From patchwork Mon Oct 17 12:18:26 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Arnd Bergmann X-Patchwork-Id: 13008797 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 425ACC4332F for ; Mon, 17 Oct 2022 12:20:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230120AbiJQMU5 (ORCPT ); Mon, 17 Oct 2022 08:20:57 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47690 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229774AbiJQMU4 (ORCPT ); Mon, 17 Oct 2022 08:20:56 -0400 Received: from ams.source.kernel.org (ams.source.kernel.org [IPv6:2604:1380:4601:e00::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 436C8D9B; Mon, 17 Oct 2022 05:20:28 -0700 (PDT) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 4FDF1B80F02; Mon, 17 Oct 2022 12:19:11 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 59263C433C1; Mon, 17 Oct 2022 12:19:07 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1666009149; bh=QKQ8L4ue+bO7I/2cJGM7q+jzP6SAWuBM2nRTPhsMzKQ=; h=From:To:Cc:Subject:Date:From; b=sVazPPU7t6d/eLtk3LM6lSmd1HGsMb6Y6HLiEq6UA1qG9ZxQVuRiIzFsRMA7zx1rb 83V7HQpGttC/9Vtwt/fRyJNZLQh9+pctuquPVaF4T6jiVaiJN6dqXmhZTdfZVPH52i tQUeZfTo2EfV0fCqscY/Z15+wwNzEnuLoZ4h4KW0/jnpo8rio+TMxxhgza3z+Y0XD4 ps1qzEv6NJAWMDeX5n+po4UVhgNmOxt5e1xCWyzKXJtvivPXEFuhGlsxKmBGFSgr6M JmdDEWMe5AFrah7hxjWYMmpzeEYtdL3Hqs1aguy0+hHBW6X+NCiTqQEZTCh2qUF2lu nqXZQvwTdIllQ== From: Arnd Bergmann To: "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni Cc: steve.glendinning@shawell.net, Arnd Bergmann , linux-kernel@vger.kernel.org, netdev@vger.kernel.org Subject: [PATCH] net: remove smc911x driver Date: Mon, 17 Oct 2022 14:18:26 +0200 Message-Id: <20221017121900.3520108-1-arnd@kernel.org> X-Mailer: git-send-email 2.29.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org From: Arnd Bergmann This driver was used on Arm and SH machines until 2009, when the last platforms moved to the smsc911x driver for the same hardware. Time to retire this version. Link: https://lore.kernel.org/netdev/1232010482-3744-1-git-send-email-steve.glendinning@smsc.com/ Signed-off-by: Arnd Bergmann --- drivers/net/ethernet/smsc/Kconfig | 14 - drivers/net/ethernet/smsc/Makefile | 1 - drivers/net/ethernet/smsc/smc911x.c | 2198 --------------------------- drivers/net/ethernet/smsc/smc911x.h | 901 ----------- include/linux/smc911x.h | 14 - 5 files changed, 3128 deletions(-) delete mode 100644 drivers/net/ethernet/smsc/smc911x.c delete mode 100644 drivers/net/ethernet/smsc/smc911x.h delete mode 100644 include/linux/smc911x.h diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig index 2524c907f386..5f22a8a4d27b 100644 --- a/drivers/net/ethernet/smsc/Kconfig +++ b/drivers/net/ethernet/smsc/Kconfig @@ -75,20 +75,6 @@ config EPIC100 More specific information and updates are available from . -config SMC911X - tristate "SMSC LAN911[5678] support" - select CRC32 - select MII - depends on (ARM || SUPERH || COMPILE_TEST) - help - This is a driver for SMSC's LAN911x series of Ethernet chipsets - including the new LAN9115, LAN9116, LAN9117, and LAN9118. - Say Y here if you want it compiled into the kernel. - - This driver is also available as a module. The module will be - called smc911x. If you want to compile it as a module, say M - here and read - config SMSC911X tristate "SMSC LAN911x/LAN921x families embedded ethernet support" depends on HAS_IOMEM diff --git a/drivers/net/ethernet/smsc/Makefile b/drivers/net/ethernet/smsc/Makefile index 4105912b1629..1501fa364c13 100644 --- a/drivers/net/ethernet/smsc/Makefile +++ b/drivers/net/ethernet/smsc/Makefile @@ -8,5 +8,4 @@ obj-$(CONFIG_SMC91X) += smc91x.o obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o obj-$(CONFIG_EPIC100) += epic100.o obj-$(CONFIG_SMSC9420) += smsc9420.o -obj-$(CONFIG_SMC911X) += smc911x.o obj-$(CONFIG_SMSC911X) += smsc911x.o diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c deleted file mode 100644 index 52ecfb461c41..000000000000 --- a/drivers/net/ethernet/smsc/smc911x.c +++ /dev/null @@ -1,2198 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * smc911x.c - * This is a driver for SMSC's LAN911{5,6,7,8} single-chip Ethernet devices. - * - * Copyright (C) 2005 Sensoria Corp - * Derived from the unified SMC91x driver by Nicolas Pitre - * and the smsc911x.c reference driver by SMSC - * - * Arguments: - * watchdog = TX watchdog timeout - * tx_fifo_kb = Size of TX FIFO in KB - * - * History: - * 04/16/05 Dustin McIntire Initial version - */ -static const char version[] = - "smc911x.c: v1.0 04-16-2005 by Dustin McIntire \n"; - -/* Debugging options */ -#define ENABLE_SMC_DEBUG_RX 0 -#define ENABLE_SMC_DEBUG_TX 0 -#define ENABLE_SMC_DEBUG_DMA 0 -#define ENABLE_SMC_DEBUG_PKTS 0 -#define ENABLE_SMC_DEBUG_MISC 0 -#define ENABLE_SMC_DEBUG_FUNC 0 - -#define SMC_DEBUG_RX ((ENABLE_SMC_DEBUG_RX ? 1 : 0) << 0) -#define SMC_DEBUG_TX ((ENABLE_SMC_DEBUG_TX ? 1 : 0) << 1) -#define SMC_DEBUG_DMA ((ENABLE_SMC_DEBUG_DMA ? 1 : 0) << 2) -#define SMC_DEBUG_PKTS ((ENABLE_SMC_DEBUG_PKTS ? 1 : 0) << 3) -#define SMC_DEBUG_MISC ((ENABLE_SMC_DEBUG_MISC ? 1 : 0) << 4) -#define SMC_DEBUG_FUNC ((ENABLE_SMC_DEBUG_FUNC ? 1 : 0) << 5) - -#ifndef SMC_DEBUG -#define SMC_DEBUG ( SMC_DEBUG_RX | \ - SMC_DEBUG_TX | \ - SMC_DEBUG_DMA | \ - SMC_DEBUG_PKTS | \ - SMC_DEBUG_MISC | \ - SMC_DEBUG_FUNC \ - ) -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include - -#include "smc911x.h" - -/* - * Transmit timeout, default 5 seconds. - */ -static int watchdog = 5000; -module_param(watchdog, int, 0400); -MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); - -static int tx_fifo_kb=8; -module_param(tx_fifo_kb, int, 0400); -MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1 0 -#define DBG(n, dev, args...) \ - do { \ - if (SMC_DEBUG & (n)) \ - netdev_dbg(dev, args); \ - } while (0) - -#define PRINTK(dev, args...) netdev_info(dev, args) -#else -#define DBG(n, dev, args...) \ - while (0) { \ - netdev_dbg(dev, args); \ - } -#define PRINTK(dev, args...) netdev_dbg(dev, args) -#endif - -#if SMC_DEBUG_PKTS > 0 -static void PRINT_PKT(u_char *buf, int length) -{ - int i; - int remainder; - int lines; - - lines = length / 16; - remainder = length % 16; - - for (i = 0; i < lines ; i ++) { - int cur; - printk(KERN_DEBUG); - for (cur = 0; cur < 8; cur++) { - u_char a, b; - a = *buf++; - b = *buf++; - pr_cont("%02x%02x ", a, b); - } - pr_cont("\n"); - } - printk(KERN_DEBUG); - for (i = 0; i < remainder/2 ; i++) { - u_char a, b; - a = *buf++; - b = *buf++; - pr_cont("%02x%02x ", a, b); - } - pr_cont("\n"); -} -#else -static inline void PRINT_PKT(u_char *buf, int length) { } -#endif - - -/* this enables an interrupt in the interrupt mask register */ -#define SMC_ENABLE_INT(lp, x) do { \ - unsigned int __mask; \ - __mask = SMC_GET_INT_EN((lp)); \ - __mask |= (x); \ - SMC_SET_INT_EN((lp), __mask); \ -} while (0) - -/* this disables an interrupt from the interrupt mask register */ -#define SMC_DISABLE_INT(lp, x) do { \ - unsigned int __mask; \ - __mask = SMC_GET_INT_EN((lp)); \ - __mask &= ~(x); \ - SMC_SET_INT_EN((lp), __mask); \ -} while (0) - -/* - * this does a soft reset on the device - */ -static void smc911x_reset(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned int reg, timeout=0, resets=1, irq_cfg; - unsigned long flags; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - /* Take out of PM setting first */ - if ((SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_) == 0) { - /* Write to the bytetest will take out of powerdown */ - SMC_SET_BYTE_TEST(lp, 0); - timeout=10; - do { - udelay(10); - reg = SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_; - } while (--timeout && !reg); - if (timeout == 0) { - PRINTK(dev, "smc911x_reset timeout waiting for PM restore\n"); - return; - } - } - - /* Disable all interrupts */ - spin_lock_irqsave(&lp->lock, flags); - SMC_SET_INT_EN(lp, 0); - spin_unlock_irqrestore(&lp->lock, flags); - - while (resets--) { - SMC_SET_HW_CFG(lp, HW_CFG_SRST_); - timeout=10; - do { - udelay(10); - reg = SMC_GET_HW_CFG(lp); - /* If chip indicates reset timeout then try again */ - if (reg & HW_CFG_SRST_TO_) { - PRINTK(dev, "chip reset timeout, retrying...\n"); - resets++; - break; - } - } while (--timeout && (reg & HW_CFG_SRST_)); - } - if (timeout == 0) { - PRINTK(dev, "smc911x_reset timeout waiting for reset\n"); - return; - } - - /* make sure EEPROM has finished loading before setting GPIO_CFG */ - timeout=1000; - while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) - udelay(10); - - if (timeout == 0){ - PRINTK(dev, "smc911x_reset timeout waiting for EEPROM busy\n"); - return; - } - - /* Initialize interrupts */ - SMC_SET_INT_EN(lp, 0); - SMC_ACK_INT(lp, -1); - - /* Reset the FIFO level and flow control settings */ - SMC_SET_HW_CFG(lp, (lp->tx_fifo_kb & 0xF) << 16); -//TODO: Figure out what appropriate pause time is - SMC_SET_FLOW(lp, FLOW_FCPT_ | FLOW_FCEN_); - SMC_SET_AFC_CFG(lp, lp->afc_cfg); - - - /* Set to LED outputs */ - SMC_SET_GPIO_CFG(lp, 0x70070000); - - /* - * Deassert IRQ for 1*10us for edge type interrupts - * and drive IRQ pin push-pull - */ - irq_cfg = (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_; -#ifdef SMC_DYNAMIC_BUS_CONFIG - if (lp->cfg.irq_polarity) - irq_cfg |= INT_CFG_IRQ_POL_; -#endif - SMC_SET_IRQ_CFG(lp, irq_cfg); - - /* clear anything saved */ - if (lp->pending_tx_skb != NULL) { - dev_kfree_skb (lp->pending_tx_skb); - lp->pending_tx_skb = NULL; - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - } -} - -/* - * Enable Interrupts, Receive, and Transmit - */ -static void smc911x_enable(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned mask, cfg, cr; - unsigned long flags; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - spin_lock_irqsave(&lp->lock, flags); - - SMC_SET_MAC_ADDR(lp, dev->dev_addr); - - /* Enable TX */ - cfg = SMC_GET_HW_CFG(lp); - cfg &= HW_CFG_TX_FIF_SZ_ | 0xFFF; - cfg |= HW_CFG_SF_; - SMC_SET_HW_CFG(lp, cfg); - SMC_SET_FIFO_TDA(lp, 0xFF); - /* Update TX stats on every 64 packets received or every 1 sec */ - SMC_SET_FIFO_TSL(lp, 64); - SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000); - - SMC_GET_MAC_CR(lp, cr); - cr |= MAC_CR_TXEN_ | MAC_CR_HBDIS_; - SMC_SET_MAC_CR(lp, cr); - SMC_SET_TX_CFG(lp, TX_CFG_TX_ON_); - - /* Add 2 byte padding to start of packets */ - SMC_SET_RX_CFG(lp, (2<<8) & RX_CFG_RXDOFF_); - - /* Turn on receiver and enable RX */ - if (cr & MAC_CR_RXEN_) - DBG(SMC_DEBUG_RX, dev, "Receiver already enabled\n"); - - SMC_SET_MAC_CR(lp, cr | MAC_CR_RXEN_); - - /* Interrupt on every received packet */ - SMC_SET_FIFO_RSA(lp, 0x01); - SMC_SET_FIFO_RSL(lp, 0x00); - - /* now, enable interrupts */ - mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ | - INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ | - INT_EN_PHY_INT_EN_; - if (IS_REV_A(lp->revision)) - mask|=INT_EN_RDFL_EN_; - else { - mask|=INT_EN_RDFO_EN_; - } - SMC_ENABLE_INT(lp, mask); - - spin_unlock_irqrestore(&lp->lock, flags); -} - -/* - * this puts the device in an inactive state - */ -static void smc911x_shutdown(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned cr; - unsigned long flags; - - DBG(SMC_DEBUG_FUNC, dev, "%s: --> %s\n", CARDNAME, __func__); - - /* Disable IRQ's */ - SMC_SET_INT_EN(lp, 0); - - /* Turn of Rx and TX */ - spin_lock_irqsave(&lp->lock, flags); - SMC_GET_MAC_CR(lp, cr); - cr &= ~(MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); - SMC_SET_MAC_CR(lp, cr); - SMC_SET_TX_CFG(lp, TX_CFG_STOP_TX_); - spin_unlock_irqrestore(&lp->lock, flags); -} - -static inline void smc911x_drop_pkt(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned int fifo_count, timeout, reg; - - DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "%s: --> %s\n", - CARDNAME, __func__); - fifo_count = SMC_GET_RX_FIFO_INF(lp) & 0xFFFF; - if (fifo_count <= 4) { - /* Manually dump the packet data */ - while (fifo_count--) - SMC_GET_RX_FIFO(lp); - } else { - /* Fast forward through the bad packet */ - SMC_SET_RX_DP_CTRL(lp, RX_DP_CTRL_FFWD_BUSY_); - timeout=50; - do { - udelay(10); - reg = SMC_GET_RX_DP_CTRL(lp) & RX_DP_CTRL_FFWD_BUSY_; - } while (--timeout && reg); - if (timeout == 0) { - PRINTK(dev, "timeout waiting for RX fast forward\n"); - } - } -} - -/* - * This is the procedure to handle the receipt of a packet. - * It should be called after checking for packet presence in - * the RX status FIFO. It must be called with the spin lock - * already held. - */ -static inline void smc911x_rcv(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned int pkt_len, status; - struct sk_buff *skb; - unsigned char *data; - - DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, dev, "--> %s\n", - __func__); - status = SMC_GET_RX_STS_FIFO(lp); - DBG(SMC_DEBUG_RX, dev, "Rx pkt len %d status 0x%08x\n", - (status & 0x3fff0000) >> 16, status & 0xc000ffff); - pkt_len = (status & RX_STS_PKT_LEN_) >> 16; - if (status & RX_STS_ES_) { - /* Deal with a bad packet */ - dev->stats.rx_errors++; - if (status & RX_STS_CRC_ERR_) - dev->stats.rx_crc_errors++; - else { - if (status & RX_STS_LEN_ERR_) - dev->stats.rx_length_errors++; - if (status & RX_STS_MCAST_) - dev->stats.multicast++; - } - /* Remove the bad packet data from the RX FIFO */ - smc911x_drop_pkt(dev); - } else { - /* Receive a valid packet */ - /* Alloc a buffer with extra room for DMA alignment */ - skb = netdev_alloc_skb(dev, pkt_len+32); - if (unlikely(skb == NULL)) { - PRINTK(dev, "Low memory, rcvd packet dropped.\n"); - dev->stats.rx_dropped++; - smc911x_drop_pkt(dev); - return; - } - /* Align IP header to 32 bits - * Note that the device is configured to add a 2 - * byte padding to the packet start, so we really - * want to write to the orignal data pointer */ - data = skb->data; - skb_reserve(skb, 2); - skb_put(skb,pkt_len-4); -#ifdef SMC_USE_DMA - { - unsigned int fifo; - /* Lower the FIFO threshold if possible */ - fifo = SMC_GET_FIFO_INT(lp); - if (fifo & 0xFF) fifo--; - DBG(SMC_DEBUG_RX, dev, "Setting RX stat FIFO threshold to %d\n", - fifo & 0xff); - SMC_SET_FIFO_INT(lp, fifo); - /* Setup RX DMA */ - SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_)); - lp->rxdma_active = 1; - lp->current_rx_skb = skb; - SMC_PULL_DATA(lp, data, (pkt_len+2+15) & ~15); - /* Packet processing deferred to DMA RX interrupt */ - } -#else - SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_)); - SMC_PULL_DATA(lp, data, pkt_len+2+3); - - DBG(SMC_DEBUG_PKTS, dev, "Received packet\n"); - PRINT_PKT(data, min(pkt_len - 4, 64U)); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len-4; -#endif - } -} - -/* - * This is called to actually send a packet to the chip. - */ -static void smc911x_hardware_send_pkt(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - struct sk_buff *skb; - unsigned int cmdA, cmdB, len; - unsigned char *buf; - - DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n", __func__); - BUG_ON(lp->pending_tx_skb == NULL); - - skb = lp->pending_tx_skb; - lp->pending_tx_skb = NULL; - - /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */ - /* cmdB {31:16] pkt tag [10:0] length */ -#ifdef SMC_USE_DMA - /* 16 byte buffer alignment mode */ - buf = (char*)((u32)(skb->data) & ~0xF); - len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF; - cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) | - TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | - skb->len; -#else - buf = (char *)((uintptr_t)skb->data & ~0x3); - len = (skb->len + 3 + ((uintptr_t)skb->data & 3)) & ~0x3; - cmdA = (((uintptr_t)skb->data & 0x3) << 16) | - TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | - skb->len; -#endif - /* tag is packet length so we can use this in stats update later */ - cmdB = (skb->len << 16) | (skb->len & 0x7FF); - - DBG(SMC_DEBUG_TX, dev, "TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n", - len, len, buf, cmdA, cmdB); - SMC_SET_TX_FIFO(lp, cmdA); - SMC_SET_TX_FIFO(lp, cmdB); - - DBG(SMC_DEBUG_PKTS, dev, "Transmitted packet\n"); - PRINT_PKT(buf, min(len, 64U)); - - /* Send pkt via PIO or DMA */ -#ifdef SMC_USE_DMA - lp->current_tx_skb = skb; - SMC_PUSH_DATA(lp, buf, len); - /* DMA complete IRQ will free buffer and set jiffies */ -#else - SMC_PUSH_DATA(lp, buf, len); - netif_trans_update(dev); - dev_kfree_skb_irq(skb); -#endif - if (!lp->tx_throttle) { - netif_wake_queue(dev); - } - SMC_ENABLE_INT(lp, INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_); -} - -/* - * Since I am not sure if I will have enough room in the chip's ram - * to store the packet, I call this routine which either sends it - * now, or set the card to generates an interrupt when ready - * for the packet. - */ -static netdev_tx_t -smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned int free; - unsigned long flags; - - DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n", - __func__); - - spin_lock_irqsave(&lp->lock, flags); - - BUG_ON(lp->pending_tx_skb != NULL); - - free = SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TDFREE_; - DBG(SMC_DEBUG_TX, dev, "TX free space %d\n", free); - - /* Turn off the flow when running out of space in FIFO */ - if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) { - DBG(SMC_DEBUG_TX, dev, "Disabling data flow due to low FIFO space (%d)\n", - free); - /* Reenable when at least 1 packet of size MTU present */ - SMC_SET_FIFO_TDA(lp, (SMC911X_TX_FIFO_LOW_THRESHOLD)/64); - lp->tx_throttle = 1; - netif_stop_queue(dev); - } - - /* Drop packets when we run out of space in TX FIFO - * Account for overhead required for: - * - * Tx command words 8 bytes - * Start offset 15 bytes - * End padding 15 bytes - */ - if (unlikely(free < (skb->len + 8 + 15 + 15))) { - netdev_warn(dev, "No Tx free space %d < %d\n", - free, skb->len); - lp->pending_tx_skb = NULL; - dev->stats.tx_errors++; - dev->stats.tx_dropped++; - spin_unlock_irqrestore(&lp->lock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; - } - -#ifdef SMC_USE_DMA - { - /* If the DMA is already running then defer this packet Tx until - * the DMA IRQ starts it - */ - if (lp->txdma_active) { - DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Tx DMA running, deferring packet\n"); - lp->pending_tx_skb = skb; - netif_stop_queue(dev); - spin_unlock_irqrestore(&lp->lock, flags); - return NETDEV_TX_OK; - } else { - DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "Activating Tx DMA\n"); - lp->txdma_active = 1; - } - } -#endif - lp->pending_tx_skb = skb; - smc911x_hardware_send_pkt(dev); - spin_unlock_irqrestore(&lp->lock, flags); - - return NETDEV_TX_OK; -} - -/* - * This handles a TX status interrupt, which is only called when: - * - a TX error occurred, or - * - TX of a packet completed. - */ -static void smc911x_tx(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned int tx_status; - - DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, dev, "--> %s\n", - __func__); - - /* Collect the TX status */ - while (((SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16) != 0) { - DBG(SMC_DEBUG_TX, dev, "Tx stat FIFO used 0x%04x\n", - (SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16); - tx_status = SMC_GET_TX_STS_FIFO(lp); - dev->stats.tx_packets++; - dev->stats.tx_bytes+=tx_status>>16; - DBG(SMC_DEBUG_TX, dev, "Tx FIFO tag 0x%04x status 0x%04x\n", - (tx_status & 0xffff0000) >> 16, - tx_status & 0x0000ffff); - /* count Tx errors, but ignore lost carrier errors when in - * full-duplex mode */ - if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx && - !(tx_status & 0x00000306))) { - dev->stats.tx_errors++; - } - if (tx_status & TX_STS_MANY_COLL_) { - dev->stats.collisions+=16; - dev->stats.tx_aborted_errors++; - } else { - dev->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3; - } - /* carrier error only has meaning for half-duplex communication */ - if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) && - !lp->ctl_rfduplx) { - dev->stats.tx_carrier_errors++; - } - if (tx_status & TX_STS_LATE_COLL_) { - dev->stats.collisions++; - dev->stats.tx_aborted_errors++; - } - } -} - - -/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/ -/* - * Reads a register from the MII Management serial interface - */ - -static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned int phydata; - - SMC_GET_MII(lp, phyreg, phyaddr, phydata); - - DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n", - __func__, phyaddr, phyreg, phydata); - return phydata; -} - - -/* - * Writes a register to the MII Management serial interface - */ -static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg, - int phydata) -{ - struct smc911x_local *lp = netdev_priv(dev); - - DBG(SMC_DEBUG_MISC, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n", - __func__, phyaddr, phyreg, phydata); - - SMC_SET_MII(lp, phyreg, phyaddr, phydata); -} - -/* - * Finds and reports the PHY address (115 and 117 have external - * PHY interface 118 has internal only - */ -static void smc911x_phy_detect(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - int phyaddr; - unsigned int cfg, id1, id2; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - lp->phy_type = 0; - - /* - * Scan all 32 PHY addresses if necessary, starting at - * PHY#1 to PHY#31, and then PHY#0 last. - */ - switch(lp->version) { - case CHIP_9115: - case CHIP_9117: - case CHIP_9215: - case CHIP_9217: - cfg = SMC_GET_HW_CFG(lp); - if (cfg & HW_CFG_EXT_PHY_DET_) { - cfg &= ~HW_CFG_PHY_CLK_SEL_; - cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; - SMC_SET_HW_CFG(lp, cfg); - udelay(10); /* Wait for clocks to stop */ - - cfg |= HW_CFG_EXT_PHY_EN_; - SMC_SET_HW_CFG(lp, cfg); - udelay(10); /* Wait for clocks to stop */ - - cfg &= ~HW_CFG_PHY_CLK_SEL_; - cfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; - SMC_SET_HW_CFG(lp, cfg); - udelay(10); /* Wait for clocks to stop */ - - cfg |= HW_CFG_SMI_SEL_; - SMC_SET_HW_CFG(lp, cfg); - - for (phyaddr = 1; phyaddr < 32; ++phyaddr) { - - /* Read the PHY identifiers */ - SMC_GET_PHY_ID1(lp, phyaddr & 31, id1); - SMC_GET_PHY_ID2(lp, phyaddr & 31, id2); - - /* Make sure it is a valid identifier */ - if (id1 != 0x0000 && id1 != 0xffff && - id1 != 0x8000 && id2 != 0x0000 && - id2 != 0xffff && id2 != 0x8000) { - /* Save the PHY's address */ - lp->mii.phy_id = phyaddr & 31; - lp->phy_type = id1 << 16 | id2; - break; - } - } - if (phyaddr < 32) - /* Found an external PHY */ - break; - } - fallthrough; - default: - /* Internal media only */ - SMC_GET_PHY_ID1(lp, 1, id1); - SMC_GET_PHY_ID2(lp, 1, id2); - /* Save the PHY's address */ - lp->mii.phy_id = 1; - lp->phy_type = id1 << 16 | id2; - } - - DBG(SMC_DEBUG_MISC, dev, "phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%x\n", - id1, id2, lp->mii.phy_id); -} - -/* - * Sets the PHY to a configuration as determined by the user. - * Called with spin_lock held. - */ -static int smc911x_phy_fixed(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - int phyaddr = lp->mii.phy_id; - int bmcr; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - /* Enter Link Disable state */ - SMC_GET_PHY_BMCR(lp, phyaddr, bmcr); - bmcr |= BMCR_PDOWN; - SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); - - /* - * Set our fixed capabilities - * Disable auto-negotiation - */ - bmcr &= ~BMCR_ANENABLE; - if (lp->ctl_rfduplx) - bmcr |= BMCR_FULLDPLX; - - if (lp->ctl_rspeed == 100) - bmcr |= BMCR_SPEED100; - - /* Write our capabilities to the phy control register */ - SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); - - /* Re-Configure the Receive/Phy Control register */ - bmcr &= ~BMCR_PDOWN; - SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); - - return 1; -} - -/** - * smc911x_phy_reset - reset the phy - * @dev: net device - * @phy: phy address - * - * Issue a software reset for the specified PHY and - * wait up to 100ms for the reset to complete. We should - * not access the PHY for 50ms after issuing the reset. - * - * The time to wait appears to be dependent on the PHY. - * - */ -static int smc911x_phy_reset(struct net_device *dev, int phy) -{ - struct smc911x_local *lp = netdev_priv(dev); - int timeout; - unsigned long flags; - unsigned int reg; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__); - - spin_lock_irqsave(&lp->lock, flags); - reg = SMC_GET_PMT_CTRL(lp); - reg &= ~0xfffff030; - reg |= PMT_CTRL_PHY_RST_; - SMC_SET_PMT_CTRL(lp, reg); - spin_unlock_irqrestore(&lp->lock, flags); - for (timeout = 2; timeout; timeout--) { - msleep(50); - spin_lock_irqsave(&lp->lock, flags); - reg = SMC_GET_PMT_CTRL(lp); - spin_unlock_irqrestore(&lp->lock, flags); - if (!