@@ -155,8 +155,8 @@ static int lan743x_otp_write(struct lan743x_adapter *adapter, u32 offset,
return 0;
}
-static int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter,
- u16 timeout)
+int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter,
+ u16 timeout)
{
u16 timeout_cnt = 0;
u32 val;
@@ -192,7 +192,7 @@ static int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter,
return 0;
}
-static void lan743x_hs_syslock_release(struct lan743x_adapter *adapter)
+void lan743x_hs_syslock_release(struct lan743x_adapter *adapter)
{
u32 val;
@@ -22,20 +22,36 @@
#define MMD_ACCESS_WRITE 1
#define MMD_ACCESS_READ 2
#define MMD_ACCESS_READ_INC 3
+#define PCS_POWER_STATE_DOWN 0x6
+#define PCS_POWER_STATE_UP 0x4
static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
{
u32 chip_rev;
+ u32 cfg_load;
+ u32 hw_cfg;
u32 strap;
+ int ret;
+
+ /* Timeout = 100 (i.e. 1 sec (10 msce * 100)) */
+ ret = lan743x_hs_syslock_acquire(adapter, 100);
+ if (ret < 0) {
+ netif_err(adapter, drv, adapter->netdev,
+ "Sys Lock acquire failed ret:%d\n", ret);
+ return;
+ }
- strap = lan743x_csr_read(adapter, STRAP_READ);
- if (strap & STRAP_READ_USE_SGMII_EN_) {
+ cfg_load = lan743x_csr_read(adapter, ETH_SYS_CONFIG_LOAD_STARTED_REG);
+ lan743x_hs_syslock_release(adapter);
+ hw_cfg = lan743x_csr_read(adapter, HW_CFG);
+
+ if (cfg_load & GEN_SYS_LOAD_STARTED_REG_ETH_ ||
+ hw_cfg & HW_CFG_RST_PROTECT_) {
+ strap = lan743x_csr_read(adapter, STRAP_READ);
if (strap & STRAP_READ_SGMII_EN_)
adapter->is_sgmii_en = true;
else
adapter->is_sgmii_en = false;
- netif_dbg(adapter, drv, adapter->netdev,
- "STRAP_READ: 0x%08X\n", strap);
} else {
chip_rev = lan743x_csr_read(adapter, FPGA_REV);
if (chip_rev) {
@@ -43,12 +59,12 @@ static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
adapter->is_sgmii_en = true;
else
adapter->is_sgmii_en = false;
- netif_dbg(adapter, drv, adapter->netdev,
- "FPGA_REV: 0x%08X\n", chip_rev);
} else {
adapter->is_sgmii_en = false;
}
}
+ netif_dbg(adapter, drv, adapter->netdev,
+ "SGMII I/F %sable\n", adapter->is_sgmii_en ? "En" : "Dis");
}
static bool is_pci11x1x_chip(struct lan743x_adapter *adapter)
@@ -977,6 +993,250 @@ static int lan743x_sgmii_write(struct lan743x_adapter *adapter,
return ret;
}
+static int lan743x_sgmii_mpll_set(struct lan743x_adapter *adapter,
+ u16 baud)
+{
+ int mpllctrl0;
+ int mpllctrl1;
+ int miscctrl1;
+ int ret;
+
+ mpllctrl0 = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+ VR_MII_GEN2_4_MPLL_CTRL0);
+ if (mpllctrl0 < 0)
+ return mpllctrl0;
+
+ mpllctrl0 &= ~VR_MII_MPLL_CTRL0_USE_REFCLK_PAD_;
+ if (baud == VR_MII_BAUD_RATE_1P25GBPS) {
+ mpllctrl1 = VR_MII_MPLL_MULTIPLIER_100;
+ /* mpll_baud_clk/4 */
+ miscctrl1 = 0xA;
+ } else {
+ mpllctrl1 = VR_MII_MPLL_MULTIPLIER_125;
