| Message ID | 20220704122613.1551119-14-mkl@pengutronix.de (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | d5a972f561a003e302e4267340c57e8fbd096fa4 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net,01/15] can: bcm: use call_rcu() instead of costly synchronize_rcu() | expand |
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c index b21252390216..34b160024ce3 100644 --- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c +++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c @@ -1650,6 +1650,7 @@ static int mcp251xfd_stop(struct net_device *ndev) netif_stop_queue(ndev); set_bit(MCP251XFD_FLAGS_DOWN, priv->flags); hrtimer_cancel(&priv->rx_irq_timer); + hrtimer_cancel(&priv->tx_irq_timer); mcp251xfd_chip_interrupts_disable(priv); free_irq(ndev->irq, priv); can_rx_offload_disable(&priv->offload);
In commit 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing support") software based TX coalescing was added to the driver. The key idea is to keep the TX complete IRQ disabled for some time after processing it and re-enable later by a hrtimer. When bringing the interface down, this timer has to be stopped. Add the missing hrtimer_cancel() of the tx_irq_time hrtimer to mcp251xfd_stop(). Link: https://lore.kernel.org/all/20220620143942.891811-1-mkl@pengutronix.de Fixes: 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing support") Cc: stable@vger.kernel.org # v5.18 Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 1 + 1 file changed, 1 insertion(+)