@@ -1196,10 +1196,13 @@ static void vsc9959_tas_gcl_set(struct ocelot *ocelot, const u32 gcl_ix,
static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
struct tc_taprio_qopt_offload *taprio)
{
+ struct ocelot_port *ocelot_port = ocelot->ports[port];
struct timespec64 base_ts;
int ret, i;
u32 val;
+ mutex_lock(&ocelot->tas_lock);
+
if (!taprio->enable) {
ocelot_rmw_rix(ocelot,
QSYS_TAG_CONFIG_INIT_GATE_STATE(0xFF),
@@ -1207,15 +1210,20 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
QSYS_TAG_CONFIG_INIT_GATE_STATE_M,
QSYS_TAG_CONFIG, port);
+ mutex_unlock(&ocelot->tas_lock);
return 0;
}
if (taprio->cycle_time > NSEC_PER_SEC ||
- taprio->cycle_time_extension >= NSEC_PER_SEC)
- return -EINVAL;
+ taprio->cycle_time_extension >= NSEC_PER_SEC) {
+ ret = -EINVAL;
+ goto err;
+ }
- if (taprio->num_entries > VSC9959_TAS_GCL_ENTRY_MAX)
- return -ERANGE;
+ if (taprio->num_entries > VSC9959_TAS_GCL_ENTRY_MAX) {
+ ret = -ERANGE;
+ goto err;
+ }
/* Enable guard band. The switch will schedule frames without taking
* their length into account. Thus we'll always need to enable the
@@ -1236,8 +1244,10 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
* config is pending, need reset the TAS module
*/
val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_8);
- if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING)
- return -EBUSY;
+ if (val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING) {
+ ret = -EBUSY;
+ goto err;
+ }
ocelot_rmw_rix(ocelot,
QSYS_TAG_CONFIG_ENABLE |
@@ -1248,6 +1258,8 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
QSYS_TAG_CONFIG_SCH_TRAFFIC_QUEUES_M,
QSYS_TAG_CONFIG, port);
+ ocelot_port->base_time = taprio->base_time;
+
vsc9959_new_base_time(ocelot, taprio->base_time,
taprio->cycle_time, &base_ts);
ocelot_write(ocelot, base_ts.tv_nsec, QSYS_PARAM_CFG_REG_1);
@@ -1271,9 +1283,67 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
!(val & QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE),
10, 100000);
+err:
+ mutex_unlock(&ocelot->tas_lock);
+
return ret;
}
+static void vsc9959_tas_clock_adjust(struct ocelot *ocelot)
+{
+ struct ocelot_port *ocelot_port;
+ struct timespec64 base_ts;
+ u64 cycletime;
+ int port;
+ u32 val;
+
+ mutex_lock(&ocelot->tas_lock);
+
+ for (port = 0; port < ocelot->num_phys_ports; port++) {
+ val = ocelot_read_rix(ocelot, QSYS_TAG_CONFIG, port);
+ if (!(val & QSYS_TAG_CONFIG_ENABLE))
+ continue;
+
+ ocelot_rmw(ocelot,
+ QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port),
+ QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM_M,
+ QSYS_TAS_PARAM_CFG_CTRL);
+
+ ocelot_rmw_rix(ocelot,
+ QSYS_TAG_CONFIG_INIT_GATE_STATE(0xFF),
+ QSYS_TAG_CONFIG_ENABLE |
+ QSYS_TAG_CONFIG_INIT_GATE_STATE_M,
+ QSYS_TAG_CONFIG, port);
+
+ cycletime = ocelot_read(ocelot, QSYS_PARAM_CFG_REG_4);
+ ocelot_port = ocelot->ports[port];
+
+ vsc9959_new_base_time(ocelot, ocelot_port->base_time,
+ cycletime, &base_ts);
+
+ ocelot_write(ocelot, base_ts.tv_nsec, QSYS_PARAM_CFG_REG_1);
+ ocelot_write(ocelot, lower_32_bits(base_ts.tv_sec),
+ QSYS_PARAM_CFG_REG_2);
+ val = upper_32_bits(base_ts.tv_sec);
+ ocelot_rmw(ocelot,
+ QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB(val),
+ QSYS_PARAM_CFG_REG_3_BASE_TIME_SEC_MSB_M,
+ QSYS_PARAM_CFG_REG_3);
+
+ ocelot_rmw(ocelot, QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE,
+ QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE,
+ QSYS_TAS_PARAM_CFG_CTRL);
+
+ ocelot_rmw_rix(ocelot,
+ QSYS_TAG_CONFIG_INIT_GATE_STATE(0xFF) |
+ QSYS_TAG_CONFIG_ENABLE,
+ QSYS_TAG_CONFIG_ENABLE |
+ QSYS_TAG_CONFIG_INIT_GATE_STATE_M,
+ QSYS_TAG_CONFIG, port);
