| Message ID | 20220727164130.385411-2-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Awaiting Upstream |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [1/2] dt-bindings: nfc: use spi-peripheral-props.yaml | expand |
| Context | Check | Description |
|---|---|---|
| netdev/tree_selection | success | Not a local patch |
On Wed, 27 Jul 2022 18:41:30 +0200, Krzysztof Kozlowski wrote: > Instead of listing directly properties typical for SPI peripherals, > reference the spi-peripheral-props.yaml schema. This allows using all > properties typical for SPI-connected devices, even these which device > bindings author did not tried yet. > > Remove the spi-* properties which now come via spi-peripheral-props.yaml > schema, except for the cases when device schema adds some constraints > like maximum frequency. > > While changing additionalProperties->unevaluatedProperties, put it in > typical place, just before example DTS. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Technically, this depends on [1] merged to SPI tree, if we want to > preserve existing behavior of not allowing SPI CPHA and CPOL in each of > schemas in this patch. > > If this patch comes independently via different tree, the SPI CPHA and > CPOL will be allowed for brief period of time, before [1] is merged. > This will not have negative impact, just DT schema checks will be > loosened for that period. > > [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/ > --- > .../net/wireless/microchip,wilc1000.yaml | 7 ++-- > .../bindings/net/wireless/silabs,wfx.yaml | 15 +++------ > .../bindings/net/wireless/ti,wlcore.yaml | 32 +++++++++---------- > 3 files changed, 25 insertions(+), 29 deletions(-) > Acked-by: Rob Herring <robh@kernel.org>
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > Instead of listing directly properties typical for SPI peripherals, > reference the spi-peripheral-props.yaml schema. This allows using all > properties typical for SPI-connected devices, even these which device > bindings author did not tried yet. > > Remove the spi-* properties which now come via spi-peripheral-props.yaml > schema, except for the cases when device schema adds some constraints > like maximum frequency. > > While changing additionalProperties->unevaluatedProperties, put it in > typical place, just before example DTS. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > Acked-by: Rob Herring <robh@kernel.org> Patch applied to wireless-next.git, thanks. 15273b7b8b4f dt-bindings: wireless: use spi-peripheral-props.yaml
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml index 60de78f1bc7b..b3405f284580 100644 --- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -20,8 +20,6 @@ properties: reg: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -51,7 +49,10 @@ required: - compatible - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml index 76199a67d628..b35d2f3ad1ad 100644 --- a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -29,12 +29,6 @@ description: > Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more information. - For SPI: - - In add of the properties below, please consult - Documentation/devicetree/bindings/spi/spi-controller.yaml for optional SPI - related properties. - properties: compatible: items: @@ -52,8 +46,6 @@ properties: bindings. maxItems: 1 - spi-max-frequency: true - interrupts: description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is used, this property is required. When SDIO is used, the "in-band" @@ -84,12 +76,15 @@ properties: mac-address: true -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index d68bb2ec1f7e..e31456730e9f 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -36,8 +36,6 @@ properties: This is required when connected via SPI, and optional when connected via SDIO. - spi-max-frequency: true - interrupts: minItems: 1 maxItems: 2 @@ -69,20 +67,22 @@ required: - compatible - interrupts -if: - properties: - compatible: - contains: - enum: - - ti,wl1271 - - ti,wl1273 - - ti,wl1281 - - ti,wl1283 -then: - required: - - ref-clock-frequency - -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,wl1271 + - ti,wl1273 + - ti,wl1281 + - ti,wl1283 + then: + required: + - ref-clock-frequency + +unevaluatedProperties: false examples: - |
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Technically, this depends on [1] merged to SPI tree, if we want to preserve existing behavior of not allowing SPI CPHA and CPOL in each of schemas in this patch. If this patch comes independently via different tree, the SPI CPHA and CPOL will be allowed for brief period of time, before [1] is merged. This will not have negative impact, just DT schema checks will be loosened for that period. [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/ --- .../net/wireless/microchip,wilc1000.yaml | 7 ++-- .../bindings/net/wireless/silabs,wfx.yaml | 15 +++------ .../bindings/net/wireless/ti,wlcore.yaml | 32 +++++++++---------- 3 files changed, 25 insertions(+), 29 deletions(-)