diff mbox series

[v3,5/9] dt-bindings: net: Add Tegra234 MGBE

Message ID 20220706213255.1473069-6-thierry.reding@gmail.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series tegra: Add support for MGBE controller | expand

Checks

Context Check Description
netdev/tree_selection success Guessing tree name failed - patch did not apply

Commit Message

Thierry Reding July 6, 2022, 9:32 p.m. UTC
From: Bhadram Varka <vbhadram@nvidia.com>

Add device-tree binding documentation for the Multi-Gigabit Ethernet
(MGBE) controller found on NVIDIA Tegra234 SoCs.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v3:
- add macsec and macsec-ns interrupt names
- improve mdio bus node description
- drop power-domains description
- improve bindings title

Changes in v2:
- add supported PHY modes
- change to dual license

 .../bindings/net/nvidia,tegra234-mgbe.yaml    | 169 ++++++++++++++++++
 1 file changed, 169 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml

Comments

Rob Herring (Arm) July 7, 2022, 4:59 a.m. UTC | #1
On Wed, 06 Jul 2022 23:32:51 +0200, Thierry Reding wrote:
> From: Bhadram Varka <vbhadram@nvidia.com>
> 
> Add device-tree binding documentation for the Multi-Gigabit Ethernet
> (MGBE) controller found on NVIDIA Tegra234 SoCs.
> 
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> Changes in v3:
> - add macsec and macsec-ns interrupt names
> - improve mdio bus node description
> - drop power-domains description
> - improve bindings title
> 
> Changes in v2:
> - add supported PHY modes
> - change to dual license
> 
>  .../bindings/net/nvidia,tegra234-mgbe.yaml    | 169 ++++++++++++++++++
>  1 file changed, 169 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.example.dts:53.34-35 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:383: Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1404: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Thierry Reding July 7, 2022, 6:17 a.m. UTC | #2
On Wed, Jul 06, 2022 at 10:59:49PM -0600, Rob Herring wrote:
> On Wed, 06 Jul 2022 23:32:51 +0200, Thierry Reding wrote:
> > From: Bhadram Varka <vbhadram@nvidia.com>
> > 
> > Add device-tree binding documentation for the Multi-Gigabit Ethernet
> > (MGBE) controller found on NVIDIA Tegra234 SoCs.
> > 
> > Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> > Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
> > Signed-off-by: Thierry Reding <treding@nvidia.com>
> > ---
> > Changes in v3:
> > - add macsec and macsec-ns interrupt names
> > - improve mdio bus node description
> > - drop power-domains description
> > - improve bindings title
> > 
> > Changes in v2:
> > - add supported PHY modes
> > - change to dual license
> > 
> >  .../bindings/net/nvidia,tegra234-mgbe.yaml    | 169 ++++++++++++++++++
> >  1 file changed, 169 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
> > 
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Error: Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.example.dts:53.34-35 syntax error
> FATAL ERROR: Unable to parse input tree

This is an error that you'd get if patch 3 is not applied. Not sure if I
managed to confuse the bot somehow, but I cannot reproduce this if I
apply the series on top of v5.19-rc1 or linux-next.

Thierry
Krzysztof Kozlowski July 7, 2022, 6:53 a.m. UTC | #3
On 07/07/2022 08:17, Thierry Reding wrote:
> On Wed, Jul 06, 2022 at 10:59:49PM -0600, Rob Herring wrote:
>> On Wed, 06 Jul 2022 23:32:51 +0200, Thierry Reding wrote:
>>> From: Bhadram Varka <vbhadram@nvidia.com>
>>>
>>> Add device-tree binding documentation for the Multi-Gigabit Ethernet
>>> (MGBE) controller found on NVIDIA Tegra234 SoCs.
>>>
>>> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
>>> Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
>>> Signed-off-by: Thierry Reding <treding@nvidia.com>
>>> ---
>>> Changes in v3:
>>> - add macsec and macsec-ns interrupt names
>>> - improve mdio bus node description
>>> - drop power-domains description
>>> - improve bindings title
>>>
>>> Changes in v2:
>>> - add supported PHY modes
>>> - change to dual license
>>>
>>>  .../bindings/net/nvidia,tegra234-mgbe.yaml    | 169 ++++++++++++++++++
>>>  1 file changed, 169 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
>>>
>>
>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
>> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>>
>> yamllint warnings/errors:
>>
>> dtschema/dtc warnings/errors:
>> Error: Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.example.dts:53.34-35 syntax error
>> FATAL ERROR: Unable to parse input tree
> 
> This is an error that you'd get if patch 3 is not applied. Not sure if I
> managed to confuse the bot somehow, but I cannot reproduce this if I
> apply the series on top of v5.19-rc1 or linux-next.

