diff mbox series

[net-next,4/6] net: dsa: felix: directly call ocelot_port_{set,unset}_dsa_8021q_cpu

Message ID 20220521213743.2735445-5-vladimir.oltean@nxp.com (mailing list archive)
State Accepted
Commit 8c166acb60f8284470db673b6dccd43e6fedfae2
Delegated to: Netdev Maintainers
Headers show
Series DSA changes for multiple CPU ports (part 2) | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 12 of 12 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 92 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Vladimir Oltean May 21, 2022, 9:37 p.m. UTC 
Absorb the final details of calling ocelot_port_{,un}set_dsa_8021q_cpu(),
i.e. the need to lock &ocelot->fwd_domain_lock, into the callee, to
simplify the caller and permit easier code reuse later.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 drivers/net/dsa/ocelot/felix.c     | 36 ++++++++----------------------
 drivers/net/ethernet/mscc/ocelot.c |  8 +++++++
 2 files changed, 17 insertions(+), 27 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index b60d6e7295e1..033f7d5cc03d 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -240,31 +240,6 @@  static int felix_tag_8021q_vlan_del(struct dsa_switch *ds, int port, u16 vid)
 	return 0;
 }
 
-/* Alternatively to using the NPI functionality, that same hardware MAC
- * connected internally to the enetc or fman DSA master can be configured to
- * use the software-defined tag_8021q frame format. As far as the hardware is
- * concerned, it thinks it is a "dumb switch" - the queues of the CPU port
- * module are now disconnected from it, but can still be accessed through
- * register-based MMIO.
- */
-static void felix_8021q_cpu_port_init(struct ocelot *ocelot, int port)
-{
-	mutex_lock(&ocelot->fwd_domain_lock);
-
-	ocelot_port_set_dsa_8021q_cpu(ocelot, port);
-
-	mutex_unlock(&ocelot->fwd_domain_lock);
-}
-
-static void felix_8021q_cpu_port_deinit(struct ocelot *ocelot, int port)
-{
-	mutex_lock(&ocelot->fwd_domain_lock);
-
-	ocelot_port_unset_dsa_8021q_cpu(ocelot, port);
-
-	mutex_unlock(&ocelot->fwd_domain_lock);
-}
-
 static int felix_trap_get_cpu_port(struct dsa_switch *ds,
 				   const struct ocelot_vcap_filter *trap)
 {
@@ -423,6 +398,13 @@  static unsigned long felix_tag_npi_get_host_fwd_mask(struct dsa_switch *ds)
 	return BIT(ocelot->num_phys_ports);
 }
 
+/* Alternatively to using the NPI functionality, that same hardware MAC
+ * connected internally to the enetc or fman DSA master can be configured to
+ * use the software-defined tag_8021q frame format. As far as the hardware is
+ * concerned, it thinks it is a "dumb switch" - the queues of the CPU port
+ * module are now disconnected from it, but can still be accessed through
+ * register-based MMIO.
+ */
 static const struct felix_tag_proto_ops felix_tag_npi_proto_ops = {
 	.setup			= felix_tag_npi_setup,
 	.teardown		= felix_tag_npi_teardown,
@@ -440,7 +422,7 @@  static int felix_tag_8021q_setup(struct dsa_switch *ds)
 		return err;
 
 	dsa_switch_for_each_cpu_port(cpu_dp, ds) {
-		felix_8021q_cpu_port_init(ocelot, cpu_dp->index);
+		ocelot_port_set_dsa_8021q_cpu(ocelot, cpu_dp->index);
 
 		/* TODO we could support multiple CPU ports in tag_8021q mode */
 		break;
@@ -490,7 +472,7 @@  static void felix_tag_8021q_teardown(struct dsa_switch *ds)
 	}
 
 	dsa_switch_for_each_cpu_port(cpu_dp, ds) {
-		felix_8021q_cpu_port_deinit(ocelot, cpu_dp->index);
+		ocelot_port_unset_dsa_8021q_cpu(ocelot, cpu_dp->index);
 
 		/* TODO we could support multiple CPU ports in tag_8021q mode */
 		break;
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 4011a7968be5..d208d57f4894 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -2195,6 +2195,8 @@  void ocelot_port_set_dsa_8021q_cpu(struct ocelot *ocelot, int port)
 {
 	u16 vid;
 
+	mutex_lock(&ocelot->fwd_domain_lock);
+
 	ocelot->ports[port]->is_dsa_8021q_cpu = true;
 
 	for (vid = OCELOT_RSV_VLAN_RANGE_START; vid < VLAN_N_VID; vid++)
@@ -2203,6 +2205,8 @@  void ocelot_port_set_dsa_8021q_cpu(struct ocelot *ocelot, int port)
 	ocelot_update_pgid_cpu(ocelot);
 
 	ocelot_apply_bridge_fwd_mask(ocelot, true);
+
+	mutex_unlock(&ocelot->fwd_domain_lock);
 }
 EXPORT_SYMBOL_GPL(ocelot_port_set_dsa_8021q_cpu);
 
@@ -2210,6 +2214,8 @@  void ocelot_port_unset_dsa_8021q_cpu(struct ocelot *ocelot, int port)
 {
 	u16 vid;
 
+	mutex_lock(&ocelot->fwd_domain_lock);
+
 	ocelot->ports[port]->is_dsa_8021q_cpu = false;
 
 	for (vid = OCELOT_RSV_VLAN_RANGE_START; vid < VLAN_N_VID; vid++)
@@ -2218,6 +2224,8 @@  void ocelot_port_unset_dsa_8021q_cpu(struct ocelot *ocelot, int port)
 	ocelot_update_pgid_cpu(ocelot);
 
 	ocelot_apply_bridge_fwd_mask(ocelot, true);
+
+	mutex_unlock(&ocelot->fwd_domain_lock);
 }
 EXPORT_SYMBOL_GPL(ocelot_port_unset_dsa_8021q_cpu);