KSZ8795",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 5, /* total cpu and user ports */
+ .ksz87xx_eee_link_erratum = true,
+ },
+
+ [KSZ8794] = {
+ /* WARNING
+ * =======
+ * KSZ8794 is similar to KSZ8795, except the port map
+ * contains a gap between external and CPU ports, the
+ * port map is NOT continuous. The per-port register
+ * map is shifted accordingly too, i.e. registers at
+ * offset 0x40 are NOT used on KSZ8794 and they ARE
+ * used on KSZ8795 for external port 3.
+ * external cpu
+ * KSZ8794 0,1,2 4
+ * KSZ8795 0,1,2,3 4
+ * KSZ8765 0,1,2,3 4
+ * port_cnt is configured as 5, even though it is 4
+ */
+ .chip_id = 0x8794,
+ .dev_name = "KSZ8794",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 5, /* total cpu and user ports */
+ .ksz87xx_eee_link_erratum = true,
+ },
+
+ [KSZ8765] = {
+ .chip_id = 0x8765,
+ .dev_name = "KSZ8765",
+ .num_vlans = 4096,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 5, /* total cpu and user ports */
+ .ksz87xx_eee_link_erratum = true,
+ },
+
+ [KSZ8830] = {
+ .chip_id = 0x8830,
+ .dev_name = "KSZ8863/KSZ8873",
+ .num_vlans = 16,
+ .num_alus = 0,
+ .num_statics = 8,
+ .cpu_ports = 0x4, /* can be configured as cpu port */
+ .port_cnt = 3,
+ },
+
+ [KSZ9477] = {
+ .chip_id = 0x00947700,
+ .dev_name = "KSZ9477",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x7F, /* can be configured as cpu port */
+ .port_cnt = 7, /* total physical port count */
+ .phy_errata_9477 = true,
+ },
+
+ [KSZ9897] = {
+ .chip_id = 0x00989700,
+ .dev_name = "KSZ9897",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x7F, /* can be configured as cpu port */
+ .port_cnt = 7, /* total physical port count */
+ .phy_errata_9477 = true,
+ },
+
+ [KSZ9893] = {
+ .chip_id = 0x00989300,
+ .dev_name = "KSZ9893",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x07, /* can be configured as cpu port */
+ .port_cnt = 3, /* total port count */
+ },
+
+ [KSZ9567] = {
+ .chip_id = 0x00956700,
+ .dev_name = "KSZ9567",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x7F, /* can be configured as cpu port */
+ .port_cnt = 7, /* total physical port count */
+ .phy_errata_9477 = true,
+ },
+
+ [LAN9370] = {
+ .chip_id = 0x00937010,
+ .dev_name = "LAN9370",
+ .num_vlans = 4096,
+ .num_alus = 1024,
+ .num_statics = 256,
+ .cpu_ports = 0x10, /* can be configured as cpu port */
+ .port_cnt = 5, /* total physical port count */
+ },
+
+ [LAN9371] = {
+ .chip_id = 0x00937110,
+ .dev_name = "LAN9371",
+ .num_vlans = 4096,
+ .num_alus = 1024,
+ .num_statics = 256,
+ .cpu_ports = 0x30, /* can be configured as cpu port */
+ .port_cnt = 6, /* total physical port count */
+ },
+
+ [LAN9372] = {
+ .chip_id = 0x00937210,
+ .dev_name = "LAN9372",
+ .num_vlans = 4096,
+ .num_alus = 1024,
+ .num_statics = 256,
+ .cpu_ports = 0x30, /* can be configured as cpu port */
+ .port_cnt = 8, /* total physical port count */
+ },
+
+ [LAN9373] = {
+ .chip_id = 0x00937310,
+ .dev_name = "LAN9373",
+ .num_vlans = 4096,
+ .num_alus = 1024,
+ .num_statics = 256,
+ .cpu_ports = 0x38, /* can be configured as cpu port */
+ .port_cnt = 5, /* total physical port count */
+ },
+
+ [LAN9374] = {
+ .chip_id = 0x00937410,
+ .dev_name = "LAN9374",
+ .num_vlans = 4096,
+ .num_alus = 1024,
+ .num_statics = 256,
+ .cpu_ports = 0x30, /* can be configured as cpu port */
+ .port_cnt = 8, /* total physical port count */
+ },
+};
+
+static const struct ksz_chip_data *ksz_lookup_info(unsigned int prod_num)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
+ const struct ksz_chip_data *chip = &ksz_switch_chips[i];
+
+ if (chip->chip_id == prod_num)
+ return chip;
+ }
+
+ return NULL;
+}
+
void ksz_r_mib_stats64(struct ksz_device *dev, int port)
{
struct rtnl_link_stats64 *stats;
@@ -207,7 +373,7 @@ static void ksz_mib_read_work(struct work_struct *work)
struct ksz_port *p;
int i;
- for (i = 0; i < dev->port_cnt; i++) {
+ for (i = 0; i < dev->info->port_cnt; i++) {
if (dsa_is_unused_port(dev->ds, i))
continue;
@@ -242,7 +408,7 @@ void ksz_init_mib_timer(struct ksz_device *dev)
INIT_DELAYED_WORK(&dev->mib_read, ksz_mib_read_work);
- for (i = 0; i < dev->port_cnt; i++)
+ for (i = 0; i < dev->info->port_cnt; i++)
dev->dev_ops->port_init_cnt(dev, i);
}
EXPORT_SYMBOL_GPL(ksz_init_mib_timer);
@@ -382,7 +548,7 @@ int ksz_port_mdb_add(struct dsa_switch *ds, int port,
int empty = 0;
alu.port_forward = 0;
- for (index = 0; index < dev->num_statics; index++) {