+ /* mpll_baud_clk/2 */
+ miscctrl1 = 0x5;
+ }
+
+ ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+ VR_MII_GEN2_4_MPLL_CTRL0, mpllctrl0);
+ if (ret < 0)
+ return ret;
+
+ ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+ VR_MII_GEN2_4_MPLL_CTRL1, mpllctrl1);
+ if (ret < 0)
+ return ret;
+
+ return lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+ VR_MII_GEN2_4_MISC_CTRL1, miscctrl1);
+}
+
+static int lan743x_sgmii_2_5G_mode_set(struct lan743x_adapter *adapter,
+ bool enable)
+{
+ if (enable)
+ return lan743x_sgmii_mpll_set(adapter,
+ VR_MII_BAUD_RATE_3P125GBPS);
+ else
+ return lan743x_sgmii_mpll_set(adapter,
+ VR_MII_BAUD_RATE_1P25GBPS);
+}
+
+static int lan743x_is_sgmii_2_5G_mode(struct lan743x_adapter *adapter,
+ bool *status)
+{
+ int ret;
+
+ ret = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+ VR_MII_GEN2_4_MPLL_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ if (ret == VR_MII_MPLL_MULTIPLIER_125 ||
+ ret == VR_MII_MPLL_MULTIPLIER_50)
+ *status = true;
+ else
+ *status = false;
+
+ return 0;
+}
+
+static int lan743x_sgmii_aneg_update(struct lan743x_adapter *adapter)
+{
+ enum lan743x_sgmii_lsd lsd = adapter->sgmii_lsd;
+ int mii_ctrl;
+ int dgt_ctrl;
+ int an_ctrl;
+ int ret;
+
+ if (lsd == LINK_2500_MASTER || lsd == LINK_2500_SLAVE)
+ /* Switch to 2.5 Gbps */
+ ret = lan743x_sgmii_2_5G_mode_set(adapter, true);
+ else
+ /* Switch to 10/100/1000 Mbps clock */
+ ret = lan743x_sgmii_2_5G_mode_set(adapter, false);
+ if (ret < 0)
+ return ret;
+
+ /* Enable SGMII Auto NEG */
+ mii_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
+ if (mii_ctrl < 0)
+ return mii_ctrl;
+
+ an_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, VR_MII_AN_CTRL);
+ if (an_ctrl < 0)
+ return an_ctrl;
+
+ dgt_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+ VR_MII_DIG_CTRL1);
+ if (dgt_ctrl < 0)
+ return dgt_ctrl;
+
+ if (lsd == LINK_2500_MASTER || lsd == LINK_2500_SLAVE) {
+ mii_ctrl &= ~(BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100);
+ mii_ctrl |= BMCR_SPEED1000;
+ dgt_ctrl |= VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_;
+ dgt_ctrl &= ~VR_MII_DIG_CTRL1_MAC_AUTO_SW_;
+ /* In order for Auto-Negotiation to operate properly at
+ * 2.5 Gbps the 1.6ms link timer values must be adjusted
+ * The VR_MII_LINK_TIMER_CTRL Register must be set to
+ * 16'h7A1 and The CL37_TMR_OVR_RIDE bit of the
+ * VR_MII_DIG_CTRL1 Register set to 1
+ */
+ ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+ VR_MII_LINK_TIMER_CTRL, 0x7A1);
+ if (ret < 0)
+ return ret;
+ } else {
+ mii_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ an_ctrl &= ~VR_MII_AN_CTRL_SGMII_LINK_STS_;
+ dgt_ctrl &= ~VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_;
