@@ -8,6 +8,7 @@ struct lan966x_fdb_event_work {
struct work_struct work;
struct switchdev_notifier_fdb_info fdb_info;
struct net_device *dev;
+ struct net_device *orig_dev;
struct lan966x *lan966x;
unsigned long event;
};
@@ -127,75 +128,86 @@ void lan966x_fdb_deinit(struct lan966x *lan966x)
lan966x_fdb_purge_entries(lan966x);
}
-static void lan966x_fdb_event_work(struct work_struct *work)
+static void lan966x_fdb_port_event_work(struct lan966x_fdb_event_work *fdb_work)
{
- struct lan966x_fdb_event_work *fdb_work =
- container_of(work, struct lan966x_fdb_event_work, work);
struct switchdev_notifier_fdb_info *fdb_info;
- struct net_device *dev = fdb_work->dev;
struct lan966x_port *port;
struct lan966x *lan966x;
- int ret;
- fdb_info = &fdb_work->fdb_info;
lan966x = fdb_work->lan966x;
+ port = netdev_priv(fdb_work->orig_dev);
+ fdb_info = &fdb_work->fdb_info;
- if (lan966x_netdevice_check(dev)) {
- port = netdev_priv(dev);
-
- switch (fdb_work->event) {
- case SWITCHDEV_FDB_ADD_TO_DEVICE:
- if (!fdb_info->added_by_user)
- break;
- lan966x_mac_add_entry(lan966x, port, fdb_info->addr,
- fdb_info->vid);
+ switch (fdb_work->event) {
+ case SWITCHDEV_FDB_ADD_TO_DEVICE:
+ if (!fdb_info->added_by_user)
break;
- case SWITCHDEV_FDB_DEL_TO_DEVICE:
- if (!fdb_info->added_by_user)
- break;
- lan966x_mac_del_entry(lan966x, fdb_info->addr,
- fdb_info->vid);
+ lan966x_mac_add_entry(lan966x, port, fdb_info->addr,
+ fdb_info->vid);
+ break;
+ case SWITCHDEV_FDB_DEL_TO_DEVICE:
+ if (!fdb_info->added_by_user)
break;
- }
- } else {
- if (!netif_is_bridge_master(dev))
- goto out;
-
- /* In case the bridge is called */
- switch (fdb_work->event) {
- case SWITCHDEV_FDB_ADD_TO_DEVICE:
- /* If there is no front port in this vlan, there is no
- * point to copy the frame to CPU because it would be
- * just dropped at later point. So add it only if
- * there is a port but it is required to store the fdb
- * entry for later point when a port actually gets in
- * the vlan.
- */
- lan966x_fdb_add_entry(lan966x, fdb_info);
- if (!lan966x_vlan_cpu_member_cpu_vlan_mask(lan966x,
- fdb_info->vid))
- break;
-
- lan966x_mac_cpu_learn(lan966x, fdb_info->addr,
- fdb_info->vid);
+ lan966x_mac_del_entry(lan966x, fdb_info->addr,
+ fdb_info->vid);
+ break;
+ }
+}
+
+static void lan966x_fdb_bridge_event_work(struct lan966x_fdb_event_work *fdb_work)
+{
+ struct switchdev_notifier_fdb_info *fdb_info;
+ struct lan966x *lan966x;
+ int ret;
+
+ lan966x = fdb_work->lan966x;
+ fdb_info = &fdb_work->fdb_info;
+
+ /* In case the bridge is called */
+ switch (fdb_work->event) {
+ case SWITCHDEV_FDB_ADD_TO_DEVICE:
+ /* If there is no front port in this vlan, there is no
+ * point to copy the frame to CPU because it would be
+ * just dropped at later point. So add it only if
+ * there is a port but it is required to store the fdb
+ * entry for later point when a port actually gets in
+ * the vlan.
+ */
+ lan966x_fdb_add_entry(lan966x, fdb_info);
+ if (!lan966x_vlan_cpu_member_cpu_vlan_mask(lan966x,
+ fdb_info->vid))
break;
- case SWITCHDEV_FDB_DEL_TO_DEVICE:
- ret = lan966x_fdb_del_entry(lan966x, fdb_info);
- if (!lan966x_vlan_cpu_member_cpu_vlan_mask(lan966x,
- fdb_info->vid))
- break;
-
- if (ret)
- lan966x_mac_cpu_forget(lan966x, fdb_info->addr,
- fdb_info->vid);
+
+ lan966x_mac_cpu_learn(lan966x, fdb_info->addr,
+ fdb_info->vid);
+ break;
+ case SWITCHDEV_FDB_DEL_TO_DEVICE:
+ ret = lan966x_fdb_del_entry(lan966x, fdb_info);
+ if (!lan966x_vlan_cpu_member_cpu_vlan_mask(lan966x,
+ fdb_info->vid))
break;
- }
+
+ if (ret)
+ lan966x_mac_cpu_forget(lan966x, fdb_info->addr,
+ fdb_info->vid);
+ break;
}
+}
+
+static void lan966x_fdb_event_work(struct work_struct *work)
+{
+ struct lan966x_fdb_event_work *fdb_work =
+ container_of(work, struct lan966x_fdb_event_work, work);
+
+ if (lan966x_netdevice_check(fdb_work->orig_dev))
+ lan966x_fdb_port_event_work(fdb_work);
+ else if (netif_is_bridge_master(fdb_work->orig_dev))
+ lan966x_fdb_bridge_event_work(fdb_work);
-out:
kfree(fdb_work->fdb_info.addr);
+ dev_put(fdb_work->dev);
+ dev_put(fdb_work->orig_dev);
kfree(fdb_work);
- dev_put(dev);
}
int lan966x_handle_fdb(struct net_device *dev,
@@ -221,7 +233,8 @@ int lan966x_handle_fdb(struct net_device *dev,
if (!fdb_work)
return -ENOMEM;
- fdb_work->dev = orig_dev;
+ fdb_work->dev = dev;
+ fdb_work->orig_dev = orig_dev;
fdb_work->lan966x = lan966x;
fdb_work->event = event;
INIT_WORK(&fdb_work->work, lan966x_fdb_event_work);
@@ -231,6 +244,7 @@ int lan966x_handle_fdb(struct net_device *dev,
goto err_addr_alloc;
ether_addr_copy((u8 *)fdb_work->fdb_info.addr, fdb_info->addr);
+ dev_hold(dev);
dev_hold(orig_dev);
queue_work(lan966x->fdb_work, &fdb_work->work);
Split the function lan966x_fdb_event_work. One case for when the orig_dev is a bridge and one case when orig_dev is lan966x port. This is preparation for lag support. There is no functional change. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> --- .../ethernet/microchip/lan966x/lan966x_fdb.c | 124 ++++++++++-------- 1 file changed, 69 insertions(+), 55 deletions(-)