| Message ID | 20220623085125.1426049-2-enguerrand.de-ribaucourt@savoirfairelinux.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [1/2] net: dp83822: disable false carrier interrupt | expand |
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c index 95ef507053a6..8549e0e356c9 100644 --- a/drivers/net/phy/dp83822.c +++ b/drivers/net/phy/dp83822.c @@ -229,8 +229,7 @@ static int dp83822_config_intr(struct phy_device *phydev) if (misr_status < 0) return misr_status; - misr_status |= (DP83822_RX_ERR_HF_INT_EN | - DP83822_LINK_STAT_INT_EN | + misr_status |= (DP83822_LINK_STAT_INT_EN | DP83822_ENERGY_DET_INT_EN | DP83822_LINK_QUAL_INT_EN);
Some RX errors, notably when disconnecting the cable, increase the RCSR register. Once half full (0x7fff), an interrupt flood is generated. I measured ~3k/s interrupts even after the RX errors transfer was stopped. Since we don't read and clear the RCSR register, we should disable this interrupt. Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> --- drivers/net/phy/dp83822.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)