@@ -73,6 +73,433 @@ int wx_check_flash_load(struct wx_hw *hw, u32 check_bit)
}
EXPORT_SYMBOL(wx_check_flash_load);
+void wx_control_hw(struct wx_hw *wxhw, bool drv)
+{
+ if (drv) {
+ /* Let firmware know the driver has taken over */
+ wr32m(wxhw, WX_CFG_PORT_CTL,
+ WX_CFG_PORT_CTL_DRV_LOAD, WX_CFG_PORT_CTL_DRV_LOAD);
+ } else {
+ /* Let firmware take over control of hw */
+ wr32m(wxhw, WX_CFG_PORT_CTL,
+ WX_CFG_PORT_CTL_DRV_LOAD, 0);
+ }
+}
+EXPORT_SYMBOL(wx_control_hw);
+
+/**
+ * wx_mng_present - returns 0 when management capability is present
+ * @wxhw: pointer to hardware structure
+ */
+int wx_mng_present(struct wx_hw *wxhw)
+{
+ u32 fwsm;
+
+ fwsm = rd32(wxhw, WX_MIS_ST);
+ if (fwsm & WX_MIS_ST_MNG_INIT_DN)
+ return 0;
+ else
+ return -EACCES;
+}
+EXPORT_SYMBOL(wx_mng_present);
+
+/* Software lock to be held while software semaphore is being accessed. */
+static DEFINE_MUTEX(wx_sw_sync_lock);
+
+/**
+ * wx_release_sw_sync - Release SW semaphore
+ * @wxhw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SW semaphore for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+static void wx_release_sw_sync(struct wx_hw *wxhw, u32 mask)
+{
+ mutex_lock(&wx_sw_sync_lock);
+ wr32m(wxhw, WX_MNG_SWFW_SYNC, mask, 0);
+ mutex_unlock(&wx_sw_sync_lock);
+}
+
+/**
+ * wx_acquire_sw_sync - Acquire SW semaphore
+ * @wxhw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SW semaphore for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+static int wx_acquire_sw_sync(struct wx_hw *wxhw, u32 mask)
+{
+ u32 sem = 0;
+ int ret = 0;
+
+ mutex_lock(&wx_sw_sync_lock);
+ ret = read_poll_timeout(rd32, sem, !(sem & mask),
+ 5000, 2000000, false, wxhw, WX_MNG_SWFW_SYNC);
+ if (!ret) {
+ sem |= mask;
+ wr32(wxhw, WX_MNG_SWFW_SYNC, sem);
+ } else {
+ wx_err(wxhw, "SW Semaphore not granted: 0x%x.\n", sem);
+ }
+ mutex_unlock(&wx_sw_sync_lock);
+
+ return ret;
+}
+
+/**
+ * wx_host_interface_command - Issue command to manageability block
+ * @wxhw: pointer to the HW structure
+ * @buffer: contains the command to write and where the return status will
+ * be placed
+ * @length: length of buffer, must be multiple of 4 bytes
+ * @timeout: time in ms to wait for command completion
+ * @return_data: read and return data from the buffer (true) or not (false)
+ * Needed because FW structures are big endian and decoding of
+ * these fields can be 8 bit or 16 bit based on command. Decoding
+ * is not easily understood without making a table of commands.
+ * So we will leave this up to the caller to read back the data
+ * in these cases.
+ **/
+static int wx_host_interface_command(struct wx_hw *wxhw, u32 *buffer,
+ u32 length, u32 timeout, bool return_data)
+{
+ u32 hdr_size = sizeof(struct wx_hic_hdr);
+ u32 hicr, i, bi, buf[64] = {};
+ int status = 0;
+ u32 dword_len;
+ u16 buf_len;
+
+ if (length == 0 || length > WX_HI_MAX_BLOCK_BYTE_LENGTH) {
+ wx_err(wxhw, "Buffer length failure buffersize=%d.\n", length);
+ return -EINVAL;
+ }
+
+ status = wx_acquire_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_MB);
+ if (status != 0)
+ return status;
+
+ /* Calculate length in DWORDs. We must be DWORD aligned */
+ if ((length % (sizeof(u32))) != 0) {
+ wx_err(wxhw, "Buffer length failure, not aligned to dword");
+ status = -EINVAL;
+ goto rel_out;
+ }
+
+ dword_len = length >> 2;
+
+ /* The device driver writes the relevant command block
+ * into the ram area.