+ for (index = 0; index < dev->info->num_statics; index++) {
if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) {
/* Found one already in static MAC table. */
if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) &&
@@ -395,11 +561,11 @@ int ksz_port_mdb_add(struct dsa_switch *ds, int port,
}
/* no available entry */
- if (index == dev->num_statics && !empty)
+ if (index == dev->info->num_statics && !empty)
return -ENOSPC;
/* add entry */
- if (index == dev->num_statics) {
+ if (index == dev->info->num_statics) {
index = empty - 1;
memset(&alu, 0, sizeof(alu));
memcpy(alu.mac, mdb->addr, ETH_ALEN);
@@ -426,7 +592,7 @@ int ksz_port_mdb_del(struct dsa_switch *ds, int port,
struct alu_struct alu;
int index;
- for (index = 0; index < dev->num_statics; index++) {
+ for (index = 0; index < dev->info->num_statics; index++) {
if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) {
/* Found one already in static MAC table. */
if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) &&
@@ -436,7 +602,7 @@ int ksz_port_mdb_del(struct dsa_switch *ds, int port,
}
/* no available entry */
- if (index == dev->num_statics)
+ if (index == dev->info->num_statics)
goto exit;
/* clear port */
@@ -537,6 +703,7 @@ EXPORT_SYMBOL(ksz_switch_alloc);
int ksz_switch_register(struct ksz_device *dev,
const struct ksz_dev_ops *ops)
{
+ const struct ksz_chip_data *info;
struct device_node *port, *ports;
phy_interface_t interface;
unsigned int port_num;
@@ -567,6 +734,13 @@ int ksz_switch_register(struct ksz_device *dev,
if (dev->dev_ops->detect(dev))
return -EINVAL;
+ info = ksz_lookup_info(dev->chip_id);
+ if (!info)
+ return -ENODEV;
+
+ /* Update the compatible info with the probed one */
+ dev->info = info;
+
ret = dev->dev_ops->init(dev);
if (ret)
return ret;
@@ -574,7 +748,7 @@ int ksz_switch_register(struct ksz_device *dev,
/* Host port interface will be self detected, or specifically set in
* device tree.
*/
- for (port_num = 0; port_num < dev->port_cnt; ++port_num)
+ for (port_num = 0; port_num < dev->info->port_cnt; ++port_num)
dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
if (dev->dev->of_node) {
ret = of_get_phy_mode(dev->dev->of_node, &interface);
@@ -26,6 +26,18 @@ struct ksz_port_mib {
struct spinlock stats64_lock;
};
+struct ksz_chip_data {
+ u32 chip_id;
+ const char *dev_name;
+ int num_vlans;
+ int num_alus;
+ int num_statics;
+ int cpu_ports;
+ int port_cnt;
+ bool phy_errata_9477;
+ bool ksz87xx_eee_link_erratum;
+};
+
struct ksz_port {
bool remove_tag; /* Remove Tag flag set, for ksz8795 only */
int stp_state;
@@ -48,6 +60,7 @@ struct ksz_device {
struct dsa_switch *ds;
struct ksz_platform_data *pdata;
const char *name;
+ const struct ksz_chip_data *info;
struct mutex dev_mutex; /* device access */
struct mutex regmap_mutex; /* regmap access */
@@ -64,20 +77,13 @@ struct ksz_device {
/* chip specific data */
u32 chip_id;
- int num_vlans;
- int num_alus;
- int num_statics;
int cpu_port; /* port connected to CPU */
- int cpu_ports; /* port bitmap can be cpu port */
int phy_port_cnt;
- int port_cnt;
u8 reg_mib_cnt;
int mib_cnt;
const struct mib_names *mib_names;
phy_interface_t compat_interface;
u32 regs_size;
- bool phy_errata_9477;
- bool ksz87xx_eee_link_erratum;
bool synclko_125;
bool synclko_disable;
@@ -94,6 +100,23 @@ struct ksz_device {
u16 port_mask;
};
+/* List of supported models */
+enum ksz_model {
+ KSZ8795,
+ KSZ8794,
+ KSZ8765,
+ KSZ8830,
+ KSZ9477,
+ KSZ9897,
+ KSZ9893,
+ KSZ9567,
+ LAN9370,
+ LAN9371,
+ LAN9372,
+ LAN9373,
+ LAN9374,
+};
+
struct alu_struct {
/* entry 1 */
u8 is_static:1;
This patch moves the ksz_chip_data in ksz8795 and ksz9477 to ksz_common. At present, the dev->chip_id is iterated with the ksz_chip_data and then copy its value to the ksz_dev structure. These values are declared as constant. Instead of copying the values and referencing it, this patch update the dev->info to the ksz_chip_data based on the chip_id in the init function. And also update the ksz_chip_data values for the LAN937x based switches. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> --- drivers/net/dsa/microchip/ksz8795.c | 114 ++------------- drivers/net/dsa/microchip/ksz9477.c | 108 +++----------- drivers/net/dsa/microchip/ksz_common.c | 190 +++++++++++++++++++++++-- drivers/net/dsa/microchip/ksz_common.h | 37 ++++- 4 files changed, 243 insertions(+), 206 deletions(-)