Patch number 3 does not apply on v5.19-rc1 or linux-next, so maybe the
bot (which applies on rc1) did not have it.

Best regards,
Krzysztof
Krzysztof Kozlowski July 7, 2022, 6:56 a.m. UTC | #4
On 06/07/2022 23:32, Thierry Reding wrote:
> From: Bhadram Varka <vbhadram@nvidia.com>
> 
> Add device-tree binding documentation for the Multi-Gigabit Ethernet
> (MGBE) controller found on NVIDIA Tegra234 SoCs.
> 
> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> Changes in v3:
> - add macsec and macsec-ns interrupt names
> - improve mdio bus node description
> - drop power-domains description
> - improve bindings title
> 
> Changes in v2:
> - add supported PHY modes
> - change to dual license
> 
>  .../bindings/net/nvidia,tegra234-mgbe.yaml    | 169 ++++++++++++++++++
>  1 file changed, 169 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
> new file mode 100644
> index 000000000000..3d242ef1ca57
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
> @@ -0,0 +1,169 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/nvidia,tegra234-mgbe.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Tegra234 MGBE Multi-Gigabit Ethernet Controller
> +
> +maintainers:
> +  - Thierry Reding <treding@nvidia.com>
> +  - Jon Hunter <jonathanh@nvidia.com>
> +
> +properties:
> +

Drop the blank line.

> +  compatible:
> +    const: nvidia,tegra234-mgbe
> +
> +  reg:
> +    minItems: 3

Drop minitems (equal to maxItems)

> +    maxItems: 3
> +
> +  reg-names:
> +    items:
> +      - const: hypervisor
> +      - const: mac
> +      - const: xpcs
> +
> +  interrupts:
> +    minItems: 1

You need maxItems:3

> +
> +  interrupt-names:
> +    minItems: 1
> +    items:
> +      - const: common
> +      - const: macsec-ns
> +      - const: macsec
> +
> +  clocks:
> +    minItems: 12

Drop minItems

> +    maxItems: 12
> +
> +  clock-names:
> +    minItems: 12
> +    maxItems: 12

Drop min/max and instead list the clocks in fixed order.. The order is
always fixed, so below enum is not correct.

> +    contains:
> +      enum:
> +        - mgbe
> +        - mac
> +        - mac-divider
> +        - ptp-ref
> +        - rx-input-m
> +        - rx-input
> +        - tx
> +        - eee-pcs
> +        - rx-pcs-input
> +        - rx-pcs-m
> +        - rx-pcs
> +        - tx-pcs
> +
> +  resets:
> +    minItems: 2

Drop minItems.

> +    maxItems: 2
> +
> +  reset-names:
> +    contains:
> +      enum:

Same problem.

> +        - mac
> +        - pcs
> +
> +  interconnects:
> +    items:
> +      - description: memory read client
> +      - description: memory write client
> +
> +  interconnect-names:
> +    items:
> +      - const: dma-mem # read

I propose to drop the comment - it is obvious from "interconnects" above.


