@@ -1979,6 +1979,10 @@ static void xgbe_phy_rx_reset(struct xgbe_prv_data *pdata)
static void xgbe_phy_pll_ctrl(struct xgbe_prv_data *pdata, bool enable)
{
+ /* PLL_CTRL feature needs to be enabled for fixed PHY modes (Non-Autoneg) only */
+ if (pdata->phy.autoneg != AUTONEG_DISABLE)
+ return;
+
XMDIO_WRITE_BITS(pdata, MDIO_MMD_PMAPMD, MDIO_VEND2_PMA_MISC_CTRL0,
XGBE_PMA_PLL_CTRL_MASK,
enable ? XGBE_PMA_PLL_CTRL_ENABLE
@@ -2029,8 +2033,10 @@ static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
xgbe_phy_rx_reset(pdata);
reenable_pll:
- /* Enable PLL re-initialization */
- xgbe_phy_pll_ctrl(pdata, true);
+ /* Enable PLL re-initialization, not needed for PHY Power Off and RRC cmds */
+ if (cmd != XGBE_MB_CMD_POWER_OFF &&
+ cmd != XGBE_MB_CMD_RRC)
+ xgbe_phy_pll_ctrl(pdata, true);
}
static void xgbe_phy_rrc(struct xgbe_prv_data *pdata)
PLL control setting(RRC) is needed only in fixed PHY configuration to fix the peer-peer issues. Without the PLL control setting, the link up takes longer time in a fixed phy configuration. Driver implements SW RRC for Autoneg On configuration, hence PLL control setting (RRC) is not needed for AN On configuration, and can be skipped. Also, PLL re-initialization is not needed for PHY Power Off and RRC commands. Otherwise, they lead to mailbox errors. Added the changes accordingly. Fixes: daf182d360e5 ("net: amd-xgbe: Toggle PLL settings during rate change") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> --- Changes since v2: - update the POWER_OFF and RRC enumerations - updated the commit message to use RRC instead of RRCM Changes since v1: - used enums for all mailxbox command and subcommands, pre-patch to this contains the enum updates - updated the comment section to include RRC command - updated the commit message to use RRC instead of RRCM drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)