diff mbox series

[stable,4.14] net: dsa: bcm_sf2: force pause link settings

Message ID 20220704153510.3859649-2-f.fainelli@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series [stable,4.14] net: dsa: bcm_sf2: force pause link settings | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Florian Fainelli July 4, 2022, 3:35 p.m. UTC 
From: Doug Berger <opendmb@gmail.com>

commit 7c97bc0128b2eecc703106112679a69d446d1a12 upstream

The pause settings reported by the PHY should also be applied to the GMII port
status override otherwise the switch will not generate pause frames towards the
link partner despite the advertisement saying otherwise.

Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/bcm_sf2.c | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 11a72c4cbb92..b838d6bf3165 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -701,6 +701,11 @@  static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
 		reg |= LINK_STS;
 	if (phydev->duplex == DUPLEX_FULL)
 		reg |= DUPLX_MODE;
+	if (phydev->pause) {
+		if (phydev->asym_pause)
+			reg |= TXFLOW_CNTL;
+		reg |= RXFLOW_CNTL;
+	}
 
 	core_writel(priv, reg, offset);