(reg & PMT_CTRL_PHY_RST_)) { - /* extra delay required because the phy may - * not be completed with its reset - * when PHY_BCR_RESET_ is cleared. 256us - * should suffice, but use 500us to be safe - */ - udelay(500); - break; - } - } - - return reg & PMT_CTRL_PHY_RST_; -} - -/** - * smc911x_phy_powerdown - powerdown phy - * @dev: net device - * @phy: phy address - * - * Power down the specified PHY - */ -static void smc911x_phy_powerdown(struct net_device *dev, int phy) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned int bmcr; - - /* Enter Link Disable state */ - SMC_GET_PHY_BMCR(lp, phy, bmcr); - bmcr |= BMCR_PDOWN; - SMC_SET_PHY_BMCR(lp, phy, bmcr); -} - -/** - * smc911x_phy_check_media - check the media status and adjust BMCR - * @dev: net device - * @init: set true for initialisation - * - * Select duplex mode depending on negotiation state. This - * also updates our carrier state. - */ -static void smc911x_phy_check_media(struct net_device *dev, int init) -{ - struct smc911x_local *lp = netdev_priv(dev); - int phyaddr = lp->mii.phy_id; - unsigned int bmcr, cr; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) { - /* duplex state has changed */ - SMC_GET_PHY_BMCR(lp, phyaddr, bmcr); - SMC_GET_MAC_CR(lp, cr); - if (lp->mii.full_duplex) { - DBG(SMC_DEBUG_MISC, dev, "Configuring for full-duplex mode\n"); - bmcr |= BMCR_FULLDPLX; - cr |= MAC_CR_RCVOWN_; - } else { - DBG(SMC_DEBUG_MISC, dev, "Configuring for half-duplex mode\n"); - bmcr &= ~BMCR_FULLDPLX; - cr &= ~MAC_CR_RCVOWN_; - } - SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); - SMC_SET_MAC_CR(lp, cr); - } -} - -/* - * Configures the specified PHY through the MII management interface - * using Autonegotiation. - * Calls smc911x_phy_fixed() if the user has requested a certain config. - * If RPC ANEG bit is set, the media selection is dependent purely on - * the selection by the MII (either in the MII BMCR reg or the result - * of autonegotiation.) If the RPC ANEG bit is cleared, the selection - * is controlled by the RPC SPEED and RPC DPLX bits. - */ -static void smc911x_phy_configure(struct work_struct *work) -{ - struct smc911x_local *lp = container_of(work, struct smc911x_local, - phy_configure); - struct net_device *dev = lp->netdev; - int phyaddr = lp->mii.phy_id; - int my_phy_caps; /* My PHY capabilities */ - int my_ad_caps; /* My Advertised capabilities */ - int status __always_unused; - unsigned long flags; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s()\n", __func__); - - /* - * We should not be called if phy_type is zero. - */ - if (lp->phy_type == 0) - return; - - if (smc911x_phy_reset(dev, phyaddr)) { - netdev_info(dev, "PHY reset timed out\n"); - return; - } - spin_lock_irqsave(&lp->lock, flags); - - /* - * Enable PHY Interrupts (for register 18) - * Interrupts listed here are enabled - */ - SMC_SET_PHY_INT_MASK(lp, phyaddr, PHY_INT_MASK_ENERGY_ON_ | - PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_REMOTE_FAULT_ | - PHY_INT_MASK_LINK_DOWN_); - - /* If the user requested no auto neg, then go set his request */ - if (lp->mii.force_media) { - smc911x_phy_fixed(dev); - goto smc911x_phy_configure_exit; - } - - /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */ - SMC_GET_PHY_BMSR(lp, phyaddr, my_phy_caps); - if (!(my_phy_caps & BMSR_ANEGCAPABLE)) { - netdev_info(dev, "Auto negotiation NOT supported\n"); - smc911x_phy_fixed(dev); - goto smc911x_phy_configure_exit; - } - - /* CSMA capable w/ both pauses */ - my_ad_caps = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; - - if (my_phy_caps & BMSR_100BASE4) - my_ad_caps |= ADVERTISE_100BASE4; - if (my_phy_caps & BMSR_100FULL) - my_ad_caps |= ADVERTISE_100FULL; - if (my_phy_caps & BMSR_100HALF) - my_ad_caps |= ADVERTISE_100HALF; - if (my_phy_caps & BMSR_10FULL) - my_ad_caps |= ADVERTISE_10FULL; - if (my_phy_caps & BMSR_10HALF) - my_ad_caps |= ADVERTISE_10HALF; - - /* Disable capabilities not selected by our user */ - if (lp->ctl_rspeed != 100) - my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF); - - if (!lp->ctl_rfduplx) - my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL); - - /* Update our Auto-Neg Advertisement Register */ - SMC_SET_PHY_MII_ADV(lp, phyaddr, my_ad_caps); - lp->mii.advertising = my_ad_caps; - - /* - * Read the register back. Without this, it appears that when - * auto-negotiation is restarted, sometimes it isn't ready and - * the link does not come up. - */ - udelay(10); - SMC_GET_PHY_MII_ADV(lp, phyaddr, status); - - DBG(SMC_DEBUG_MISC, dev, "phy caps=0x%04x\n", my_phy_caps); - DBG(SMC_DEBUG_MISC, dev, "phy advertised caps=0x%04x\n", my_ad_caps); - - /* Restart auto-negotiation process in order to advertise my caps */ - SMC_SET_PHY_BMCR(lp, phyaddr, BMCR_ANENABLE | BMCR_ANRESTART); - - smc911x_phy_check_media(dev, 1); - -smc911x_phy_configure_exit: - spin_unlock_irqrestore(&lp->lock, flags); -} - -/* - * smc911x_phy_interrupt - * - * Purpose: Handle interrupts relating to PHY register 18. This is - * called from the "hard" interrupt handler under our private spinlock. - */ -static void smc911x_phy_interrupt(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - int phyaddr = lp->mii.phy_id; - int status __always_unused; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - if (lp->phy_type == 0) - return; - - smc911x_phy_check_media(dev, 0); - /* read to clear status bits */ - SMC_GET_PHY_INT_SRC(lp, phyaddr,status); - DBG(SMC_DEBUG_MISC, dev, "PHY interrupt status 0x%04x\n", - status & 0xffff); - DBG(SMC_DEBUG_MISC, dev, "AFC_CFG 0x%08x\n", - SMC_GET_AFC_CFG(lp)); -} - -/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/ - -/* - * This is the main routine of the driver, to handle the device when - * it needs some attention. - */ -static irqreturn_t smc911x_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct smc911x_local *lp = netdev_priv(dev); - unsigned int status, mask, timeout; - unsigned int rx_overrun=0, cr, pkts; - unsigned long flags; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - spin_lock_irqsave(&lp->lock, flags); - - /* Spurious interrupt check */ - if ((SMC_GET_IRQ_CFG(lp) & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) != - (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) { - spin_unlock_irqrestore(&lp->lock, flags); - return IRQ_NONE; - } - - mask = SMC_GET_INT_EN(lp); - SMC_SET_INT_EN(lp, 0); - - /* set a timeout value, so I don't stay here forever */ - timeout = 8; - - - do { - status = SMC_GET_INT(lp); - - DBG(SMC_DEBUG_MISC, dev, "INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n", - status, mask, status & ~mask); - - status &= mask; - if (!status) - break; - - /* Handle SW interrupt condition */ - if (status & INT_STS_SW_INT_) { - SMC_ACK_INT(lp, INT_STS_SW_INT_); - mask &= ~INT_EN_SW_INT_EN_; - } - /* Handle various error conditions */ - if (status & INT_STS_RXE_) { - SMC_ACK_INT(lp, INT_STS_RXE_); - dev->stats.rx_errors++; - } - if (status & INT_STS_RXDFH_INT_) { - SMC_ACK_INT(lp, INT_STS_RXDFH_INT_); - dev->stats.rx_dropped+=SMC_GET_RX_DROP(lp); - } - /* Undocumented interrupt-what is the right thing to do here? */ - if (status & INT_STS_RXDF_INT_) { - SMC_ACK_INT(lp, INT_STS_RXDF_INT_); - } - - /* Rx Data FIFO exceeds set level */ - if (status & INT_STS_RDFL_) { - if (IS_REV_A(lp->revision)) { - rx_overrun=1; - SMC_GET_MAC_CR(lp, cr); - cr &= ~MAC_CR_RXEN_; - SMC_SET_MAC_CR(lp, cr); - DBG(SMC_DEBUG_RX, dev, "RX overrun\n"); - dev->stats.rx_errors++; - dev->stats.rx_fifo_errors++; - } - SMC_ACK_INT(lp, INT_STS_RDFL_); - } - if (status & INT_STS_RDFO_) { - if (!IS_REV_A(lp->revision)) { - SMC_GET_MAC_CR(lp, cr); - cr &= ~MAC_CR_RXEN_; - SMC_SET_MAC_CR(lp, cr); - rx_overrun=1; - DBG(SMC_DEBUG_RX, dev, "RX overrun\n"); - dev->stats.rx_errors++; - dev->stats.rx_fifo_errors++; - } - SMC_ACK_INT(lp, INT_STS_RDFO_); - } - /* Handle receive condition */ - if ((status & INT_STS_RSFL_) || rx_overrun) { - unsigned int fifo; - DBG(SMC_DEBUG_RX, dev, "RX irq\n"); - fifo = SMC_GET_RX_FIFO_INF(lp); - pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16; - DBG(SMC_DEBUG_RX, dev, "Rx FIFO pkts %d, bytes %d\n", - pkts, fifo & 0xFFFF); - if (pkts != 0) { -#ifdef SMC_USE_DMA - unsigned int fifo; - if (lp->rxdma_active){ - DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, - "RX DMA active\n"); - /* The DMA is already running so up the IRQ threshold */ - fifo = SMC_GET_FIFO_INT(lp) & ~0xFF; - fifo |= pkts & 0xFF; - DBG(SMC_DEBUG_RX, dev, - "Setting RX stat FIFO threshold to %d\n", - fifo & 0xff); - SMC_SET_FIFO_INT(lp, fifo); - } else -#endif - smc911x_rcv(dev); - } - SMC_ACK_INT(lp, INT_STS_RSFL_); - } - /* Handle transmit FIFO available */ - if (status & INT_STS_TDFA_) { - DBG(SMC_DEBUG_TX, dev, "TX data FIFO space available irq\n"); - SMC_SET_FIFO_TDA(lp, 0xFF); - lp->tx_throttle = 0; -#ifdef SMC_USE_DMA - if (!lp->txdma_active) -#endif - netif_wake_queue(dev); - SMC_ACK_INT(lp, INT_STS_TDFA_); - } - /* Handle transmit done condition */ -#if 1 - if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) { - DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, dev, - "Tx stat FIFO limit (%d) /GPT irq\n", - (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16); - smc911x_tx(dev); - SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000); - SMC_ACK_INT(lp, INT_STS_TSFL_); - SMC_ACK_INT(lp, INT_STS_TSFL_ | INT_STS_GPT_INT_); - } -#else - if (status & INT_STS_TSFL_) { - DBG(SMC_DEBUG_TX, dev, "TX status FIFO limit (%d) irq\n", ?); - smc911x_tx(dev); - SMC_ACK_INT(lp, INT_STS_TSFL_); - } - - if (status & INT_STS_GPT_INT_) { - DBG(SMC_DEBUG_RX, dev, "IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n", - SMC_GET_IRQ_CFG(lp), - SMC_GET_FIFO_INT(lp), - SMC_GET_RX_CFG(lp)); - DBG(SMC_DEBUG_RX, dev, "Rx Stat FIFO Used 0x%02x Data FIFO Used 0x%04x Stat FIFO 0x%08x\n", - (SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16, - SMC_GET_RX_FIFO_INF(lp) & 0xffff, - SMC_GET_RX_STS_FIFO_PEEK(lp)); - SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000); - SMC_ACK_INT(lp, INT_STS_GPT_INT_); - } -#endif - - /* Handle PHY interrupt condition */ - if (status & INT_STS_PHY_INT_) { - DBG(SMC_DEBUG_MISC, dev, "PHY irq\n"); - smc911x_phy_interrupt(dev); - SMC_ACK_INT(lp, INT_STS_PHY_INT_); - } - } while (--timeout); - - /* restore mask state */ - SMC_SET_INT_EN(lp, mask); - - DBG(SMC_DEBUG_MISC, dev, "Interrupt done (%d loops)\n", - 8-timeout); - - spin_unlock_irqrestore(&lp->lock, flags); - - return IRQ_HANDLED; -} - -#ifdef SMC_USE_DMA -static void -smc911x_tx_dma_irq(void *data) -{ - struct smc911x_local *lp = data; - struct net_device *dev = lp->netdev; - struct sk_buff *skb = lp->current_tx_skb; - unsigned long flags; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, "TX DMA irq handler\n"); - BUG_ON(skb == NULL); - dma_unmap_single(lp->dev, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE); - netif_trans_update(dev); - dev_kfree_skb_irq(skb); - lp->current_tx_skb = NULL; - if (lp->pending_tx_skb != NULL) - smc911x_hardware_send_pkt(dev); - else { - DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, - "No pending Tx packets. DMA disabled\n"); - spin_lock_irqsave(&lp->lock, flags); - lp->txdma_active = 0; - if (!lp->tx_throttle) { - netif_wake_queue(dev); - } - spin_unlock_irqrestore(&lp->lock, flags); - } - - DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, dev, - "TX DMA irq completed\n"); -} -static void -smc911x_rx_dma_irq(void *data) -{ - struct smc911x_local *lp = data; - struct net_device *dev = lp->netdev; - struct sk_buff *skb = lp->current_rx_skb; - unsigned long flags; - unsigned int pkts; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, "RX DMA irq handler\n"); - dma_unmap_single(lp->dev, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE); - BUG_ON(skb == NULL); - lp->current_rx_skb = NULL; - PRINT_PKT(skb->data, skb->len); - skb->protocol = eth_type_trans(skb, dev); - dev->stats.rx_packets++; - dev->stats.rx_bytes += skb->len; - netif_rx(skb); - - spin_lock_irqsave(&lp->lock, flags); - pkts = (SMC_GET_RX_FIFO_INF(lp) & RX_FIFO_INF_RXSUSED_) >> 16; - if (pkts != 0) { - smc911x_rcv(dev); - }else { - lp->rxdma_active = 0; - } - spin_unlock_irqrestore(&lp->lock, flags); - DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, dev, - "RX DMA irq completed. DMA RX FIFO PKTS %d\n", - pkts); -} -#endif /* SMC_USE_DMA */ - -#ifdef CONFIG_NET_POLL_CONTROLLER -/* - * Polling receive - used by netconsole and other diagnostic tools - * to allow network i/o with interrupts disabled. - */ -static void smc911x_poll_controller(struct net_device *dev) -{ - disable_irq(dev->irq); - smc911x_interrupt(dev->irq, dev); - enable_irq(dev->irq); -} -#endif - -/* Our watchdog timed out. Called by the networking layer */ -static void smc911x_timeout(struct net_device *dev, unsigned int txqueue) -{ - struct smc911x_local *lp = netdev_priv(dev); - int status, mask; - unsigned long flags; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - spin_lock_irqsave(&lp->lock, flags); - status = SMC_GET_INT(lp); - mask = SMC_GET_INT_EN(lp); - spin_unlock_irqrestore(&lp->lock, flags); - DBG(SMC_DEBUG_MISC, dev, "INT 0x%02x MASK 0x%02x\n", - status, mask); - - /* Dump the current TX FIFO contents and restart */ - mask = SMC_GET_TX_CFG(lp); - SMC_SET_TX_CFG(lp, mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_); - /* - * Reconfiguring the PHY doesn't seem like a bad idea here, but - * smc911x_phy_configure() calls msleep() which calls schedule_timeout() - * which calls schedule(). Hence we use a work queue. - */ - if (lp->phy_type != 0) - schedule_work(&lp->phy_configure); - - /* We can accept TX packets again */ - netif_trans_update(dev); /* prevent tx timeout */ - netif_wake_queue(dev); -} - -/* - * This routine will, depending on the values passed to it, - * either make it accept multicast packets, go into - * promiscuous mode (for TCPDUMP and cousins) or accept - * a select set of multicast packets - */ -static void smc911x_set_multicast_list(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned int multicast_table[2]; - unsigned int mcr, update_multicast = 0; - unsigned long flags; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - spin_lock_irqsave(&lp->lock, flags); - SMC_GET_MAC_CR(lp, mcr); - spin_unlock_irqrestore(&lp->lock, flags); - - if (dev->flags & IFF_PROMISC) { - - DBG(SMC_DEBUG_MISC, dev, "RCR_PRMS\n"); - mcr |= MAC_CR_PRMS_; - } - /* - * Here, I am setting this to accept all multicast packets. - * I don't need to zero the multicast table, because the flag is - * checked before the table is - */ - else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) { - DBG(SMC_DEBUG_MISC, dev, "RCR_ALMUL\n"); - mcr |= MAC_CR_MCPAS_; - } - - /* - * This sets the internal hardware table to filter out unwanted - * multicast packets before they take up memory. - * - * The SMC chip uses a hash table where the high 6 bits of the CRC of - * address are the offset into the table. If that bit is 1, then the - * multicast packet is accepted. Otherwise, it's dropped silently. - * - * To use the 6 bits as an offset into the table, the high 1 bit is - * the number of the 32 bit register, while the low 5 bits are the bit - * within that register. - */ - else if (!netdev_mc_empty(dev)) { - struct netdev_hw_addr *ha; - - /* Set the Hash perfec mode */ - mcr |= MAC_CR_HPFILT_; - - /* start with a table of all zeros: reject all */ - memset(multicast_table, 0, sizeof(multicast_table)); - - netdev_for_each_mc_addr(ha, dev) { - u32 position; - - /* upper 6 bits are used as hash index */ - position = ether_crc(ETH_ALEN, ha->addr)>>26; - - multicast_table[position>>5] |= 1 << (position&0x1f); - } - - /* be sure I get rid of flags I might have set */ - mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); - - /* now, the table can be loaded into the chipset */ - update_multicast = 1; - } else { - DBG(SMC_DEBUG_MISC, dev, "~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n"); - mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); - - /* - * since I'm disabling all multicast entirely, I need to - * clear the multicast list - */ - memset(multicast_table, 0, sizeof(multicast_table)); - update_multicast = 1; - } - - spin_lock_irqsave(&lp->lock, flags); - SMC_SET_MAC_CR(lp, mcr); - if (update_multicast) { - DBG(SMC_DEBUG_MISC, dev, - "update mcast hash table 0x%08x 0x%08x\n", - multicast_table[0], multicast_table[1]); - SMC_SET_HASHL(lp, multicast_table[0]); - SMC_SET_HASHH(lp, multicast_table[1]); - } - spin_unlock_irqrestore(&lp->lock, flags); -} - - -/* - * Open and Initialize the board - * - * Set up everything, reset the card, etc.. - */ -static int -smc911x_open(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - /* reset the hardware */ - smc911x_reset(dev); - - /* Configure the PHY, initialize the link state */ - smc911x_phy_configure(&lp->phy_configure); - - /* Turn on Tx + Rx */ - smc911x_enable(dev); - - netif_start_queue(dev); - - return 0; -} - -/* - * smc911x_close - * - * this makes the board clean up everything that it can - * and not talk to the outside world. Caused by - * an 'ifconfig ethX down' - */ -static int smc911x_close(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - netif_stop_queue(dev); - netif_carrier_off(dev); - - /* clear everything */ - smc911x_shutdown(dev); - - if (lp->phy_type != 0) { - /* We need to ensure that no calls to - * smc911x_phy_configure are pending. - */ - cancel_work_sync(&lp->phy_configure); - smc911x_phy_powerdown(dev, lp->mii.phy_id); - } - - if (lp->pending_tx_skb) { - dev_kfree_skb(lp->pending_tx_skb); - lp->pending_tx_skb = NULL; - } - - return 0; -} - -/* - * Ethtool support - */ -static int -smc911x_ethtool_get_link_ksettings(struct net_device *dev, - struct ethtool_link_ksettings *cmd) -{ - struct smc911x_local *lp = netdev_priv(dev); - int status; - unsigned long flags; - u32 supported; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - if (lp->phy_type != 0) { - spin_lock_irqsave(&lp->lock, flags); - mii_ethtool_get_link_ksettings(&lp->mii, cmd); - spin_unlock_irqrestore(&lp->lock, flags); - } else { - supported = SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_TP | SUPPORTED_AUI; - - if (lp->ctl_rspeed == 10) - cmd->base.speed = SPEED_10; - else if (lp->ctl_rspeed == 100) - cmd->base.speed = SPEED_100; - - cmd->base.autoneg = AUTONEG_DISABLE; - cmd->base.port = 0; - SMC_GET_PHY_SPECIAL(lp, lp->mii.phy_id, status); - cmd->base.duplex = - (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ? - DUPLEX_FULL : DUPLEX_HALF; - - ethtool_convert_legacy_u32_to_link_mode( - cmd->link_modes.supported, supported); - - } - - return 0; -} - -static int -smc911x_ethtool_set_link_ksettings(struct net_device *dev, - const struct ethtool_link_ksettings *cmd) -{ - struct smc911x_local *lp = netdev_priv(dev); - int ret; - unsigned long flags; - - if (lp->phy_type != 0) { - spin_lock_irqsave(&lp->lock, flags); - ret = mii_ethtool_set_link_ksettings(&lp->mii, cmd); - spin_unlock_irqrestore(&lp->lock, flags); - } else { - if (cmd->base.autoneg != AUTONEG_DISABLE || - cmd->base.speed != SPEED_10 || - (cmd->base.duplex != DUPLEX_HALF && - cmd->base.duplex != DUPLEX_FULL) || - (cmd->base.port != PORT_TP && - cmd->base.port != PORT_AUI)) - return -EINVAL; - - lp->ctl_rfduplx = cmd->base.duplex == DUPLEX_FULL; - - ret = 0; - } - - return ret; -} - -static void -smc911x_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - strscpy(info->driver, CARDNAME, sizeof(info->driver)); - strscpy(info->version, version, sizeof(info->version)); - strscpy(info->bus_info, dev_name(dev->dev.parent), - sizeof(info->bus_info)); -} - -static int smc911x_ethtool_nwayreset(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - int ret = -EINVAL; - unsigned long flags; - - if (lp->phy_type != 0) { - spin_lock_irqsave(&lp->lock, flags); - ret = mii_nway_restart(&lp->mii); - spin_unlock_irqrestore(&lp->lock, flags); - } - - return ret; -} - -static u32 smc911x_ethtool_getmsglevel(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - return lp->msg_enable; -} - -static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) -{ - struct smc911x_local *lp = netdev_priv(dev); - lp->msg_enable = level; -} - -static int smc911x_ethtool_getregslen(struct net_device *dev) -{ - /* System regs + MAC regs + PHY regs */ - return (((E2P_CMD - ID_REV)/4 + 1) + - (WUCSR - MAC_CR)+1 + 32) * sizeof(u32); -} - -static void smc911x_ethtool_getregs(struct net_device *dev, - struct ethtool_regs *regs, void *buf) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned long flags; - u32 reg,i,j=0; - u32 *data = (u32*)buf; - - regs->version = lp->version; - for(i=ID_REV;i<=E2P_CMD;i+=4) { - data[j++] = SMC_inl(lp, i); - } - for(i=MAC_CR;i<=WUCSR;i++) { - spin_lock_irqsave(&lp->lock, flags); - SMC_GET_MAC_CSR(lp, i, reg); - spin_unlock_irqrestore(&lp->lock, flags); - data[j++] = reg; - } - for(i=0;i<=31;i++) { - spin_lock_irqsave(&lp->lock, flags); - SMC_GET_MII(lp, i, lp->mii.phy_id, reg); - spin_unlock_irqrestore(&lp->lock, flags); - data[j++] = reg & 0xFFFF; - } -} - -static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - unsigned int timeout; - int e2p_cmd; - - e2p_cmd = SMC_GET_E2P_CMD(lp); - for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) { - if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) { - PRINTK(dev, "%s timeout waiting for EEPROM to respond\n", - __func__); - return -EFAULT; - } - mdelay(1); - e2p_cmd = SMC_GET_E2P_CMD(lp); - } - if (timeout == 0) { - PRINTK(dev, "%s timeout waiting for EEPROM CMD not busy\n", - __func__); - return -ETIMEDOUT; - } - return 0; -} - -static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev, - int cmd, int addr) -{ - struct smc911x_local *lp = netdev_priv(dev); - int ret; - - if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) - return ret; - SMC_SET_E2P_CMD(lp, E2P_CMD_EPC_BUSY_ | - ((cmd) & (0x7<<28)) | - ((addr) & 0xFF)); - return 0; -} - -static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev, - u8 *data) -{ - struct smc911x_local *lp = netdev_priv(dev); - int ret; - - if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) - return ret; - *data = SMC_GET_E2P_DATA(lp); - return 0; -} - -static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev, - u8 data) -{ - struct smc911x_local *lp = netdev_priv(dev); - int ret; - - if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) - return ret; - SMC_SET_E2P_DATA(lp, data); - return 0; -} - -static int smc911x_ethtool_geteeprom(struct net_device *dev, - struct ethtool_eeprom *eeprom, u8 *data) -{ - u8 eebuf[SMC911X_EEPROM_LEN]; - int i, ret; - - for(i=0;ioffset, eeprom->len); - return 0; -} - -static int smc911x_ethtool_seteeprom(struct net_device *dev, - struct ethtool_eeprom *eeprom, u8 *data) -{ - int i, ret; - - /* Enable erase */ - if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN_, 0 ))!