[net-next,2/6] net: dsa: felix: move the updating of PGID_CPU to the ocelot lib

Commit Message

Vladimir Oltean May 21, 2022, 9:37 p.m. UTC

PGID_CPU must be updated every time a port is configured or unconfigured
as a tag_8021q CPU port. The ocelot switch lib already has a hook for
that operation, so move the updating of PGID_CPU to those hooks.

These bits are pretty specific to DSA, so normally I would keep them out
of the common switch lib, but when tag_8021q is in use, this has
implications upon the forwarding mask determined by
ocelot_apply_bridge_fwd_mask() and called extensively by the switch lib.

Signed-off-by: Vladimir Oltean <[e-mail]>
---
 drivers/net/dsa/ocelot/felix.c     |  7 -------
 drivers/net/ethernet/mscc/ocelot.c | 31 ++++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+), 7 deletions(-)

Patch

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 78c32b7de185..1299f6a8ac5b 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -253,9 +253,6 @@  static void felix_8021q_cpu_port_init(struct ocelot *ocelot, int port)
 
 	ocelot_port_set_dsa_8021q_cpu(ocelot, port);
 
-	/* Overwrite PGID_CPU with the non-tagging port */
-	ocelot_write_rix(ocelot, BIT(port), ANA_PGID_PGID, PGID_CPU);
-
 	ocelot_apply_bridge_fwd_mask(ocelot, true);
 
 	mutex_unlock(&ocelot->fwd_domain_lock);
@@ -267,10 +264,6 @@  static void felix_8021q_cpu_port_deinit(struct ocelot *ocelot, int port)
 
 	ocelot_port_unset_dsa_8021q_cpu(ocelot, port);
 
-	/* Restore PGID_CPU */
-	ocelot_write_rix(ocelot, BIT(ocelot->num_phys_ports), ANA_PGID_PGID,
-			 PGID_CPU);
-
 	ocelot_apply_bridge_fwd_mask(ocelot, true);
 
 	mutex_unlock(&ocelot->fwd_domain_lock);
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index e0d1d5b59981..ac9faf1923c5 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -2165,6 +2165,33 @@  void ocelot_apply_bridge_fwd_mask(struct ocelot *ocelot, bool joining)
 }
 EXPORT_SYMBOL(ocelot_apply_bridge_fwd_mask);
 
+/* Update PGID_CPU which is the destination port mask used for whitelisting
+ * unicast addresses filtered towards the host. In the normal and NPI modes,
+ * this points to the analyzer entry for the CPU port module, while in DSA
+ * tag_8021q mode, it is a bit mask of all active CPU ports.
+ * PGID_SRC will take care of forwarding a packet from one user port to
+ * no more than a single CPU port.
+ */
+static void ocelot_update_pgid_cpu(struct ocelot *ocelot)
+{
+	int pgid_cpu = 0;
+	int port;
+
+	for (port = 0; port < ocelot->num_phys_ports; port++) {
+		struct ocelot_port *ocelot_port = ocelot->ports[port];
+
+		if (!ocelot_port || !ocelot_port->is_dsa_8021q_cpu)
+			continue;
+
+		pgid_cpu |= BIT(port);
+	}
+
+	if (!pgid_cpu)
+		pgid_cpu = BIT(ocelot->num_phys_ports);
+
+	ocelot_write_rix(ocelot, pgid_cpu, ANA_PGID_PGID, PGID_CPU);
+}
+
 void ocelot_port_set_dsa_8021q_cpu(struct ocelot *ocelot, int port)
 {
 	u16 vid;
@@ -2173,6 +2200,8 @@  void ocelot_port_set_dsa_8021q_cpu(struct ocelot *ocelot, int port)
 
 	for (vid = OCELOT_RSV_VLAN_RANGE_START; vid < VLAN_N_VID; vid++)
 		ocelot_vlan_member_add(ocelot, port, vid, true);
+
+	ocelot_update_pgid_cpu(ocelot);
 }
 EXPORT_SYMBOL_GPL(ocelot_port_set_dsa_8021q_cpu);
 
@@ -2184,6 +2213,8 @@  void ocelot_port_unset_dsa_8021q_cpu(struct ocelot *ocelot, int port)
 
 	for (vid = OCELOT_RSV_VLAN_RANGE_START; vid < VLAN_N_VID; vid++)
 		ocelot_vlan_member_del(ocelot, port, vid);
+
+	ocelot_update_pgid_cpu(ocelot);
 }
 EXPORT_SYMBOL_GPL(ocelot_port_unset_dsa_8021q_cpu);