+ */
+ for (i = 0; i < dword_len; i++) {
+ wr32a(wxhw, WX_MNG_MBOX, i, (__force u32)cpu_to_le32(buffer[i]));
+ /* write flush */
+ buf[i] = rd32a(wxhw, WX_MNG_MBOX, i);
+ }
+ /* Setting this bit tells the ARC that a new command is pending. */
+ wr32m(wxhw, WX_MNG_MBOX_CTL,
+ WX_MNG_MBOX_CTL_SWRDY, WX_MNG_MBOX_CTL_SWRDY);
+
+ status = read_poll_timeout(rd32, hicr, hicr & WX_MNG_MBOX_CTL_FWRDY, 1000,
+ timeout * 1000, false, wxhw, WX_MNG_MBOX_CTL);
+ if (status)
+ goto rel_out;
+
+ /* Check command completion */
+ if (status) {
+ wx_dbg(wxhw, "Command has failed with no status valid.\n");
+
+ buf[0] = rd32(wxhw, WX_MNG_MBOX);
+ if ((buffer[0] & 0xff) != (~buf[0] >> 24)) {
+ status = -EINVAL;
+ goto rel_out;
+ }
+ if ((buf[0] & 0xff0000) >> 16 == 0x80) {
+ wx_dbg(wxhw, "It's unknown cmd.\n");
+ status = -EINVAL;
+ goto rel_out;
+ }
+
+ wx_dbg(wxhw, "write value:\n");
+ for (i = 0; i < dword_len; i++)
+ wx_dbg(wxhw, "%x ", buffer[i]);
+ wx_dbg(wxhw, "read value:\n");
+ for (i = 0; i < dword_len; i++)
+ wx_dbg(wxhw, "%x ", buf[i]);
+ }
+
+ if (!return_data)
+ goto rel_out;
+
+ /* Calculate length in DWORDs */
+ dword_len = hdr_size >> 2;
+
+ /* first pull in the header so we know the buffer length */
+ for (bi = 0; bi < dword_len; bi++) {
+ buffer[bi] = rd32a(wxhw, WX_MNG_MBOX, bi);
+ le32_to_cpus(&buffer[bi]);
+ }
+
+ /* If there is any thing in data position pull it in */
+ buf_len = ((struct wx_hic_hdr *)buffer)->buf_len;
+ if (buf_len == 0)
+ goto rel_out;
+
+ if (length < buf_len + hdr_size) {
+ wx_err(wxhw, "Buffer not large enough for reply message.\n");
+ status = -EFAULT;
+ goto rel_out;
+ }
+
+ /* Calculate length in DWORDs, add 3 for odd lengths */
+ dword_len = (buf_len + 3) >> 2;
+
+ /* Pull in the rest of the buffer (bi is where we left off) */
+ for (; bi <= dword_len; bi++) {
+ buffer[bi] = rd32a(wxhw, WX_MNG_MBOX, bi);
+ le32_to_cpus(&buffer[bi]);
+ }
+
+rel_out:
+ wx_release_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_MB);
+ return status;
+}
+
+/**
+ * wx_read_ee_hostif_data - Read EEPROM word using a host interface cmd
+ * assuming that the semaphore is already obtained.
