@@ -413,6 +413,29 @@ static const u8 lan937x_shifts[] = {
};
const struct ksz_chip_data ksz_switch_chips[] = {
+ [KSZ8563] = {
+ .chip_id = KSZ8563_CHIP_ID,
+ .dev_name = "KSZ8563",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x07, /* can be configured as cpu port */
+ .port_cnt = 3, /* total port count */
+ .ops = &ksz9477_dev_ops,
+ .mib_names = ksz9477_mib_names,
+ .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+ .reg_mib_cnt = MIB_COUNTER_NUM,
+ .regs = ksz9477_regs,
+ .masks = ksz9477_masks,
+ .shifts = ksz9477_shifts,
+ .xmii_ctrl0 = ksz9477_xmii_ctrl0,
+ .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
+ .supports_mii = {false, false, true},
+ .supports_rmii = {false, false, true},
+ .supports_rgmii = {false, false, true},
+ .internal_phy = {true, true, false},
+ },
+
[KSZ8795] = {
.chip_id = KSZ8795_CHIP_ID,
.dev_name = "KSZ8795",
@@ -1319,6 +1342,7 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
proto = DSA_TAG_PROTO_KSZ8795;
if (dev->chip_id == KSZ8830_CHIP_ID ||
+ dev->chip_id == KSZ8563_CHIP_ID ||
dev->chip_id == KSZ9893_CHIP_ID)
proto = DSA_TAG_PROTO_KSZ9893;
@@ -1638,7 +1662,7 @@ static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
static int ksz_switch_detect(struct ksz_device *dev)
{
- u8 id1, id2;
+ u8 id1, id2, id4;
u16 id16;
u32 id32;
int ret;
@@ -1684,7 +1708,6 @@ static int ksz_switch_detect(struct ksz_device *dev)
switch (id32) {
case KSZ9477_CHIP_ID:
case KSZ9897_CHIP_ID:
- case KSZ9893_CHIP_ID:
case KSZ9567_CHIP_ID:
case LAN9370_CHIP_ID:
case LAN9371_CHIP_ID:
@@ -1692,6 +1715,18 @@ static int ksz_switch_detect(struct ksz_device *dev)
case LAN9373_CHIP_ID:
case LAN9374_CHIP_ID:
dev->chip_id = id32;
+ break;
+ case KSZ9893_CHIP_ID:
+ ret = ksz_read8(dev, REG_CHIP_ID4,
+ &id4);
+ if (ret)
+ return ret;
+
+ if (id4 == SKU_ID_KSZ8563)
+ dev->chip_id = KSZ8563_CHIP_ID;
+ else
+ dev->chip_id = KSZ9893_CHIP_ID;
+
break;
default:
dev_err(dev->dev,
@@ -123,6 +123,7 @@ struct ksz_device {
/* List of supported models */
enum ksz_model {
+ KSZ8563,
KSZ8795,
KSZ8794,
KSZ8765,
@@ -139,6 +140,7 @@ enum ksz_model {
};
enum ksz_chip_id {
+ KSZ8563_CHIP_ID = 0x8563,
KSZ8795_CHIP_ID = 0x8795,
KSZ8794_CHIP_ID = 0x8794,
KSZ8765_CHIP_ID = 0x8765,
@@ -482,6 +484,10 @@ static inline int is_lan937x(struct ksz_device *dev)
#define SW_REV_ID_M GENMASK(7, 4)
+/* KSZ9893, KSZ9563, KSZ8563 specific register */
+#define REG_CHIP_ID4 0x0f
+#define SKU_ID_KSZ8563 0x3c
+
/* Driver set switch broadcast storm protection at 10% rate. */
#define BROADCAST_STORM_PROT_RATE 10
@@ -160,7 +160,7 @@ static const struct of_device_id ksz_dt_ids[] = {
},
{
.compatible = "microchip,ksz8563",
- .data = &ksz_switch_chips[KSZ9893]
+ .data = &ksz_switch_chips[KSZ8563]
},
{
.compatible = "microchip,ksz9567",
Add separate entry for the KSZ8563 chip. According to the documentation it can support Gbit only on RGMII port. So, we will need to be able to describe in the followup patch. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- drivers/net/dsa/microchip/ksz_common.c | 39 ++++++++++++++++++++++++-- drivers/net/dsa/microchip/ksz_common.h | 6 ++++ drivers/net/dsa/microchip/ksz_spi.c | 2 +- 3 files changed, 44 insertions(+), 3 deletions(-)