+ dgt_ctrl |= VR_MII_DIG_CTRL1_MAC_AUTO_SW_;
+ }
+
+ ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR,
+ mii_ctrl);
+ if (ret < 0)
+ return ret;
+
+ ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+ VR_MII_DIG_CTRL1, dgt_ctrl);
+ if (ret < 0)
+ return ret;
+
+ return lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+ VR_MII_AN_CTRL, an_ctrl);
+}
+
+static int lan743x_pcs_seq_state(struct lan743x_adapter *adapter, u8 state)
+{
+ u8 wait_cnt = 0;
+ u32 dig_sts;
+
+ do {
+ dig_sts = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+ VR_MII_DIG_STS);
+ if (((dig_sts & VR_MII_DIG_STS_PSEQ_STATE_MASK_) >>
+ VR_MII_DIG_STS_PSEQ_STATE_POS_) == state)
+ break;
+ usleep_range(1000, 2000);
+ } while (wait_cnt++ < 10);
+
+ if (wait_cnt >= 10)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int lan743x_sgmii_config(struct lan743x_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct phy_device *phydev = netdev->phydev;
+ enum lan743x_sgmii_lsd lsd = POWER_DOWN;
+ int mii_ctl;
+ bool status;
+ int ret;
+
+ switch (phydev->speed) {
+ case SPEED_2500:
+ if (phydev->master_slave_state == MASTER_SLAVE_STATE_MASTER)
+ lsd = LINK_2500_MASTER;
+ else
+ lsd = LINK_2500_SLAVE;
+ break;
+ case SPEED_1000:
+ if (phydev->master_slave_state == MASTER_SLAVE_STATE_MASTER)
+ lsd = LINK_1000_MASTER;
+ else
+ lsd = LINK_1000_SLAVE;
+ break;
+ case SPEED_100:
+ if (phydev->duplex)
+ lsd = LINK_100FD;
+ else
+ lsd = LINK_100HD;
+ break;
+ case SPEED_10:
+ if (phydev->duplex)
+ lsd = LINK_10FD;
+ else
+ lsd = LINK_10HD;
+ break;
+ default:
+ netif_err(adapter, drv, adapter->netdev,
+ "Invalid speed %d\n", phydev->speed);
+ return -EINVAL;
+ }
+
+ adapter->sgmii_lsd = lsd;
+ ret = lan743x_sgmii_aneg_update(adapter);
+ if (ret < 0) {
+ netif_err(adapter, drv, adapter->netdev,
+ "error %d SGMII cfg failed\n", ret);
+ return ret;
+ }
+
+ ret = lan743x_is_sgmii_2_5G_mode(adapter, &status);
+ if (ret < 0) {
+ netif_err(adapter, drv, adapter->netdev,
+ "erro %d SGMII get mode failed\n", ret);
+ return ret;
+ }
+
+ if (status)
+ netif_dbg(adapter, drv, adapter->netdev,
+ "SGMII 2.5G mode enable\n");
+ else
+ netif_dbg(adapter, drv, adapter->netdev,
+ "SGMII 1G mode enable\n");
+
+ /* SGMII/1000/2500BASE-X PCS power down */
+ mii_ctl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
+ if (ret < 0)
+ return ret;
+
+ mii_ctl |= BMCR_PDOWN;
+ ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
+ if (ret < 0)
+ return ret;
+
+ ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_DOWN);
+ if (ret < 0)
+ return ret;
+
+ /* SGMII/1000/2500BASE-X PCS power up */
+ mii_ctl &= ~BMCR_PDOWN;
+ ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
+ if (ret < 0)
+ return ret;
+
+ ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_UP);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
static void lan743x_mac_set_address(struct lan743x_adapter *adapter,
u8 *addr)
{
@@ -1192,6 +1452,10 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)
data |= MAC_CR_CFG_H_;
data &= ~MAC_CR_CFG_L_;
break;
+ case SPEED_2500:
+ data |= MAC_CR_CFG_H_;
+ data |= MAC_CR_CFG_L_;
+ break;
}
lan743x_csr_write(adapter, MAC_CR, data);
@@ -1203,6 +1467,10 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)
lan743x_phy_update_flowcontrol(adapter, local_advertisement,
remote_advertisement);
lan743x_ptp_update_latency(adapter, phydev->speed);
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII ||
+ phydev->interface == PHY_INTERFACE_MODE_1000BASEX ||
+ phydev->interface == PHY_INTERFACE_MODE_2500BASEX)
+ lan743x_sgmii_config(adapter);
}
}
@@ -97,6 +97,11 @@
#define CONFIG_REG_ADDR_BASE (0x0000)
#define ETH_EEPROM_REG_ADDR_BASE (0x0E00)
#define ETH_OTP_REG_ADDR_BASE (0x1000)
+#define GEN_SYS_CONFIG_LOAD_STARTED_REG (0x0078)
+#define ETH_SYS_CONFIG_LOAD_STARTED_REG (ETH_SYS_REG_ADDR_BASE + \
+ CONFIG_REG_ADDR_BASE + \
+ GEN_SYS_CONFIG_LOAD_STARTED_REG)
+#define GEN_SYS_LOAD_STARTED_REG_ETH_ BIT(4)
#define SYS_LOCK_REG (0x00A0)
#define SYS_LOCK_REG_MAIN_LOCK_ BIT(7)
#define SYS_LOCK_REG_GEN_PERI_LOCK_ BIT(5)
@@ -304,6 +309,66 @@
#define SGMII_CTL_LINK_STATUS_SOURCE_ BIT(8)
#define SGMII_CTL_SGMII_POWER_DN_ BIT(1)
+/* Vendor Specific SGMII MMD details */
+#define SR_VSMMD_PCS_ID1 0x0004
+#define SR_VSMMD_PCS_ID2 0x0005
+#define SR_VSMMD_STS 0x0008
+#define SR_VSMMD_CTRL 0x0009
+
+#define VR_MII_DIG_CTRL1 0x8000
+#define VR_MII_DIG_CTRL1_VR_RST_ BIT(15)
+#define VR_MII_DIG_CTRL1_R2TLBE_ BIT(14)
+#define VR_MII_DIG_CTRL1_EN_VSMMD1_ BIT(13)
+#define VR_MII_DIG_CTRL1_CS_EN_ BIT(10)
+#define VR_MII_DIG_CTRL1_MAC_AUTO_SW_ BIT(9)
+#define VR_MII_DIG_CTRL1_INIT_ BIT(8)
+#define VR_MII_DIG_CTRL1_DTXLANED_0_ BIT(4)
+#define VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_ BIT(3)
+#define VR_MII_DIG_CTRL1_EN_2_5G_MODE_ BIT(2)
+#define VR_MII_DIG_CTRL1_BYP_PWRUP_ BIT(1)
+#define VR_MII_DIG_CTRL1_PHY_MODE_CTRL_ BIT(0)
+#define VR_MII_AN_CTRL 0x8001
+#define VR_MII_AN_CTRL_MII_CTRL_ BIT(8)
+#define VR_MII_AN_CTRL_SGMII_LINK_STS_ BIT(4)
+#define VR_MII_AN_CTRL_TX_CONFIG_ BIT(3)
+#define VR_MII_AN_CTRL_1000BASE_X_ (0)
+#define VR_MII_AN_CTRL_SGMII_MODE_ (2)
+#define VR_MII_AN_CTRL_QSGMII_MODE_ (3)
+#define VR_MII_AN_CTRL_PCS_MODE_SHIFT_ (1)
+#define VR_MII_AN_CTRL_PCS_MODE_MASK_ GENMASK(2, 1)
+#define VR_MII_AN_CTRL_MII_AN_INTR_EN_ BIT(0)
+#define VR_MII_AN_INTR_STS 0x8002
+#define VR_MII_AN_INTR_STS_LINK_UP_ BIT(4)
+#define VR_MII_AN_INTR_STS_SPEED_MASK_ GENMASK(3, 2)
+#define VR_MII_AN_INTR_STS_1000_MBPS_ BIT(3)