+ }
+ mutex_unlock(&ocelot->tas_lock);
+}
+
static int vsc9959_qos_port_cbs_set(struct dsa_switch *ds, int port,
struct tc_cbs_qopt_offload *cbs_qopt)
{
@@ -2210,6 +2280,7 @@ static const struct ocelot_ops vsc9959_ops = {
.psfp_filter_del = vsc9959_psfp_filter_del,
.psfp_stats_get = vsc9959_psfp_stats_get,
.cut_through_fwd = vsc9959_cut_through_fwd,
+ .tas_clock_adjust = vsc9959_tas_clock_adjust,
};
static const struct felix_info felix_info_vsc9959 = {
@@ -3367,6 +3367,7 @@ int ocelot_init(struct ocelot *ocelot)
mutex_init(&ocelot->ptp_lock);
mutex_init(&ocelot->mact_lock);
mutex_init(&ocelot->fwd_domain_lock);
+ mutex_init(&ocelot->tas_lock);
spin_lock_init(&ocelot->ptp_clock_lock);
spin_lock_init(&ocelot->ts_id_lock);
snprintf(queue_name, sizeof(queue_name), "%s-stats",
@@ -72,6 +72,10 @@ int ocelot_ptp_settime64(struct ptp_clock_info *ptp,
ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+
+ if (ocelot->ops->tas_clock_adjust)
+ ocelot->ops->tas_clock_adjust(ocelot);
+
return 0;
}
EXPORT_SYMBOL(ocelot_ptp_settime64);
@@ -105,6 +109,9 @@ int ocelot_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
ocelot_write_rix(ocelot, val, PTP_PIN_CFG, TOD_ACC_PIN);
spin_unlock_irqrestore(&ocelot->ptp_clock_lock, flags);
+
+ if (ocelot->ops->tas_clock_adjust)
+ ocelot->ops->tas_clock_adjust(ocelot);
} else {
/* Fall back using ocelot_ptp_settime64 which is not exact. */
struct timespec64 ts;
@@ -117,6 +124,7 @@ int ocelot_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
ocelot_ptp_settime64(ptp, &ts);
}
+
return 0;
}
EXPORT_SYMBOL(ocelot_ptp_adjtime);
@@ -575,6 +575,7 @@ struct ocelot_ops {
int (*psfp_stats_get)(struct ocelot *ocelot, struct flow_cls_offload *f,
struct flow_stats *stats);
void (*cut_through_fwd)(struct ocelot *ocelot);
+ void (*tas_clock_adjust)(struct ocelot *ocelot);
};
struct ocelot_vcap_policer {
@@ -691,6 +692,9 @@ struct ocelot_port {
int bridge_num;
int speed;
+
+ /* Store the AdminBaseTime of EST fetched from userspace. */
+ s64 base_time;
};
struct ocelot {
@@ -757,6 +761,9 @@ struct ocelot {
/* Lock for serializing forwarding domain changes */
struct mutex fwd_domain_lock;
+ /* Lock for serializing Time-Aware Shaper changes */
+ struct mutex tas_lock;
+
struct workqueue_struct *owq;
u8 ptp:1;
When adjusting the PTP clock, the base time of the TAS configuration will become unreliable. We need reset the TAS configuration by using a new base time. For example, if the driver gets a base time 0 of Qbv configuration from user, and current time is 20000. The driver will set the TAS base time to be 20000. After the PTP clock adjustment, the current time becomes 10000. If the TAS base time is still 20000, it will be a future time, and TAS entry list will stop running. Another example, if the current time becomes to be 10000000 after PTP clock adjust, a large time offset can cause the hardware to hang. This patch introduces a tas_clock_adjust() function to reset the TAS module by using a new base time after the PTP clock adjustment. This can avoid issues above. Due to PTP clock adjustment can occur at any time, it may conflict with the TAS configuration. We introduce a new TAS lock to serialize the access to the TAS registers. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> --- v2: Update ocelot_ptp_adjtime() function to avoid tas_clock_adjust() be called twice. --- drivers/net/dsa/ocelot/felix_vsc9959.c | 83 ++++++++++++++++++++++++-- drivers/net/ethernet/mscc/ocelot.c | 1 + drivers/net/ethernet/mscc/ocelot_ptp.c | 8 +++ include/soc/mscc/ocelot.h | 7 +++ 4 files changed, 93 insertions(+), 6 deletions(-)