new file mode 100644
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin1110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADI ADIN1110 MAC-PHY
+
+maintainers:
+ - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+ The ADIN1110 is a low power single port 10BASE-T1L MAC-
+ PHY designed for industrial Ethernet applications. It integrates
+ an Ethernet PHY core with a MAC and all the associated analog
+ circuitry, input and output clock buffering.
+
+ The ADIN2111 is a low power, low complexity, two-Ethernet ports
+ switch with integrated 10BASE-T1L PHYs and one serial peripheral
+ interface (SPI) port. The device is designed for industrial Ethernet
+ applications using low power constrained nodes and is compliant
+ with the IEEE 802.3cg-2019 Ethernet standard for long reach
+ 10 Mbps single pair Ethernet (SPE).
+
+ The device has a 4-wire SPI interface for communication
+ between the MAC and host processor.
+
+allOf:
+ - $ref: ethernet-controller.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ enum:
+ - adi,adin1110
+ - adi,adin2111
+
+ reg:
+ maxItems: 1
+
+ adi,spi-crc:
+ description: |
+ Enable CRC8 checks on SPI read/writes.
+ type: boolean
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet@0 {
+ compatible = "adi,adin2111";
+ reg = <0>;
+ spi-max-frequency = <24500000>;
+
+ adi,spi-crc;
+
+ interrupt-parent = <&gpio>;
+ interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+
+ local-mac-address = [ 00 11 22 33 44 55 ];
+ };
+ };