+#define VR_MII_AN_INTR_STS_100_MBPS_ BIT(2)
+#define VR_MII_AN_INTR_STS_10_MBPS_ (0)
+#define VR_MII_AN_INTR_STS_FDX_ BIT(1)
+#define VR_MII_AN_INTR_STS_CL37_ANCMPLT_INTR_ BIT(0)
+
+#define VR_MII_LINK_TIMER_CTRL 0x800A
+#define VR_MII_DIG_STS 0x8010
+#define VR_MII_DIG_STS_PSEQ_STATE_MASK_ GENMASK(4, 2)
+#define VR_MII_DIG_STS_PSEQ_STATE_POS_ (2)
+#define VR_MII_GEN2_4_MPLL_CTRL0 0x8078
+#define VR_MII_MPLL_CTRL0_REF_CLK_DIV2_ BIT(12)
+#define VR_MII_MPLL_CTRL0_USE_REFCLK_PAD_ BIT(4)
+#define VR_MII_GEN2_4_MPLL_CTRL1 0x8079
+#define VR_MII_MPLL_CTRL1_MPLL_MULTIPLIER_ GENMASK(6, 0)
+#define VR_MII_BAUD_RATE_3P125GBPS (3125)
+#define VR_MII_BAUD_RATE_1P25GBPS (1250)
+#define VR_MII_MPLL_MULTIPLIER_125 (125)
+#define VR_MII_MPLL_MULTIPLIER_100 (100)
+#define VR_MII_MPLL_MULTIPLIER_50 (50)
+#define VR_MII_MPLL_MULTIPLIER_40 (40)
+#define VR_MII_GEN2_4_MISC_CTRL1 0x809A
+#define VR_MII_CTRL1_RX_RATE_0_MASK_ GENMASK(3, 2)
+#define VR_MII_CTRL1_RX_RATE_0_SHIFT_ (2)
+#define VR_MII_CTRL1_TX_RATE_0_MASK_ GENMASK(1, 0)
+#define VR_MII_MPLL_BAUD_CLK (0)
+#define VR_MII_MPLL_BAUD_CLK_DIV_2 (1)
+#define VR_MII_MPLL_BAUD_CLK_DIV_4 (2)
+
#define INT_STS (0x780)
#define INT_BIT_DMA_RX_(channel) BIT(24 + (channel))
#define INT_BIT_ALL_RX_ (0x0F000000)
@@ -925,6 +990,21 @@ struct lan743x_rx {
struct sk_buff *skb_head, *skb_tail;
};
+/* SGMII Link Speed Duplex status */
+enum lan743x_sgmii_lsd {
+ POWER_DOWN = 0,
+ LINK_DOWN,
+ ANEG_BUSY,
+ LINK_10HD,
+ LINK_10FD,
+ LINK_100HD,
+ LINK_100FD,
+ LINK_1000_MASTER,
+ LINK_1000_SLAVE,
+ LINK_2500_MASTER,
+ LINK_2500_SLAVE
+};
+
struct lan743x_adapter {
struct net_device *netdev;
struct mii_bus *mdiobus;
@@ -952,6 +1032,8 @@ struct lan743x_adapter {
bool eth_syslock_en;
u32 eth_syslock_acquire_cnt;
struct mutex sgmii_rw_lock;
+ /* SGMII Link Speed & Duplex status */
+ enum lan743x_sgmii_lsd sgmii_lsd;
u8 max_tx_channels;
u8 used_tx_channels;
u8 max_vector_count;
@@ -1071,5 +1153,7 @@ struct lan743x_rx_buffer_info {
u32 lan743x_csr_read(struct lan743x_adapter *adapter, int offset);
void lan743x_csr_write(struct lan743x_adapter *adapter, int offset, u32 data);
+int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter, u16 timeout);
+void lan743x_hs_syslock_release(struct lan743x_adapter *adapter);
#endif /* _LAN743X_H */
Add support to SGMII 1G and 2.5G for PCI11010/PCI11414 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> --- Changes: V0 -> V1: 1. Use the MMD devices definitions from mdio.h file 2. Use MII definitions from mii.h .../net/ethernet/microchip/lan743x_ethtool.c | 6 +- drivers/net/ethernet/microchip/lan743x_main.c | 280 +++++++++++++++++- drivers/net/ethernet/microchip/lan743x_main.h | 84 ++++++ 3 files changed, 361 insertions(+), 9 deletions(-)