@@ -1,39 +1,29 @@
# SPDX-License-Identifier: GPL-2.0-only
-config NET_DSA_MICROCHIP_KSZ_COMMON
- select NET_DSA_TAG_KSZ
- tristate
-
-menuconfig NET_DSA_MICROCHIP_KSZ9477
- tristate "Microchip KSZ9477 series switch support"
+menuconfig NET_DSA_MICROCHIP_KSZ_COMMON
+ tristate "Microchip KSZ8795/KSZ9477 series switch support"
depends on NET_DSA
- select NET_DSA_MICROCHIP_KSZ_COMMON
+ select NET_DSA_TAG_KSZ
help
- This driver adds support for Microchip KSZ9477 switch chips.
+ This driver adds support for Microchip KSZ9477 series switch and
+ KSZ8795/KSZ88x3 switch chips.
config NET_DSA_MICROCHIP_KSZ9477_I2C
tristate "KSZ9477 series I2C connected switch driver"
- depends on NET_DSA_MICROCHIP_KSZ9477 && I2C
+ depends on NET_DSA_MICROCHIP_KSZ_COMMON && I2C
select REGMAP_I2C
help
Select to enable support for registering switches configured through I2C.
config NET_DSA_MICROCHIP_KSZ9477_SPI
tristate "KSZ9477 series SPI connected switch driver"
- depends on NET_DSA_MICROCHIP_KSZ9477 && SPI
+ depends on NET_DSA_MICROCHIP_KSZ_COMMON && SPI
select REGMAP_SPI
help
Select to enable support for registering switches configured through SPI.
-menuconfig NET_DSA_MICROCHIP_KSZ8795
- tristate "Microchip KSZ8795 series switch support"
- depends on NET_DSA
- select NET_DSA_MICROCHIP_KSZ_COMMON
- help
- This driver adds support for Microchip KSZ8795/KSZ88X3 switch chips.
-
config NET_DSA_MICROCHIP_KSZ8795_SPI
tristate "KSZ8795 series SPI connected switch driver"
- depends on NET_DSA_MICROCHIP_KSZ8795 && SPI
+ depends on NET_DSA_MICROCHIP_KSZ_COMMON && SPI
select REGMAP_SPI
help
This driver accesses KSZ8795 chip through SPI.
@@ -43,7 +33,7 @@ config NET_DSA_MICROCHIP_KSZ8795_SPI
config NET_DSA_MICROCHIP_KSZ8863_SMI
tristate "KSZ series SMI connected switch driver"
- depends on NET_DSA_MICROCHIP_KSZ8795
+ depends on NET_DSA_MICROCHIP_KSZ_COMMON
select MDIO_BITBANG
help
Select to enable support for registering switches configured through
@@ -1,8 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_common.o
-obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477) += ksz9477.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_switch.o
+ksz_switch-objs := ksz_common.o
+ksz_switch-objs += ksz9477.o
+ksz_switch-objs += ksz8795.o
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C) += ksz9477_i2c.o
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI) += ksz9477_spi.o
-obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795) += ksz8795.o
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8795_SPI) += ksz8795_spi.o
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ8863_SMI) += ksz8863_smi.o
@@ -503,7 +503,6 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port)
spin_unlock(&mib->stats64_lock);
}
-EXPORT_SYMBOL_GPL(ksz_r_mib_stats64);
static void ksz_get_stats64(struct dsa_switch *ds, int port,
struct rtnl_link_stats64 *s)
@@ -674,7 +673,6 @@ void ksz_init_mib_timer(struct ksz_device *dev)
memset(mib->counters, 0, dev->info->mib_cnt * sizeof(u64));
}
}
-EXPORT_SYMBOL_GPL(ksz_init_mib_timer);
static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
{
@@ -901,7 +899,6 @@ void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
ksz_update_port_member(dev, port);
}
-EXPORT_SYMBOL_GPL(ksz_port_stp_state_set);
static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
int port,
This patch replaces the two different menuconfig for ksz9477 and ksz8795 to single ksz_common. so that it can be extended for the other switch like lan937x. And removes the export_symbols for the extern functions in the ksz_common.h. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> --- drivers/net/dsa/microchip/Kconfig | 28 +++++++++----------------- drivers/net/dsa/microchip/Makefile | 7 ++++--- drivers/net/dsa/microchip/ksz_common.c | 3 --- 3 files changed, 13 insertions(+), 25 deletions(-)