=0) - return ret; - for(i=eeprom->offset;i<(eeprom->offset+eeprom->len);i++) { - /* erase byte */ - if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE_, i ))!=0) - return ret; - /* write byte */ - if ((ret=smc911x_ethtool_write_eeprom_byte(dev, *data))!=0) - return ret; - if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE_, i ))!=0) - return ret; - } - return 0; -} - -static int smc911x_ethtool_geteeprom_len(struct net_device *dev) -{ - return SMC911X_EEPROM_LEN; -} - -static const struct ethtool_ops smc911x_ethtool_ops = { - .get_drvinfo = smc911x_ethtool_getdrvinfo, - .get_msglevel = smc911x_ethtool_getmsglevel, - .set_msglevel = smc911x_ethtool_setmsglevel, - .nway_reset = smc911x_ethtool_nwayreset, - .get_link = ethtool_op_get_link, - .get_regs_len = smc911x_ethtool_getregslen, - .get_regs = smc911x_ethtool_getregs, - .get_eeprom_len = smc911x_ethtool_geteeprom_len, - .get_eeprom = smc911x_ethtool_geteeprom, - .set_eeprom = smc911x_ethtool_seteeprom, - .get_link_ksettings = smc911x_ethtool_get_link_ksettings, - .set_link_ksettings = smc911x_ethtool_set_link_ksettings, -}; - -/* - * smc911x_findirq - * - * This routine has a simple purpose -- make the SMC chip generate an - * interrupt, so an auto-detect routine can detect it, and find the IRQ, - */ -static int smc911x_findirq(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - int timeout = 20; - unsigned long cookie; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - cookie = probe_irq_on(); - - /* - * Force a SW interrupt - */ - - SMC_SET_INT_EN(lp, INT_EN_SW_INT_EN_); - - /* - * Wait until positive that the interrupt has been generated - */ - do { - int int_status; - udelay(10); - int_status = SMC_GET_INT_EN(lp); - if (int_status & INT_EN_SW_INT_EN_) - break; /* got the interrupt */ - } while (--timeout); - - /* - * there is really nothing that I can do here if timeout fails, - * as autoirq_report will return a 0 anyway, which is what I - * want in this case. Plus, the clean up is needed in both - * cases. - */ - - /* and disable all interrupts again */ - SMC_SET_INT_EN(lp, 0); - - /* and return what I found */ - return probe_irq_off(cookie); -} - -static const struct net_device_ops smc911x_netdev_ops = { - .ndo_open = smc911x_open, - .ndo_stop = smc911x_close, - .ndo_start_xmit = smc911x_hard_start_xmit, - .ndo_tx_timeout = smc911x_timeout, - .ndo_set_rx_mode = smc911x_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = smc911x_poll_controller, -#endif -}; - -/* - * Function: smc911x_probe(unsigned long ioaddr) - * - * Purpose: - * Tests to see if a given ioaddr points to an SMC911x chip. - * Returns a 0 on success - * - * Algorithm: - * (1) see if the endian word is OK - * (1) see if I recognize the chip ID in the appropriate register - * - * Here I do typical initialization tasks. - * - * o Initialize the structure if needed - * o print out my vanity message if not done so already - * o print out what type of hardware is detected - * o print out the ethernet address - * o find the IRQ - * o set up my private data - * o configure the dev structure with my subroutines - * o actually GRAB the irq. - * o GRAB the region - */ -static int smc911x_probe(struct net_device *dev) -{ - struct smc911x_local *lp = netdev_priv(dev); - int i, retval; - unsigned int val, chip_id, revision; - const char *version_string; - unsigned long irq_flags; -#ifdef SMC_USE_DMA - struct dma_slave_config config; - dma_cap_mask_t mask; -#endif - u8 addr[ETH_ALEN]; - - DBG(SMC_DEBUG_FUNC, dev, "--> %s\n", __func__); - - /* First, see if the endian word is recognized */ - val = SMC_GET_BYTE_TEST(lp); - DBG(SMC_DEBUG_MISC, dev, "%s: endian probe returned 0x%04x\n", - CARDNAME, val); - if (val != 0x87654321) { - netdev_err(dev, "Invalid chip endian 0x%08x\n", val); - retval = -ENODEV; - goto err_out; - } - - /* - * check if the revision register is something that I - * recognize. These might need to be added to later, - * as future revisions could be added. - */ - chip_id = SMC_GET_PN(lp); - DBG(SMC_DEBUG_MISC, dev, "%s: id probe returned 0x%04x\n", - CARDNAME, chip_id); - for(i=0;chip_ids[i].id != 0; i++) { - if (chip_ids[i].id == chip_id) break; - } - if (!chip_ids[i].id) { - netdev_err(dev, "Unknown chip ID %04x\n", chip_id); - retval = -ENODEV; - goto err_out; - } - version_string = chip_ids[i].name; - - revision = SMC_GET_REV(lp); - DBG(SMC_DEBUG_MISC, dev, "%s: revision = 0x%04x\n", CARDNAME, revision); - - /* At this point I'll assume that the chip is an SMC911x. */ - DBG(SMC_DEBUG_MISC, dev, "%s: Found a %s\n", - CARDNAME, chip_ids[i].name); - - /* Validate the TX FIFO size requested */ - if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) { - netdev_err(dev, "Invalid TX FIFO size requested %d\n", - tx_fifo_kb); - retval = -EINVAL; - goto err_out; - } - - /* fill in some of the fields */ - lp->version = chip_ids[i].id; - lp->revision = revision; - lp->tx_fifo_kb = tx_fifo_kb; - /* Reverse calculate the RX FIFO size from the TX */ - lp->tx_fifo_size=(lp->tx_fifo_kb<<10) - 512; - lp->rx_fifo_size= ((0x4000 - 512 - lp->tx_fifo_size) / 16) * 15; - - /* Set the automatic flow control values */ - switch(lp->tx_fifo_kb) { - /* - * AFC_HI is about ((Rx Data Fifo Size)*2/3)/64 - * AFC_LO is AFC_HI/2 - * BACK_DUR is about 5uS*(AFC_LO) rounded down - */ - case 2:/* 13440 Rx Data Fifo Size */ - lp->afc_cfg=0x008C46AF;break; - case 3:/* 12480 Rx Data Fifo Size */ - lp->afc_cfg=0x0082419F;break; - case 4:/* 11520 Rx Data Fifo Size */ - lp->afc_cfg=0x00783C9F;break; - case 5:/* 10560 Rx Data Fifo Size */ - lp->afc_cfg=0x006E374F;break; - case 6:/* 9600 Rx Data Fifo Size */ - lp->afc_cfg=0x0064328F;break; - case 7:/* 8640 Rx Data Fifo Size */ - lp->afc_cfg=0x005A2D7F;break; - case 8:/* 7680 Rx Data Fifo Size */ - lp->afc_cfg=0x0050287F;break; - case 9:/* 6720 Rx Data Fifo Size */ - lp->afc_cfg=0x0046236F;break; - case 10:/* 5760 Rx Data Fifo Size */ - lp->afc_cfg=0x003C1E6F;break; - case 11:/* 4800 Rx Data Fifo Size */ - lp->afc_cfg=0x0032195F;break; - /* - * AFC_HI is ~1520 bytes less than RX Data Fifo Size - * AFC_LO is AFC_HI/2 - * BACK_DUR is about 5uS*(AFC_LO) rounded down - */ - case 12:/* 3840 Rx Data Fifo Size */ - lp->afc_cfg=0x0024124F;break; - case 13:/* 2880 Rx Data Fifo Size */ - lp->afc_cfg=0x0015073F;break; - case 14:/* 1920 Rx Data Fifo Size */ - lp->afc_cfg=0x0006032F;break; - default: - PRINTK(dev, "ERROR -- no AFC_CFG setting found"); - break; - } - - DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, dev, - "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME, - lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg); - - spin_lock_init(&lp->lock); - - /* Get the MAC address */ - SMC_GET_MAC_ADDR(lp, addr); - eth_hw_addr_set(dev, addr); - - /* now, reset the chip, and put it into a known state */ - smc911x_reset(dev); - - /* - * If dev->irq is 0, then the device has to be banged on to see - * what the IRQ is. - * - * Specifying an IRQ is done with the assumption that the user knows - * what (s)he is doing. No checking is done!!!! - */ - if (dev->irq < 1) { - int trials; - - trials = 3; - while (trials--) { - dev->irq = smc911x_findirq(dev); - if (dev->irq) - break; - /* kick the card and try again */ - smc911x_reset(dev); - } - } - if (dev->irq == 0) { - netdev_warn(dev, "Couldn't autodetect your IRQ. Use irq=xx.\n"); - retval = -ENODEV; - goto err_out; - } - dev->irq = irq_canonicalize(dev->irq); - - dev->netdev_ops = &smc911x_netdev_ops; - dev->watchdog_timeo = msecs_to_jiffies(watchdog); - dev->ethtool_ops = &smc911x_ethtool_ops; - - INIT_WORK(&lp->phy_configure, smc911x_phy_configure); - lp->mii.phy_id_mask = 0x1f; - lp->mii.reg_num_mask = 0x1f; - lp->mii.force_media = 0; - lp->mii.full_duplex = 0; - lp->mii.dev = dev; - lp->mii.mdio_read = smc911x_phy_read; - lp->mii.mdio_write = smc911x_phy_write; - - /* - * Locate the phy, if any. - */ - smc911x_phy_detect(dev); - - /* Set default parameters */ - lp->msg_enable = NETIF_MSG_LINK; - lp->ctl_rfduplx = 1; - lp->ctl_rspeed = 100; - -#ifdef SMC_DYNAMIC_BUS_CONFIG - irq_flags = lp->cfg.irq_flags; -#else - irq_flags = IRQF_SHARED | SMC_IRQ_SENSE; -#endif - - /* Grab the IRQ */ - retval = request_irq(dev->irq, smc911x_interrupt, - irq_flags, dev->name, dev); - if (retval) - goto err_out; - -#ifdef SMC_USE_DMA - - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - lp->rxdma = dma_request_channel(mask, NULL, NULL); - lp->txdma = dma_request_channel(mask, NULL, NULL); - lp->rxdma_active = 0; - lp->txdma_active = 0; - - memset(&config, 0, sizeof(config)); - config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; - config.src_addr = lp->physaddr + RX_DATA_FIFO; - config.dst_addr = lp->physaddr + TX_DATA_FIFO; - config.src_maxburst = 32; - config.dst_maxburst = 32; - retval = dmaengine_slave_config(lp->rxdma, &config); - if (retval) { - dev_err(lp->dev, "dma rx channel configuration failed: %d\n", - retval); - goto err_out; - } - retval = dmaengine_slave_config(lp->txdma, &config); - if (retval) { - dev_err(lp->dev, "dma tx channel configuration failed: %d\n", - retval); - goto err_out; - } -#endif - - retval = register_netdev(dev); - if (retval == 0) { - /* now, print out the card info, in a short format.. */ - netdev_info(dev, "%s (rev %d) at %#lx IRQ %d", - version_string, lp->revision, - dev->base_addr, dev->irq); - -#ifdef SMC_USE_DMA - if (lp->rxdma) - pr_cont(" RXDMA %p", lp->rxdma); - - if (lp->txdma) - pr_cont(" TXDMA %p", lp->txdma); -#endif - pr_cont("\n"); - if (!is_valid_ether_addr(dev->dev_addr)) { - netdev_warn(dev, "Invalid ethernet MAC address. Please set using ifconfig\n"); - } else { - /* Print the Ethernet address */ - netdev_info(dev, "Ethernet addr: %pM\n", - dev->dev_addr); - } - - if (lp->phy_type == 0) { - PRINTK(dev, "No PHY found\n"); - } else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) { - PRINTK(dev, "LAN911x Internal PHY\n"); - } else { - PRINTK(dev, "External PHY 0x%08x\n", lp->phy_type); - } - } - -err_out: -#ifdef SMC_USE_DMA - if (retval) { - if (lp->rxdma) - dma_release_channel(lp->rxdma); - if (lp->txdma) - dma_release_channel(lp->txdma); - } -#endif - return retval; -} - -/* - * smc911x_drv_probe(void) - * - * Output: - * 0 --> there is a device - * anything else, error - */ -static int smc911x_drv_probe(struct platform_device *pdev) -{ - struct net_device *ndev; - struct resource *res; - struct smc911x_local *lp; - void __iomem *addr; - int ret; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - goto out; - } - - /* - * Request the regions. - */ - if (!request_mem_region(res->start, SMC911X_IO_EXTENT, CARDNAME)) { - ret = -EBUSY; - goto out; - } - - ndev = alloc_etherdev(sizeof(struct smc911x_local)); - if (!ndev) { - ret = -ENOMEM; - goto release_1; - } - SET_NETDEV_DEV(ndev, &pdev->dev); - - ndev->dma = (unsigned char)-1; - ndev->irq = platform_get_irq(pdev, 0); - if (ndev->irq < 0) { - ret = ndev->irq; - goto release_both; - } - - lp = netdev_priv(ndev); - lp->netdev = ndev; -#ifdef SMC_DYNAMIC_BUS_CONFIG - { - struct smc911x_platdata *pd = dev_get_platdata(&pdev->dev); - if (!pd) { - ret = -EINVAL; - goto release_both; - } - memcpy(&lp->cfg, pd, sizeof(lp->cfg)); - } -#endif - - addr = ioremap(res->start, SMC911X_IO_EXTENT); - if (!addr) { - ret = -ENOMEM; - goto release_both; - } - - platform_set_drvdata(pdev, ndev); - lp->base = addr; - ndev->base_addr = res->start; - ret = smc911x_probe(ndev); - if (ret != 0) { - iounmap(addr); -release_both: - free_netdev(ndev); -release_1: - release_mem_region(res->start, SMC911X_IO_EXTENT); -out: - pr_info("%s: not found (%d).