+ * @wxhw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+static int wx_read_ee_hostif_data(struct wx_hw *wxhw, u16 offset, u16 *data)
+{
+ struct wx_hic_read_shadow_ram buffer;
+ int status;
+
+ buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ buffer.address = (__force u32)cpu_to_be32(offset * 2);
+ /* one word */
+ buffer.length = (__force u16)cpu_to_be16(sizeof(u16));
+
+ status = wx_host_interface_command(wxhw, (u32 *)&buffer, sizeof(buffer),
+ WX_HI_COMMAND_TIMEOUT, false);
+
+ if (status != 0)
+ return status;
+
+ *data = (u16)rd32a(wxhw, WX_MNG_MBOX, FW_NVM_DATA_OFFSET);
+
+ return status;
+}
+
+/**
+ * wx_read_ee_hostif - Read EEPROM word using a host interface cmd
+ * @wxhw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the hostif.
+ **/
+int wx_read_ee_hostif(struct wx_hw *wxhw, u16 offset, u16 *data)
+{
+ int status = 0;
+
+ status = wx_acquire_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_FLASH);
+ if (status == 0) {
+ status = wx_read_ee_hostif_data(wxhw, offset, data);
+ wx_release_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_FLASH);
+ }
+
+ return status;
+}
+EXPORT_SYMBOL(wx_read_ee_hostif);
+
+/**
+ * wx_read_ee_hostif_buffer- Read EEPROM word(s) using hostif
+ * @wxhw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the hostif.
+ **/
+int wx_read_ee_hostif_buffer(struct wx_hw *wxhw,
+ u16 offset, u16 words, u16 *data)
+{
+ struct wx_hic_read_shadow_ram buffer;
+ u32 current_word = 0;
+ u16 words_to_read;
+ u32 value = 0;
+ int status;
+ u32 i;
+
+ /* Take semaphore for the entire operation. */
+ status = wx_acquire_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_FLASH);
+ if (status != 0)
+ return status;
+
+ while (words) {
+ if (words > FW_MAX_READ_BUFFER_SIZE / 2)
+ words_to_read = FW_MAX_READ_BUFFER_SIZE / 2;
+ else
+ words_to_read = words;
+
+ buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ buffer.address = (__force u32)cpu_to_be32((offset + current_word) * 2);
+ buffer.length = (__force u16)cpu_to_be16(words_to_read * 2);
+
+ status = wx_host_interface_command(wxhw, (u32 *)&buffer,
+ sizeof(buffer),
+ WX_HI_COMMAND_TIMEOUT,
+ false);
+
+ if (status != 0) {
+ wx_err(wxhw, "Host interface command failed\n");
+ goto out;
+ }
+
+ for (i = 0; i < words_to_read; i++) {
+ u32 reg = WX_MNG_MBOX + (FW_NVM_DATA_OFFSET << 2) + 2 * i;
+
+ value = rd32(wxhw, reg);
+ data[current_word] = (u16)(value & 0xffff);
+ current_word++;
+ i++;
+ if (i < words_to_read) {
+ value >>= 16;
+ data[current_word] = (u16)(value & 0xffff);
+ current_word++;
+ }
+ }
+ words -= words_to_read;
+ }
+
+out:
+ wx_release_sw_sync(wxhw, WX_MNG_SWFW_SYNC_SW_FLASH);
+ return status;
+}
+EXPORT_SYMBOL(wx_read_ee_hostif_buffer);
+
+/**
+ * wx_calculate_checksum - Calculate checksum for buffer
+ * @buffer: pointer to EEPROM
+ * @length: size of EEPROM to calculate a checksum for
+ * Calculates the checksum for some buffer on a specified length. The
+ * checksum calculated is returned.
+ **/
+static u8 wx_calculate_checksum(u8 *buffer, u32 length)
+{
+ u8 sum = 0;
+ u32 i;
+
+ if (!buffer)
+ return 0;
+
+ for (i = 0; i < length; i++)
+ sum += buffer[i];
+
+ return (u8)(0 - sum);
+}
+
+/**
+ * wx_reset_hostif - send reset cmd to fw
+ * @wxhw: pointer to hardware structure
+ *
+ * Sends reset cmd to firmware through the manageability
+ * block.
