@@ -473,7 +473,8 @@ static inline const char *wpan_phy_name(struct wpan_phy *phy)
return dev_name(&phy->dev);
}
-void ieee802154_configure_durations(struct wpan_phy *phy);
+void ieee802154_configure_durations(struct wpan_phy *phy,
+ unsigned int page, unsigned int channel);
struct ieee802154_coord_desc *
cfg802154_alloc_coordinator(struct ieee802154_addr *coord);
@@ -118,7 +118,7 @@ ieee802154_set_channel(struct wpan_phy *wpan_phy, u8 page, u8 channel)
if (!ret) {
wpan_phy->current_page = page;
wpan_phy->current_channel = channel;
- ieee802154_configure_durations(wpan_phy);
+ ieee802154_configure_durations(wpan_phy, page, channel);
}
return ret;
@@ -113,32 +113,33 @@ ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops)
}
EXPORT_SYMBOL(ieee802154_alloc_hw);
-void ieee802154_configure_durations(struct wpan_phy *phy)
+void ieee802154_configure_durations(struct wpan_phy *phy,
+ unsigned int page, unsigned int channel)
{
u32 duration = 0;
- switch (phy->current_page) {
+ switch (page) {
case 0:
- if (BIT(phy->current_channel) & 0x1)
+ if (BIT(channel) & 0x1)
/* 868 MHz BPSK 802.15.4-2003: 20 ksym/s */
duration = 50 * NSEC_PER_USEC;
- else if (BIT(phy->current_channel) & 0x7FE)
+ else if (BIT(channel) & 0x7FE)
/* 915 MHz BPSK 802.15.4-2003: 40 ksym/s */
duration = 25 * NSEC_PER_USEC;
- else if (BIT(phy->current_channel) & 0x7FFF800)
+ else if (BIT(channel) & 0x7FFF800)
/* 2400 MHz O-QPSK 802.15.4-2006: 62.5 ksym/s */
duration = 16 * NSEC_PER_USEC;
break;
case 2:
- if (BIT(phy->current_channel) & 0x1)
+ if (BIT(channel) & 0x1)
/* 868 MHz O-QPSK 802.15.4-2006: 25 ksym/s */
duration = 40 * NSEC_PER_USEC;
- else if (BIT(phy->current_channel) & 0x7FE)
+ else if (BIT(channel) & 0x7FE)
/* 915 MHz O-QPSK 802.15.4-2006: 62.5 ksym/s */
duration = 16 * NSEC_PER_USEC;
break;
case 3:
- if (BIT(phy->current_channel) & 0x3FFF)
+ if (BIT(channel) & 0x3FFF)
/* 2.4 GHz CSS 802.15.4a-2007: 1/6 Msym/s */
duration = 6 * NSEC_PER_USEC;
break;
@@ -201,7 +202,8 @@ int ieee802154_register_hw(struct ieee802154_hw *hw)
ieee802154_setup_wpan_phy_pib(local->phy);
- ieee802154_configure_durations(local->phy);
+ ieee802154_configure_durations(local->phy, local->phy->current_page,
+ local->phy->current_channel);
if (!(hw->flags & IEEE802154_HW_CSMA_PARAMS)) {
local->phy->supported.min_csma_backoffs = 4;
The scan logic will bypass the whole ->set_channel() logic from the top by calling the driver hook to just switch between channels when required. We can no longer rely on the "current" page/channel settings to set the right symbol duration. Let's add these as new parameters to allow providing the page/channel couple that we want. There is no functional change. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- include/net/cfg802154.h | 3 ++- net/mac802154/cfg.c | 2 +- net/mac802154/main.c | 20 +++++++++++--------- 3 files changed, 14 insertions(+), 11 deletions(-)