Best regards,
Krzysztof
Thierry Reding July 7, 2022, 7:43 a.m. UTC | #5
On Thu, Jul 07, 2022 at 08:53:32AM +0200, Krzysztof Kozlowski wrote:
> On 07/07/2022 08:17, Thierry Reding wrote:
> > On Wed, Jul 06, 2022 at 10:59:49PM -0600, Rob Herring wrote:
> >> On Wed, 06 Jul 2022 23:32:51 +0200, Thierry Reding wrote:
> >>> From: Bhadram Varka <vbhadram@nvidia.com>
> >>>
> >>> Add device-tree binding documentation for the Multi-Gigabit Ethernet
> >>> (MGBE) controller found on NVIDIA Tegra234 SoCs.
> >>>
> >>> Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
> >>> Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
> >>> Signed-off-by: Thierry Reding <treding@nvidia.com>
> >>> ---
> >>> Changes in v3:
> >>> - add macsec and macsec-ns interrupt names
> >>> - improve mdio bus node description
> >>> - drop power-domains description
> >>> - improve bindings title
> >>>
> >>> Changes in v2:
> >>> - add supported PHY modes
> >>> - change to dual license
> >>>
> >>>  .../bindings/net/nvidia,tegra234-mgbe.yaml    | 169 ++++++++++++++++++
> >>>  1 file changed, 169 insertions(+)
> >>>  create mode 100644 Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
> >>>
> >>
> >> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> >> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >>
> >> yamllint warnings/errors:
> >>
> >> dtschema/dtc warnings/errors:
> >> Error: Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.example.dts:53.34-35 syntax error
> >> FATAL ERROR: Unable to parse input tree
> > 
> > This is an error that you'd get if patch 3 is not applied. Not sure if I
> > managed to confuse the bot somehow, but I cannot reproduce this if I
> > apply the series on top of v5.19-rc1 or linux-next.
> 
> Patch number 3 does not apply on v5.19-rc1 or linux-next, so maybe the
> bot (which applies on rc1) did not have it.

Good point. I'll rebase v4 on top of v5.19-rc1 then. This shouldn't
cause a problem for net-next because there's no conflict there for patch
9.

I did notice that the devicetree-bindings patchwork instance doesn't
have all of the patches, so perhaps that tripped up the bot as well. Not
sure what happened there, the linux-tegra instance has all 9 patches.

Thierry
Thierry Reding July 7, 2022, 7:45 a.m. UTC | #6
On Thu, Jul 07, 2022 at 08:56:49AM +0200, Krzysztof Kozlowski wrote:
> On 06/07/2022 23:32, Thierry Reding wrote:
[...]
> > +        - mac
> > +        - pcs
> > +
> > +  interconnects:
> > +    items:
> > +      - description: memory read client
> > +      - description: memory write client
> > +
> > +  interconnect-names:
> > +    items:
> > +      - const: dma-mem # read
> 
> I propose to drop the comment - it is obvious from "interconnects" above.

Yeah, fair enough. I've addressed all of the other comments in v4 as
well.

Thanks for the review!
Thierry
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
new file mode 100644
index 000000000000..3d242ef1ca57
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
@@ -0,0 +1,169 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nvidia,tegra234-mgbe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra234 MGBE Multi-Gigabit Ethernet Controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+
+  compatible:
+    const: nvidia,tegra234-mgbe
+
+  reg:
+    minItems: 3
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: hypervisor
+      - const: mac
+      - const: xpcs
+
+  interrupts:
+    minItems: 1
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: common
+      - const: macsec-ns
+      - const: macsec
+
+  clocks:
+    minItems: 12
+    maxItems: 12
+
+  clock-names:
+    minItems: 12
+    maxItems: 12
+    contains:
+      enum:
+        - mgbe
+        - mac
+        - mac-divider
+        - ptp-ref
+        - rx-input-m
+        - rx-input
+        - tx
+        - eee-pcs
+        - rx-pcs-input
+        - rx-pcs-m
+        - rx-pcs
+        - tx-pcs
+
+  resets:
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    contains:
+      enum:
+        - mac
+        - pcs
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  phy-handle: true
+
+  phy-mode:
+    contains:
+      enum:
+        - usxgmii
+        - 10gbase-kr
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Optional node for embedded MDIO controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - phy-handle
+  - phy-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    ethernet@6800000 {
+        compatible = "nvidia,tegra234-mgbe";
+        reg = <0x06800000 0x10000>,
+              <0x06810000 0x10000>,
+              <0x068a0000 0x10000>;
+        reg-names = "hypervisor", "mac", "xpcs";
+        interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "common";
+        clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>,
+                 <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX>,
+                 <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
+        clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+                      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+                      "rx-pcs", "tx-pcs";
+        resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
+                 <&bpmp TEGRA234_RESET_MGBE0_PCS>;
+        reset-names = "mac", "pcs";
+        interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>,
+                        <&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
+        power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+
+        phy-handle = <&mgbe0_phy>;
+        phy-mode = "usxgmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mgbe0_phy: phy@0 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <0x0>;
+
+                #phy-cells = <0>;
+            };
+        };
+    };