\n", CARDNAME, ret); - } -#ifdef SMC_USE_DMA - else { - lp->physaddr = res->start; - lp->dev = &pdev->dev; - } -#endif - - return ret; -} - -static int smc911x_drv_remove(struct platform_device *pdev) -{ - struct net_device *ndev = platform_get_drvdata(pdev); - struct smc911x_local *lp = netdev_priv(ndev); - struct resource *res; - - DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__); - - unregister_netdev(ndev); - - free_irq(ndev->irq, ndev); - -#ifdef SMC_USE_DMA - { - if (lp->rxdma) - dma_release_channel(lp->rxdma); - if (lp->txdma) - dma_release_channel(lp->txdma); - } -#endif - iounmap(lp->base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, SMC911X_IO_EXTENT); - - free_netdev(ndev); - return 0; -} - -static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state) -{ - struct net_device *ndev = platform_get_drvdata(dev); - struct smc911x_local *lp = netdev_priv(ndev); - - DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__); - if (ndev) { - if (netif_running(ndev)) { - netif_device_detach(ndev); - smc911x_shutdown(ndev); -#if POWER_DOWN - /* Set D2 - Energy detect only setting */ - SMC_SET_PMT_CTRL(lp, 2<<12); -#endif - } - } - return 0; -} - -static int smc911x_drv_resume(struct platform_device *dev) -{ - struct net_device *ndev = platform_get_drvdata(dev); - - DBG(SMC_DEBUG_FUNC, ndev, "--> %s\n", __func__); - if (ndev) { - struct smc911x_local *lp = netdev_priv(ndev); - - if (netif_running(ndev)) { - smc911x_reset(ndev); - if (lp->phy_type != 0) - smc911x_phy_configure(&lp->phy_configure); - smc911x_enable(ndev); - netif_device_attach(ndev); - } - } - return 0; -} - -static struct platform_driver smc911x_driver = { - .probe = smc911x_drv_probe, - .remove = smc911x_drv_remove, - .suspend = smc911x_drv_suspend, - .resume = smc911x_drv_resume, - .driver = { - .name = CARDNAME, - }, -}; - -module_platform_driver(smc911x_driver); diff --git a/drivers/net/ethernet/smsc/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h deleted file mode 100644 index d4edcc0da87c..000000000000 --- a/drivers/net/ethernet/smsc/smc911x.h +++ /dev/null @@ -1,901 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/*------------------------------------------------------------------------ - . smc911x.h - macros for SMSC's LAN911{5,6,7,8} single-chip Ethernet device. - . - . Copyright (C) 2005 Sensoria Corp. - . Derived from the unified SMC91x driver by Nicolas Pitre - . - . - . Information contained in this file was obtained from the LAN9118 - . manual from SMC. To get a copy, if you really want one, you can find - . information under www.smsc.com. - . - . Authors - . Dustin McIntire - . - ---------------------------------------------------------------------------*/ -#ifndef _SMC911X_H_ -#define _SMC911X_H_ - -#include -/* - * Use the DMA feature on PXA chips - */ -#ifdef CONFIG_ARCH_PXA - #define SMC_USE_PXA_DMA 1 - #define SMC_USE_16BIT 0 - #define SMC_USE_32BIT 1 - #define SMC_IRQ_SENSE IRQF_TRIGGER_FALLING -#elif defined(CONFIG_SH_MAGIC_PANEL_R2) - #define SMC_USE_16BIT 0 - #define SMC_USE_32BIT 1 - #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW -#elif defined(CONFIG_ARCH_OMAP3) - #define SMC_USE_16BIT 0 - #define SMC_USE_32BIT 1 - #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW - #define SMC_MEM_RESERVED 1 -#elif defined(CONFIG_ARCH_OMAP2) - #define SMC_USE_16BIT 0 - #define SMC_USE_32BIT 1 - #define SMC_IRQ_SENSE IRQF_TRIGGER_LOW - #define SMC_MEM_RESERVED 1 -#else -/* - * Default configuration - */ - -#define SMC_DYNAMIC_BUS_CONFIG -#endif - -#ifdef SMC_USE_PXA_DMA -#define SMC_USE_DMA -#endif - -/* store this information for the driver.. */ -struct smc911x_local { - /* - * If I have to wait until the DMA is finished and ready to reload a - * packet, I will store the skbuff here. Then, the DMA will send it - * out and free it. - */ - struct sk_buff *pending_tx_skb; - - /* version/revision of the SMC911x chip */ - u16 version; - u16 revision; - - /* FIFO sizes */ - int tx_fifo_kb; - int tx_fifo_size; - int rx_fifo_size; - int afc_cfg; - - /* Contains the current active receive/phy mode */ - int ctl_rfduplx; - int ctl_rspeed; - - u32 msg_enable; - u32 phy_type; - struct mii_if_info mii; - - /* work queue */ - struct work_struct phy_configure; - - int tx_throttle; - spinlock_t lock; - - struct net_device *netdev; - -#ifdef SMC_USE_DMA - /* DMA needs the physical address of the chip */ - u_long physaddr; - struct dma_chan *rxdma; - struct dma_chan *txdma; - int rxdma_active; - int txdma_active; - struct sk_buff *current_rx_skb; - struct sk_buff *current_tx_skb; - struct device *dev; -#endif - void __iomem *base; -#ifdef SMC_DYNAMIC_BUS_CONFIG - struct smc911x_platdata cfg; -#endif -}; - -/* - * Define the bus width specific IO macros - */ - -#ifdef SMC_DYNAMIC_BUS_CONFIG -static inline unsigned int SMC_inl(struct smc911x_local *lp, int reg) -{ - void __iomem *ioaddr = lp->base + reg; - - if (lp->cfg.flags & SMC911X_USE_32BIT) - return readl(ioaddr); - - if (lp->cfg.flags & SMC911X_USE_16BIT) - return readw(ioaddr) | (readw(ioaddr + 2) << 16); - - BUG(); -} - -static inline void SMC_outl(unsigned int value, struct smc911x_local *lp, - int reg) -{ - void __iomem *ioaddr = lp->base + reg; - - if (lp->cfg.flags & SMC911X_USE_32BIT) { - writel(value, ioaddr); - return; - } - - if (lp->cfg.flags & SMC911X_USE_16BIT) { - writew(value & 0xffff, ioaddr); - writew(value >> 16, ioaddr + 2); - return; - } - - BUG(); -} - -static inline void SMC_insl(struct smc911x_local *lp, int reg, - void *addr, unsigned int count) -{ - void __iomem *ioaddr = lp->base + reg; - - if (lp->cfg.flags & SMC911X_USE_32BIT) { - ioread32_rep(ioaddr, addr, count); - return; - } - - if (lp->cfg.flags & SMC911X_USE_16BIT) { - ioread16_rep(ioaddr, addr, count * 2); - return; - } - - BUG(); -} - -static inline void SMC_outsl(struct smc911x_local *lp, int reg, - void *addr, unsigned int count) -{ - void __iomem *ioaddr = lp->base + reg; - - if (lp->cfg.flags & SMC911X_USE_32BIT) { - iowrite32_rep(ioaddr, addr, count); - return; - } - - if (lp->cfg.flags & SMC911X_USE_16BIT) { - iowrite16_rep(ioaddr, addr, count * 2); - return; - } - - BUG(); -} -#else -#if SMC_USE_16BIT -#define SMC_inl(lp, r) ((readw((lp)->base + (r)) & 0xFFFF) + (readw((lp)->base + (r) + 2) << 16)) -#define SMC_outl(v, lp, r) \ - do{ \ - writew(v & 0xFFFF, (lp)->base + (r)); \ - writew(v >> 16, (lp)->base + (r) + 2); \ - } while (0) -#define SMC_insl(lp, r, p, l) ioread16_rep((short*)((lp)->base + (r)), p, l*2) -#define SMC_outsl(lp, r, p, l) iowrite16_rep((short*)((lp)->base + (r)), p, l*2) - -#elif SMC_USE_32BIT -#define SMC_inl(lp, r) readl((lp)->base + (r)) -#define SMC_outl(v, lp, r) writel(v, (lp)->base + (r)) -#define SMC_insl(lp, r, p, l) ioread32_rep((int*)((lp)->base + (r)), p, l) -#define SMC_outsl(lp, r, p, l) iowrite32_rep((int*)((lp)->base + (r)), p, l) - -#endif /* SMC_USE_16BIT */ -#endif /* SMC_DYNAMIC_BUS_CONFIG */ - - -#ifdef SMC_USE_PXA_DMA - -/* - * Use a DMA for RX and TX packets. - */ -#include - -static dma_addr_t rx_dmabuf, tx_dmabuf; -static int rx_dmalen, tx_dmalen; -static void smc911x_rx_dma_irq(void *data); -static void smc911x_tx_dma_irq(void *data); - -#ifdef SMC_insl -#undef SMC_insl -#define SMC_insl(lp, r, p, l) \ - smc_pxa_dma_insl(lp, lp->physaddr, r, lp->rxdma, p, l) - -static inline void -smc_pxa_dma_insl(struct smc911x_local *lp, u_long physaddr, - int reg, struct dma_chan *dma, u_char *buf, int len) -{ - struct dma_async_tx_descriptor *tx; - - /* 64 bit alignment is required for memory to memory DMA */ - if ((long)buf & 4) { - *((u32 *)buf) = SMC_inl(lp, reg); - buf += 4; - len--; - } - - len *= 4; - rx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_FROM_DEVICE); - rx_dmalen = len; - tx = dmaengine_prep_slave_single(dma, rx_dmabuf, rx_dmalen, - DMA_DEV_TO_MEM, 0); - if (tx) { - tx->callback = smc911x_rx_dma_irq; - tx->callback_param = lp; - dmaengine_submit(tx); - dma_async_issue_pending(dma); - } -} -#endif - -#ifdef SMC_outsl -#undef SMC_outsl -#define SMC_outsl(lp, r, p, l) \ - smc_pxa_dma_outsl(lp, lp->physaddr, r, lp->txdma, p, l) - -static inline void -smc_pxa_dma_outsl(struct smc911x_local *lp, u_long physaddr, - int reg, struct dma_chan *dma, u_char *buf, int len) -{ - struct dma_async_tx_descriptor *tx; - - /* 64 bit alignment is required for memory to memory DMA */ - if ((long)buf & 4) { - SMC_outl(*((u32 *)buf), lp, reg); - buf += 4; - len--; - } - - len *= 4; - tx_dmabuf = dma_map_single(lp->dev, buf, len, DMA_TO_DEVICE); - tx_dmalen = len; - tx = dmaengine_prep_slave_single(dma, tx_dmabuf, tx_dmalen, - DMA_DEV_TO_MEM, 0); - if (tx) { - tx->callback = smc911x_tx_dma_irq; - tx->callback_param = lp; - dmaengine_submit(tx); - dma_async_issue_pending(dma); - } -} -#endif -#endif /* SMC_USE_PXA_DMA */ - - -/* Chip Parameters and Register Definitions */ - -#define SMC911X_TX_FIFO_LOW_THRESHOLD (1536*2) - -#define SMC911X_IO_EXTENT 0x100 - -#define SMC911X_EEPROM_LEN 7 - -/* Below are the register offsets and bit definitions - * of the Lan911x memory space - */ -#define RX_DATA_FIFO (0x00) - -#define TX_DATA_FIFO (0x20) -#define TX_CMD_A_INT_ON_COMP_ (0x80000000) -#define TX_CMD_A_INT_BUF_END_ALGN_ (0x03000000) -#define TX_CMD_A_INT_4_BYTE_ALGN_ (0x00000000) -#define TX_CMD_A_INT_16_BYTE_ALGN_ (0x01000000) -#define TX_CMD_A_INT_32_BYTE_ALGN_ (0x02000000) -#define TX_CMD_A_INT_DATA_OFFSET_ (0x001F0000) -#define TX_CMD_A_INT_FIRST_SEG_ (0x00002000) -#define TX_CMD_A_INT_LAST_SEG_ (0x00001000) -#define TX_CMD_A_BUF_SIZE_ (0x000007FF) -#define TX_CMD_B_PKT_TAG_ (0xFFFF0000) -#define TX_CMD_B_ADD_CRC_DISABLE_ (0x00002000) -#define TX_CMD_B_DISABLE_PADDING_ (0x00001000) -#define TX_CMD_B_PKT_BYTE_LENGTH_ (0x000007FF) - -#define RX_STATUS_FIFO (0x40) -#define RX_STS_PKT_LEN_ (0x3FFF0000) -#define RX_STS_ES_ (0x00008000) -#define RX_STS_BCST_ (0x00002000) -#define RX_STS_LEN_ERR_ (0x00001000) -#define RX_STS_RUNT_ERR_ (0x00000800) -#define RX_STS_MCAST_ (0x00000400) -#define RX_STS_TOO_LONG_ (0x00000080) -#define RX_STS_COLL_ (0x00000040) -#define RX_STS_ETH_TYPE_ (0x00000020) -#define RX_STS_WDOG_TMT_ (0x00000010) -#define RX_STS_MII_ERR_ (0x00000008) -#define RX_STS_DRIBBLING_ (0x00000004) -#define RX_STS_CRC_ERR_ (0x00000002) -#define RX_STATUS_FIFO_PEEK (0x44) -#define TX_STATUS_FIFO (0x48) -#define TX_STS_TAG_ (0xFFFF0000) -#define TX_STS_ES_ (0x00008000) -#define TX_STS_LOC_ (0x00000800) -#define TX_STS_NO_CARR_ (0x00000400) -#define TX_STS_LATE_COLL_ (0x00000200) -#define TX_STS_MANY_COLL_ (0x00000100) -#define TX_STS_COLL_CNT_ (0x00000078) -#define TX_STS_MANY_DEFER_ (0x00000004) -#define TX_STS_UNDERRUN_ (0x00000002) -#define TX_STS_DEFERRED_ (0x00000001) -#define TX_STATUS_FIFO_PEEK (0x4C) -#define ID_REV (0x50) -#define ID_REV_CHIP_ID_ (0xFFFF0000) /* RO */ -#define ID_REV_REV_ID_ (0x0000FFFF) /* RO */ - -#define INT_CFG (0x54) -#define INT_CFG_INT_DEAS_ (0xFF000000) /* R/W */ -#define INT_CFG_INT_DEAS_CLR_ (0x00004000) -#define INT_CFG_INT_DEAS_STS_ (0x00002000) -#define INT_CFG_IRQ_INT_ (0x00001000) /* RO */ -#define INT_CFG_IRQ_EN_ (0x00000100) /* R/W */ -#define INT_CFG_IRQ_POL_ (0x00000010) /* R/W Not Affected by SW Reset */ -#define INT_CFG_IRQ_TYPE_ (0x00000001) /* R/W Not Affected by SW Reset */ - -#define INT_STS (0x58) -#define INT_STS_SW_INT_ (0x80000000) /* R/WC */ -#define INT_STS_TXSTOP_INT_ (0x02000000) /* R/WC */ -#define INT_STS_RXSTOP_INT_ (0x01000000) /* R/WC */ -#define INT_STS_RXDFH_INT_ (0x00800000) /* R/WC */ -#define INT_STS_RXDF_INT_ (0x00400000) /* R/WC */ -#define INT_STS_TX_IOC_ (0x00200000) /* R/WC */ -#define INT_STS_RXD_INT_ (0x00100000) /* R/WC */ -#define INT_STS_GPT_INT_ (0x00080000) /* R/WC */ -#define INT_STS_PHY_INT_ (0x00040000) /* RO */ -#define INT_STS_PME_INT_ (0x00020000) /* R/WC */ -#define INT_STS_TXSO_ (0x00010000) /* R/WC */ -#define INT_STS_RWT_ (0x00008000) /* R/WC */ -#define INT_STS_RXE_ (0x00004000) /* R/WC */ -#define INT_STS_TXE_ (0x00002000) /* R/WC */ -//#define INT_STS_ERX_ (0x00001000) /* R/WC */ -#define INT_STS_TDFU_ (0x00000800) /* R/WC */ -#define INT_STS_TDFO_ (0x00000400) /* R/WC */ -#define INT_STS_TDFA_ (0x00000200) /* R/WC */ -#define INT_STS_TSFF_ (0x00000100) /* R/WC */ -#define INT_STS_TSFL_ (0x00000080) /* R/WC */ -//#define INT_STS_RXDF_ (0x00000040) /* R/WC */ -#define INT_STS_RDFO_ (0x00000040) /* R/WC */ -#define INT_STS_RDFL_ (0x00000020) /* R/WC */ -#define INT_STS_RSFF_ (0x00000010) /* R/WC */ -#define INT_STS_RSFL_ (0x00000008) /* R/WC */ -#define INT_STS_GPIO2_INT_ (0x00000004) /* R/WC */ -#define INT_STS_GPIO1_INT_ (0x00000002) /* R/WC */ -#define INT_STS_GPIO0_INT_ (0x00000001) /* R/WC */ - -#define INT_EN (0x5C) -#define INT_EN_SW_INT_EN_ (0x80000000) /* R/W */ -#define INT_EN_TXSTOP_INT_EN_ (0x02000000) /* R/W */ -#define INT_EN_RXSTOP_INT_EN_ (0x01000000) /* R/W */ -#define INT_EN_RXDFH_INT_EN_ (0x00800000) /* R/W */ -//#define INT_EN_RXDF_INT_EN_ (0x00400000) /* R/W */ -#define INT_EN_TIOC_INT_EN_ (0x00200000) /* R/W */ -#define INT_EN_RXD_INT_EN_ (0x00100000) /* R/W */ -#define INT_EN_GPT_INT_EN_ (0x00080000) /* R/W */ -#define INT_EN_PHY_INT_EN_ (0x00040000) /* R/W */ -#define INT_EN_PME_INT_EN_ (0x00020000) /* R/W */ -#define INT_EN_TXSO_EN_ (0x00010000) /* R/W */ -#define INT_EN_RWT_EN_ (0x00008000) /* R/W */ -#define INT_EN_RXE_EN_ (0x00004000) /* R/W */ -#define INT_EN_TXE_EN_ (0x00002000) /* R/W */ -//#define INT_EN_ERX_EN_ (0x00001000) /* R/W */ -#define INT_EN_TDFU_EN_ (0x00000800) /* R/W */ -#define INT_EN_TDFO_EN_ (0x00000400) /* R/W */ -#define INT_EN_TDFA_EN_ (0x00000200) /* R/W */ -#define INT_EN_TSFF_EN_ (0x00000100) /* R/W */ -#define INT_EN_TSFL_EN_ (0x00000080) /* R/W */ -//#define INT_EN_RXDF_EN_ (0x00000040) /* R/W */ -#define INT_EN_RDFO_EN_ (0x00000040) /* R/W */ -#define INT_EN_RDFL_EN_ (0x00000020) /* R/W */ -#define INT_EN_RSFF_EN_ (0x00000010) /* R/W */ -#define INT_EN_RSFL_EN_ (0x00000008) /* R/W */ -#define INT_EN_GPIO2_INT_ (0x00000004) /* R/W */ -#define INT_EN_GPIO1_INT_ (0x00000002) /* R/W */ -#define INT_EN_GPIO0_INT_ (0x00000001) /* R/W */ - -#define BYTE_TEST (0x64) -#define FIFO_INT (0x68) -#define FIFO_INT_TX_AVAIL_LEVEL_ (0xFF000000) /* R/W */ -#define FIFO_INT_TX_STS_LEVEL_ (0x00FF0000) /* R/W */ -#define FIFO_INT_RX_AVAIL_LEVEL_ (0x0000FF00) /* R/W */ -#define FIFO_INT_RX_STS_LEVEL_ (0x000000FF) /* R/W */ - -#define RX_CFG (0x6C) -#define RX_CFG_RX_END_ALGN_ (0xC0000000) /* R/W */ -#define RX_CFG_RX_END_ALGN4_ (0x00000000) /* R/W */ -#define RX_CFG_RX_END_ALGN16_ (0x40000000) /* R/W */ -#define RX_CFG_RX_END_ALGN32_ (0x80000000) /* R/W */ -#define RX_CFG_RX_DMA_CNT_ (0x0FFF0000) /* R/W */ -#define RX_CFG_RX_DUMP_ (0x00008000) /* R/W */ -#define RX_CFG_RXDOFF_ (0x00001F00) /* R/W */ -//#define RX_CFG_RXBAD_ (0x00000001) /* R/W */ - -#define TX_CFG (0x70) -//#define TX_CFG_TX_DMA_LVL_ (0xE0000000) /* R/W */ -//#define TX_CFG_TX_DMA_CNT_ (0x0FFF0000) /* R/W Self Clearing */ -#define TX_CFG_TXS_DUMP_ (0x00008000) /* Self Clearing */ -#define TX_CFG_TXD_DUMP_ (0x00004000) /* Self Clearing */ -#define TX_CFG_TXSAO_ (0x00000004) /* R/W */ -#define TX_CFG_TX_ON_ (0x00000002) /* R/W */ -#define TX_CFG_STOP_TX_ (0x00000001) /* Self Clearing */ - -#define HW_CFG (0x74) -#define HW_CFG_TTM_ (0x00200000) /* R/W */ -#define HW_CFG_SF_ (0x00100000) /* R/W */ -#define HW_CFG_TX_FIF_SZ_ (0x000F0000) /* R/W */ -#define HW_CFG_TR_ (0x00003000) /* R/W */ -#define HW_CFG_PHY_CLK_SEL_ (0x00000060) /* R/W */ -#define HW_CFG_PHY_CLK_SEL_INT_PHY_ (0x00000000) /* R/W */ -#define HW_CFG_PHY_CLK_SEL_EXT_PHY_ (0x00000020) /* R/W */ -#define HW_CFG_PHY_CLK_SEL_CLK_DIS_ (0x00000040) /* R/W */ -#define HW_CFG_SMI_SEL_ (0x00000010) /* R/W */ -#define HW_CFG_EXT_PHY_DET_ (0x00000008) /* RO */ -#define HW_CFG_EXT_PHY_EN_ (0x00000004) /* R/W */ -#define HW_CFG_32_16_BIT_MODE_ (0x00000004) /* RO */ -#define HW_CFG_SRST_TO_ (0x00000002) /* RO */ -#define HW_CFG_SRST_ (0x00000001) /* Self Clearing */ - -#define RX_DP_CTRL (0x78) -#define RX_DP_CTRL_RX_FFWD_ (0x80000000) /* R/W */ -#define RX_DP_CTRL_FFWD_BUSY_ (0x80000000) /* RO */ - -#define RX_FIFO_INF (0x7C) -#define RX_FIFO_INF_RXSUSED_ (0x00FF0000) /* RO */ -#define RX_FIFO_INF_RXDUSED_ (0x0000FFFF) /* RO */ - -#define TX_FIFO_INF (0x80) -#define TX_FIFO_INF_TSUSED_ (0x00FF0000) /* RO */ -#define TX_FIFO_INF_TDFREE_ (0x0000FFFF) /* RO */ - -#define PMT_CTRL (0x84) -#define PMT_CTRL_PM_MODE_ (0x00003000) /* Self Clearing */ -#define PMT_CTRL_PHY_RST_ (0x00000400) /* Self Clearing */ -#define PMT_CTRL_WOL_EN_ (0x00000200) /* R/W */ -#define PMT_CTRL_ED_EN_ (0x00000100) /* R/W */ -#define PMT_CTRL_PME_TYPE_ (0x00000040) /* R/W Not Affected by SW Reset */ -#define PMT_CTRL_WUPS_ (0x00000030) /* R/WC */ -#define PMT_CTRL_WUPS_NOWAKE_ (0x00000000) /* R/WC */ -#define PMT_CTRL_WUPS_ED_ (0x00000010) /* R/WC */ -#define PMT_CTRL_WUPS_WOL_ (0x00000020) /* R/WC */ -#define PMT_CTRL_WUPS_MULTI_ (0x00000030) /* R/WC */ -#define PMT_CTRL_PME_IND_ (0x00000008) /* R/W */ -#define PMT_CTRL_PME_POL_ (0x00000004) /* R/W */ -#define PMT_CTRL_PME_EN_ (0x00000002) /* R/W Not Affected by SW Reset */ -#define PMT_CTRL_READY_ (0x00000001) /* RO */ - -#define GPIO_CFG (0x88) -#define GPIO_CFG_LED3_EN_ (0x40000000) /* R/W */ -#define GPIO_CFG_LED2_EN_ (0x20000000) /* R/W */ -#define GPIO_CFG_LED1_EN_ (0x10000000) /* R/W */ -#define GPIO_CFG_GPIO2_INT_POL_ (0x04000000) /* R/W */ -#define GPIO_CFG_GPIO1_INT_POL_ (0x02000000) /* R/W */ -#define GPIO_CFG_GPIO0_INT_POL_ (0x01000000) /* R/W */ -#define GPIO_CFG_EEPR_EN_ (0x00700000) /* R/W */ -#define GPIO_CFG_GPIOBUF2_ (0x00040000) /* R/W */ -#define GPIO_CFG_GPIOBUF1_ (0x00020000) /* R/W */ -#define GPIO_CFG_GPIOBUF0_ (0x00010000) /* R/W */ -#define GPIO_CFG_GPIODIR2_ (0x00000400) /* R/W */ -#define GPIO_CFG_GPIODIR1_ (0x00000200) /* R/W */ -#define GPIO_CFG_GPIODIR0_ (0x00000100) /* R/W */ -#define GPIO_CFG_GPIOD4_ (0x00000010) /* R/W */ -#define GPIO_CFG_GPIOD3_ (0x00000008) /* R/W */ -#define GPIO_CFG_GPIOD2_ (0x00000004) /* R/W */ -#define GPIO_CFG_GPIOD1_ (0x00000002) /* R/W */ -#define GPIO_CFG_GPIOD0_ (0x00000001) /* R/W */ - -#define GPT_CFG (0x8C) -#define GPT_CFG_TIMER_EN_ (0x20000000) /* R/W */ -#define GPT_CFG_GPT_LOAD_ (0x0000FFFF) /* R/W */ - -#define GPT_CNT (0x90) -#define GPT_CNT_GPT_CNT_ (0x0000FFFF) /* RO */ - -#define ENDIAN (0x98) -#define FREE_RUN (0x9C) -#define RX_DROP (0xA0) -#define MAC_CSR_CMD (0xA4) -#define MAC_CSR_CMD_CSR_BUSY_ (0x80000000) /* Self Clearing */ -#define MAC_CSR_CMD_R_NOT_W_ (0x40000000) /* R/W */ -#define MAC_CSR_CMD_CSR_ADDR_ (0x000000FF) /* R/W */ - -#define MAC_CSR_DATA (0xA8) -#define AFC_CFG (0xAC) -#define AFC_CFG_AFC_HI_ (0x00FF0000) /* R/W */ -#define AFC_CFG_AFC_LO_ (0x0000FF00) /* R/W */ -#define AFC_CFG_BACK_DUR_ (0x000000F0) /* R/W */ -#define AFC_CFG_FCMULT_ (0x00000008) /* R/W */ -#define AFC_CFG_FCBRD_ (0x00000004) /* R/W */ -#define AFC_CFG_FCADD_ (0x00000002) /* R/W */ -#define AFC_CFG_FCANY_ (0x00000001) /* R/W */ - -#define E2P_CMD (0xB0) -#define E2P_CMD_EPC_BUSY_ (0x80000000) /* Self Clearing */ -#define E2P_CMD_EPC_CMD_ (0x70000000) /* R/W */ -#define E2P_CMD_EPC_CMD_READ_ (0x00000000) /* R/W */ -#define E2P_CMD_EPC_CMD_EWDS_ (0x10000000) /* R/W */ -#define E2P_CMD_EPC_CMD_EWEN_ (0x20000000) /* R/W */ -#define E2P_CMD_EPC_CMD_WRITE_ (0x30000000) /* R/W */ -#define E2P_CMD_EPC_CMD_WRAL_ (0x40000000) /* R/W */ -#define E2P_CMD_EPC_CMD_ERASE_ (0x50000000) /* R/W */ -#define E2P_CMD_EPC_CMD_ERAL_ (0x60000000) /* R/W */ -#define E2P_CMD_EPC_CMD_RELOAD_ (0x70000000) /* R/W */ -#define E2P_CMD_EPC_TIMEOUT_ (0x00000200) /* RO */ -#define E2P_CMD_MAC_ADDR_LOADED_ (0x00000100) /* RO */ -#define E2P_CMD_EPC_ADDR_ (0x000000FF) /* R/W */ - -#define E2P_DATA (0xB4) -#define E2P_DATA_EEPROM_DATA_ (0x000000FF) /* R/W */ -/* end of LAN register offsets and bit definitions */ - -/* - **************************************************************************** - **************************************************************************** - * MAC Control and Status Register (Indirect Address) - * Offset (through the MAC_CSR CMD and DATA port) - **************************************************************************** - **************************************************************************** - * - */ -#define MAC_CR (0x01) /* R/W */ - -/* MAC_CR - MAC Control Register */ -#define MAC_CR_RXALL_ (0x80000000) -// TODO: delete this bit? It is not described in the data sheet. -#define MAC_CR_HBDIS_ (0x10000000) -#define MAC_CR_RCVOWN_ (0x00800000) -#define MAC_CR_LOOPBK_ (0x00200000) -#define MAC_CR_FDPX_ (0x00100000) -#define MAC_CR_MCPAS_ (0x00080000) -#define MAC_CR_PRMS_ (0x00040000) -#define MAC_CR_INVFILT_ (0x00020000) -#define MAC_CR_PASSBAD_ (0x00010000) -#define MAC_CR_HFILT_ (0x00008000) -#define MAC_CR_HPFILT_ (0x00002000) -#define MAC_CR_LCOLL_ (0x00001000) -#define MAC_CR_BCAST_ (0x00000800) -#define MAC_CR_DISRTY_ (0x00000400) -#define MAC_CR_PADSTR_ (0x00000100) -#define MAC_CR_BOLMT_MASK_ (0x000000C0) -#define MAC_CR_DFCHK_ (0x00000020) -#define MAC_CR_TXEN_ (0x00000008) -#define MAC_CR_RXEN_ (0x00000004) - -#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */ -#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */ -#define HASHH (0x04) /* R/W */ -#define HASHL (0x05) /* R/W */ - -#define MII_ACC (0x06) /* R/W */ -#define MII_ACC_PHY_ADDR_ (0x0000F800) -#define MII_ACC_MIIRINDA_ (0x000007C0) -#define MII_ACC_MII_WRITE_ (0x00000002) -#define MII_ACC_MII_BUSY_ (0x00000001) - -#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */ - -#define FLOW (0x08) /* R/W */ -#define FLOW_FCPT_ (0xFFFF0000) -#define FLOW_FCPASS_ (0x00000004) -#define FLOW_FCEN_ (0x00000002) -#define FLOW_FCBSY_ (0x00000001) - -#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */ -#define VLAN1_VTI1_ (0x0000ffff) - -#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */ -#define VLAN2_VTI2_ (0x0000ffff) - -#define WUFF (0x0B) /* WO */ - -#define WUCSR (0x0C) /* R/W */ -#define WUCSR_GUE_ (0x00000200) -#define WUCSR_WUFR_ (0x00000040) -#define WUCSR_MPR_ (0x00000020) -#define WUCSR_WAKE_EN_ (0x00000004) -#define WUCSR_MPEN_ (0x00000002) - -/* - **************************************************************************** - * Chip Specific MII Defines - **************************************************************************** - * - * Phy register offsets and bit definitions - * - */ - -#define PHY_MODE_CTRL_STS ((u32)17) /* Mode Control/Status Register */ -//#define MODE_CTRL_STS_FASTRIP_ ((u16)0x4000) -#define MODE_CTRL_STS_EDPWRDOWN_ ((u16)0x2000) -//#define MODE_CTRL_STS_LOWSQEN_ ((u16)0x0800) -//#define MODE_CTRL_STS_MDPREBP_ ((u16)0x0400) -//#define MODE_CTRL_STS_FARLOOPBACK_ ((u16)0x0200) -//#define MODE_CTRL_STS_FASTEST_ ((u16)0x0100) -//#define