@@ -38,6 +38,7 @@ aliases {
spi1 = &blsp1_spi2;
i2c0 = &blsp1_i2c3;
i2c1 = &blsp1_i2c4;
+ ethernet0 = &gmac;
};
cpus {
@@ -590,6 +591,51 @@ wifi1: wifi@a800000 {
status = "disabled";
};
+ gmac: ethernet@c080000 {
+ compatible = "qcom,ipq4019-ess-edma";
+ reg = <0xc080000 0x8000>;
+ resets = <&gcc ESS_RESET>;
+ reset-names = "ess";
+ clocks = <&gcc GCC_ESS_CLK>;
+ clock-names = "ess";
+ interrupts = <GIC_SPI 65 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 69 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 71 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
+
+ status = "disabled";
+
+ phy-mode = "internal";
+ };
+
mdio: mdio@90000 {
#address-cells = <1>;
#size-cells = <0>;
The Qualcomm IPQ4019 includes an internal 5 ports switch, which is connected to the CPU through the internal IPQESS Ethernet controller. This commit adds support for this internal interface, which is internally connected to a modified version of the QCA8K Ethernet switch. This Ethernet controller only support a specific internal interface mode for connection to the switch. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- V2->V3: - No Changes V1->V2: - Added clock and resets arch/arm/boot/dts/qcom-ipq4019.dtsi | 46 +++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+)