MODE_CTRL_STS_REFCLKEN_ ((u16)0x0010) -//#define MODE_CTRL_STS_PHYADBP_ ((u16)0x0008) -//#define MODE_CTRL_STS_FORCE_G_LINK_ ((u16)0x0004) -#define MODE_CTRL_STS_ENERGYON_ ((u16)0x0002) - -#define PHY_INT_SRC ((u32)29) -#define PHY_INT_SRC_ENERGY_ON_ ((u16)0x0080) -#define PHY_INT_SRC_ANEG_COMP_ ((u16)0x0040) -#define PHY_INT_SRC_REMOTE_FAULT_ ((u16)0x0020) -#define PHY_INT_SRC_LINK_DOWN_ ((u16)0x0010) -#define PHY_INT_SRC_ANEG_LP_ACK_ ((u16)0x0008) -#define PHY_INT_SRC_PAR_DET_FAULT_ ((u16)0x0004) -#define PHY_INT_SRC_ANEG_PGRX_ ((u16)0x0002) - -#define PHY_INT_MASK ((u32)30) -#define PHY_INT_MASK_ENERGY_ON_ ((u16)0x0080) -#define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040) -#define PHY_INT_MASK_REMOTE_FAULT_ ((u16)0x0020) -#define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010) -#define PHY_INT_MASK_ANEG_LP_ACK_ ((u16)0x0008) -#define PHY_INT_MASK_PAR_DET_FAULT_ ((u16)0x0004) -#define PHY_INT_MASK_ANEG_PGRX_ ((u16)0x0002) - -#define PHY_SPECIAL ((u32)31) -#define PHY_SPECIAL_ANEG_DONE_ ((u16)0x1000) -#define PHY_SPECIAL_RES_ ((u16)0x0040) -#define PHY_SPECIAL_RES_MASK_ ((u16)0x0FE1) -#define PHY_SPECIAL_SPD_ ((u16)0x001C) -#define PHY_SPECIAL_SPD_10HALF_ ((u16)0x0004) -#define PHY_SPECIAL_SPD_10FULL_ ((u16)0x0014) -#define PHY_SPECIAL_SPD_100HALF_ ((u16)0x0008) -#define PHY_SPECIAL_SPD_100FULL_ ((u16)0x0018) - -#define LAN911X_INTERNAL_PHY_ID (0x0007C000) - -/* Chip ID values */ -#define CHIP_9115 0x0115 -#define CHIP_9116 0x0116 -#define CHIP_9117 0x0117 -#define CHIP_9118 0x0118 -#define CHIP_9211 0x9211 -#define CHIP_9215 0x115A -#define CHIP_9217 0x117A -#define CHIP_9218 0x118A - -struct chip_id { - u16 id; - char *name; -}; - -static const struct chip_id chip_ids[] = { - { CHIP_9115, "LAN9115" }, - { CHIP_9116, "LAN9116" }, - { CHIP_9117, "LAN9117" }, - { CHIP_9118, "LAN9118" }, - { CHIP_9211, "LAN9211" }, - { CHIP_9215, "LAN9215" }, - { CHIP_9217, "LAN9217" }, - { CHIP_9218, "LAN9218" }, - { 0, NULL }, -}; - -#define IS_REV_A(x) ((x & 0xFFFF)==0) - -/* - * Macros to abstract register access according to the data bus - * capabilities. Please use those and not the in/out primitives. - */ -/* FIFO read/write macros */ -#define SMC_PUSH_DATA(lp, p, l) SMC_outsl( lp, TX_DATA_FIFO, p, (l) >> 2 ) -#define SMC_PULL_DATA(lp, p, l) SMC_insl ( lp, RX_DATA_FIFO, p, (l) >> 2 ) -#define SMC_SET_TX_FIFO(lp, x) SMC_outl( x, lp, TX_DATA_FIFO ) -#define SMC_GET_RX_FIFO(lp) SMC_inl( lp, RX_DATA_FIFO ) - - -/* I/O mapped register read/write macros */ -#define SMC_GET_TX_STS_FIFO(lp) SMC_inl( lp, TX_STATUS_FIFO ) -#define SMC_GET_RX_STS_FIFO(lp) SMC_inl( lp, RX_STATUS_FIFO ) -#define SMC_GET_RX_STS_FIFO_PEEK(lp) SMC_inl( lp, RX_STATUS_FIFO_PEEK ) -#define SMC_GET_PN(lp) (SMC_inl( lp, ID_REV ) >> 16) -#define SMC_GET_REV(lp) (SMC_inl( lp, ID_REV ) & 0xFFFF) -#define SMC_GET_IRQ_CFG(lp) SMC_inl( lp, INT_CFG ) -#define SMC_SET_IRQ_CFG(lp, x) SMC_outl( x, lp, INT_CFG ) -#define SMC_GET_INT(lp) SMC_inl( lp, INT_STS ) -#define SMC_ACK_INT(lp, x) SMC_outl( x, lp, INT_STS ) -#define SMC_GET_INT_EN(lp) SMC_inl( lp, INT_EN ) -#define SMC_SET_INT_EN(lp, x) SMC_outl( x, lp, INT_EN ) -#define SMC_GET_BYTE_TEST(lp) SMC_inl( lp, BYTE_TEST ) -#define SMC_SET_BYTE_TEST(lp, x) SMC_outl( x, lp, BYTE_TEST ) -#define SMC_GET_FIFO_INT(lp) SMC_inl( lp, FIFO_INT ) -#define SMC_SET_FIFO_INT(lp, x) SMC_outl( x, lp, FIFO_INT ) -#define SMC_SET_FIFO_TDA(lp, x) \ - do { \ - unsigned long __flags; \ - int __mask; \ - local_irq_save(__flags); \ - __mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<24); \ - SMC_SET_FIFO_INT( (lp), __mask | (x)<<24 ); \ - local_irq_restore(__flags); \ - } while (0) -#define SMC_SET_FIFO_TSL(lp, x) \ - do { \ - unsigned long __flags; \ - int __mask; \ - local_irq_save(__flags); \ - __mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<16); \ - SMC_SET_FIFO_INT( (lp), __mask | (((x) & 0xFF)<<16)); \ - local_irq_restore(__flags); \ - } while (0) -#define SMC_SET_FIFO_RSA(lp, x) \ - do { \ - unsigned long __flags; \ - int __mask; \ - local_irq_save(__flags); \ - __mask = SMC_GET_FIFO_INT((lp)) & ~(0xFF<<8); \ - SMC_SET_FIFO_INT( (lp), __mask | (((x) & 0xFF)<<8)); \ - local_irq_restore(__flags); \ - } while (0) -#define SMC_SET_FIFO_RSL(lp, x) \ - do { \ - unsigned long __flags; \ - int __mask; \ - local_irq_save(__flags); \ - __mask = SMC_GET_FIFO_INT((lp)) & ~0xFF; \ - SMC_SET_FIFO_INT( (lp),__mask | ((x) & 0xFF)); \ - local_irq_restore(__flags); \ - } while (0) -#define SMC_GET_RX_CFG(lp) SMC_inl( lp, RX_CFG ) -#define SMC_SET_RX_CFG(lp, x) SMC_outl( x, lp, RX_CFG ) -#define SMC_GET_TX_CFG(lp) SMC_inl( lp, TX_CFG ) -#define SMC_SET_TX_CFG(lp, x) SMC_outl( x, lp, TX_CFG ) -#define SMC_GET_HW_CFG(lp) SMC_inl( lp, HW_CFG ) -#define SMC_SET_HW_CFG(lp, x) SMC_outl( x, lp, HW_CFG ) -#define SMC_GET_RX_DP_CTRL(lp) SMC_inl( lp, RX_DP_CTRL ) -#define SMC_SET_RX_DP_CTRL(lp, x) SMC_outl( x, lp, RX_DP_CTRL ) -#define SMC_GET_PMT_CTRL(lp) SMC_inl( lp, PMT_CTRL ) -#define SMC_SET_PMT_CTRL(lp, x) SMC_outl( x, lp, PMT_CTRL ) -#define SMC_GET_GPIO_CFG(lp) SMC_inl( lp, GPIO_CFG ) -#define SMC_SET_GPIO_CFG(lp, x) SMC_outl( x, lp, GPIO_CFG ) -#define SMC_GET_RX_FIFO_INF(lp) SMC_inl( lp, RX_FIFO_INF ) -#define SMC_SET_RX_FIFO_INF(lp, x) SMC_outl( x, lp, RX_FIFO_INF ) -#define SMC_GET_TX_FIFO_INF(lp) SMC_inl( lp, TX_FIFO_INF ) -#define SMC_SET_TX_FIFO_INF(lp, x) SMC_outl( x, lp, TX_FIFO_INF ) -#define SMC_GET_GPT_CFG(lp) SMC_inl( lp, GPT_CFG ) -#define SMC_SET_GPT_CFG(lp, x) SMC_outl( x, lp, GPT_CFG ) -#define SMC_GET_RX_DROP(lp) SMC_inl( lp, RX_DROP ) -#define SMC_SET_RX_DROP(lp, x) SMC_outl( x, lp, RX_DROP ) -#define SMC_GET_MAC_CMD(lp) SMC_inl( lp, MAC_CSR_CMD ) -#define SMC_SET_MAC_CMD(lp, x) SMC_outl( x, lp, MAC_CSR_CMD ) -#define SMC_GET_MAC_DATA(lp) SMC_inl( lp, MAC_CSR_DATA ) -#define SMC_SET_MAC_DATA(lp, x) SMC_outl( x, lp, MAC_CSR_DATA ) -#define SMC_GET_AFC_CFG(lp) SMC_inl( lp, AFC_CFG ) -#define SMC_SET_AFC_CFG(lp, x) SMC_outl( x, lp, AFC_CFG ) -#define SMC_GET_E2P_CMD(lp) SMC_inl( lp, E2P_CMD ) -#define SMC_SET_E2P_CMD(lp, x) SMC_outl( x, lp, E2P_CMD ) -#define SMC_GET_E2P_DATA(lp) SMC_inl( lp, E2P_DATA ) -#define SMC_SET_E2P_DATA(lp, x) SMC_outl( x, lp, E2P_DATA ) - -/* MAC register read/write macros */ -#define SMC_GET_MAC_CSR(lp,a,v) \ - do { \ - while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ - SMC_SET_MAC_CMD((lp),MAC_CSR_CMD_CSR_BUSY_ | \ - MAC_CSR_CMD_R_NOT_W_ | (a) ); \ - while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ - v = SMC_GET_MAC_DATA((lp)); \ - } while (0) -#define SMC_SET_MAC_CSR(lp,a,v) \ - do { \ - while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ - SMC_SET_MAC_DATA((lp), v); \ - SMC_SET_MAC_CMD((lp), MAC_CSR_CMD_CSR_BUSY_ | (a) ); \ - while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ - } while (0) -#define SMC_GET_MAC_CR(lp, x) SMC_GET_MAC_CSR( (lp), MAC_CR, x ) -#define SMC_SET_MAC_CR(lp, x) SMC_SET_MAC_CSR( (lp), MAC_CR, x ) -#define SMC_GET_ADDRH(lp, x) SMC_GET_MAC_CSR( (lp), ADDRH, x ) -#define SMC_SET_ADDRH(lp, x) SMC_SET_MAC_CSR( (lp), ADDRH, x ) -#define SMC_GET_ADDRL(lp, x) SMC_GET_MAC_CSR( (lp), ADDRL, x ) -#define SMC_SET_ADDRL(lp, x) SMC_SET_MAC_CSR( (lp), ADDRL, x ) -#define SMC_GET_HASHH(lp, x) SMC_GET_MAC_CSR( (lp), HASHH, x ) -#define SMC_SET_HASHH(lp, x) SMC_SET_MAC_CSR( (lp), HASHH, x ) -#define SMC_GET_HASHL(lp, x) SMC_GET_MAC_CSR( (lp), HASHL, x ) -#define SMC_SET_HASHL(lp, x) SMC_SET_MAC_CSR( (lp), HASHL, x ) -#define SMC_GET_MII_ACC(lp, x) SMC_GET_MAC_CSR( (lp), MII_ACC, x ) -#define SMC_SET_MII_ACC(lp, x) SMC_SET_MAC_CSR( (lp), MII_ACC, x ) -#define SMC_GET_MII_DATA(lp, x) SMC_GET_MAC_CSR( (lp), MII_DATA, x ) -#define SMC_SET_MII_DATA(lp, x) SMC_SET_MAC_CSR( (lp), MII_DATA, x ) -#define SMC_GET_FLOW(lp, x) SMC_GET_MAC_CSR( (lp), FLOW, x ) -#define SMC_SET_FLOW(lp, x) SMC_SET_MAC_CSR( (lp), FLOW, x ) -#define SMC_GET_VLAN1(lp, x) SMC_GET_MAC_CSR( (lp), VLAN1, x ) -#define SMC_SET_VLAN1(lp, x) SMC_SET_MAC_CSR( (lp), VLAN1, x ) -#define SMC_GET_VLAN2(lp, x) SMC_GET_MAC_CSR( (lp), VLAN2, x ) -#define SMC_SET_VLAN2(lp, x) SMC_SET_MAC_CSR( (lp), VLAN2, x ) -#define SMC_SET_WUFF(lp, x) SMC_SET_MAC_CSR( (lp), WUFF, x ) -#define SMC_GET_WUCSR(lp, x) SMC_GET_MAC_CSR( (lp), WUCSR, x ) -#define SMC_SET_WUCSR(lp, x) SMC_SET_MAC_CSR( (lp), WUCSR, x ) - -/* PHY register read/write macros */ -#define SMC_GET_MII(lp,a,phy,v) \ - do { \ - u32 __v; \ - do { \ - SMC_GET_MII_ACC((lp), __v); \ - } while ( __v & MII_ACC_MII_BUSY_ ); \ - SMC_SET_MII_ACC( (lp), ((phy)<<11) | ((a)<<6) | \ - MII_ACC_MII_BUSY_); \ - do { \ - SMC_GET_MII_ACC( (lp), __v); \ - } while ( __v & MII_ACC_MII_BUSY_ ); \ - SMC_GET_MII_DATA((lp), v); \ - } while (0) -#define SMC_SET_MII(lp,a,phy,v) \ - do { \ - u32 __v; \ - do { \ - SMC_GET_MII_ACC((lp), __v); \ - } while ( __v & MII_ACC_MII_BUSY_ ); \ - SMC_SET_MII_DATA((lp), v); \ - SMC_SET_MII_ACC( (lp), ((phy)<<11) | ((a)<<6) | \ - MII_ACC_MII_BUSY_ | \ - MII_ACC_MII_WRITE_ ); \ - do { \ - SMC_GET_MII_ACC((lp), __v); \ - } while ( __v & MII_ACC_MII_BUSY_ ); \ - } while (0) -#define SMC_GET_PHY_BMCR(lp,phy,x) SMC_GET_MII( (lp), MII_BMCR, phy, x ) -#define SMC_SET_PHY_BMCR(lp,phy,x) SMC_SET_MII( (lp), MII_BMCR, phy, x ) -#define SMC_GET_PHY_BMSR(lp,phy,x) SMC_GET_MII( (lp), MII_BMSR, phy, x ) -#define SMC_GET_PHY_ID1(lp,phy,x) SMC_GET_MII( (lp), MII_PHYSID1, phy, x ) -#define SMC_GET_PHY_ID2(lp,phy,x) SMC_GET_MII( (lp), MII_PHYSID2, phy, x ) -#define SMC_GET_PHY_MII_ADV(lp,phy,x) SMC_GET_MII( (lp), MII_ADVERTISE, phy, x ) -#define SMC_SET_PHY_MII_ADV(lp,phy,x) SMC_SET_MII( (lp), MII_ADVERTISE, phy, x ) -#define SMC_GET_PHY_MII_LPA(lp,phy,x) SMC_GET_MII( (lp), MII_LPA, phy, x ) -#define SMC_SET_PHY_MII_LPA(lp,phy,x) SMC_SET_MII( (lp), MII_LPA, phy, x ) -#define SMC_GET_PHY_CTRL_STS(lp,phy,x) SMC_GET_MII( (lp), PHY_MODE_CTRL_STS, phy, x ) -#define SMC_SET_PHY_CTRL_STS(lp,phy,x) SMC_SET_MII( (lp), PHY_MODE_CTRL_STS, phy, x ) -#define SMC_GET_PHY_INT_SRC(lp,phy,x) SMC_GET_MII( (lp), PHY_INT_SRC, phy, x ) -#define SMC_SET_PHY_INT_SRC(lp,phy,x) SMC_SET_MII( (lp), PHY_INT_SRC, phy, x ) -#define SMC_GET_PHY_INT_MASK(lp,phy,x) SMC_GET_MII( (lp), PHY_INT_MASK, phy, x ) -#define SMC_SET_PHY_INT_MASK(lp,phy,x) SMC_SET_MII( (lp), PHY_INT_MASK, phy, x ) -#define SMC_GET_PHY_SPECIAL(lp,phy,x) SMC_GET_MII( (lp), PHY_SPECIAL, phy, x ) - - - -/* Misc read/write macros */ - -#ifndef SMC_GET_MAC_ADDR -#define SMC_GET_MAC_ADDR(lp, addr) \ - do { \ - unsigned int __v; \ - \ - SMC_GET_MAC_CSR((lp), ADDRL, __v); \ - addr[0] = __v; addr[1] = __v >> 8; \ - addr[2] = __v >> 16; addr[3] = __v >> 24; \ - SMC_GET_MAC_CSR((lp), ADDRH, __v); \ - addr[4] = __v; addr[5] = __v >> 8; \ - } while (0) -#endif - -#define SMC_SET_MAC_ADDR(lp, addr) \ - do { \ - SMC_SET_MAC_CSR((lp), ADDRL, \ - addr[0] | \ - (addr[1] << 8) | \ - (addr[2] << 16) | \ - (addr[3] << 24)); \ - SMC_SET_MAC_CSR((lp), ADDRH, addr[4]|(addr[5] << 8));\ - } while (0) - - -#define SMC_WRITE_EEPROM_CMD(lp, cmd, addr) \ - do { \ - while (SMC_GET_E2P_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ - SMC_SET_MAC_CMD((lp), MAC_CSR_CMD_R_NOT_W_ | a ); \ - while (SMC_GET_MAC_CMD((lp)) & MAC_CSR_CMD_CSR_BUSY_); \ - } while (0) - -#endif /* _SMC911X_H_ */ diff --git a/include/linux/smc911x.h b/include/linux/smc911x.h deleted file mode 100644 index 8cace8189e74..000000000000 --- a/include/linux/smc911x.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __SMC911X_H__ -#define __SMC911X_H__ - -#define SMC911X_USE_16BIT (1 << 0) -#define SMC911X_USE_32BIT (1 << 1) - -struct smc911x_platdata { - unsigned long flags; - unsigned long irq_flags; /* IRQF_... */ - int irq_polarity; -}; - -#endif /* __SMC911X_H__ */