+ **/
+int wx_reset_hostif(struct wx_hw *wxhw)
+{
+ struct wx_hic_reset reset_cmd;
+ int ret_val = 0;
+ int i;
+
+ reset_cmd.hdr.cmd = FW_RESET_CMD;
+ reset_cmd.hdr.buf_len = FW_RESET_LEN;
+ reset_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+ reset_cmd.lan_id = wxhw->bus.func;
+ reset_cmd.reset_type = (u16)wxhw->reset_type;
+ reset_cmd.hdr.checksum = 0;
+ reset_cmd.hdr.checksum = wx_calculate_checksum((u8 *)&reset_cmd,
+ (FW_CEM_HDR_LEN +
+ reset_cmd.hdr.buf_len));
+
+ for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+ ret_val = wx_host_interface_command(wxhw, (u32 *)&reset_cmd,
+ sizeof(reset_cmd),
+ WX_HI_COMMAND_TIMEOUT,
+ true);
+ if (ret_val != 0)
+ continue;
+
+ if (reset_cmd.hdr.cmd_or_resp.ret_status ==
+ FW_CEM_RESP_STATUS_SUCCESS)
+ ret_val = 0;
+ else
+ ret_val = -EFAULT;
+
+ break;
+ }
+
+ return ret_val;
+}
+EXPORT_SYMBOL(wx_reset_hostif);
+
+/**
+ * wx_init_eeprom_params - Initialize EEPROM params
+ * @wxhw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters wx_eeprom_info within the
+ * wx_hw struct in order to set up EEPROM access.
+ **/
+void wx_init_eeprom_params(struct wx_hw *wxhw)
+{
+ struct wx_eeprom_info *eeprom = &wxhw->eeprom;
+ u16 eeprom_size;
+ u16 data = 0x80;
+
+ if (eeprom->type == wx_eeprom_uninitialized) {
+ eeprom->semaphore_delay = 10;
+ eeprom->type = wx_eeprom_none;
+
+ if (!(rd32(wxhw, WX_SPI_STATUS) &
+ WX_SPI_STATUS_FLASH_BYPASS)) {
+ eeprom->type = wx_flash;
+
+ eeprom_size = 4096;
+ eeprom->word_size = eeprom_size >> 1;
+
+ wx_dbg(wxhw, "Eeprom params: type = %d, size = %d\n",
+ eeprom->type, eeprom->word_size);
+ }
+ }
+
+ if (wxhw->mac.type == wx_mac_sp) {
+ if (wx_read_ee_hostif(wxhw, WX_SW_REGION_PTR, &data)) {
+ wx_err(wxhw, "NVM Read Error\n");
+ return;
+ }
+ data = data >> 1;
+ }
+
+ eeprom->sw_region_offset = data;
+}
+EXPORT_SYMBOL(wx_init_eeprom_params);
+
/**
* wx_get_mac_addr - Generic get MAC address
* @wxhw: pointer to hardware structure
@@ -5,6 +5,13 @@
#define _WX_HW_H_
int wx_check_flash_load(struct wx_hw *hw, u32 check_bit);
+void wx_control_hw(struct wx_hw *wxhw, bool drv);
+int wx_mng_present(struct wx_hw *wxhw);
+int wx_read_ee_hostif(struct wx_hw *wxhw, u16 offset, u16 *data);
+int wx_read_ee_hostif_buffer(struct wx_hw *wxhw,
+ u16 offset, u16 words, u16 *data);
+int wx_reset_hostif(struct wx_hw *wxhw);
+void wx_init_eeprom_params(struct wx_hw *wxhw);
void wx_get_mac_addr(struct wx_hw *wxhw, u8 *mac_addr);
int wx_set_rar(struct wx_hw *wxhw, u32 index, u8 *addr, u64 pools, u32 enable_addr);
int wx_clear_rar(struct wx_hw *wxhw, u32 index);
@@ -19,6 +19,11 @@
#define WX_MIS_PWR 0x10000
#define WX_MIS_RST 0x1000C
#define WX_MIS_RST_LAN_RST(_i) BIT((_i) + 1)
+#define WX_MIS_RST_SW_RST BIT(0)
+#define WX_MIS_ST 0x10028
+#define WX_MIS_ST_MNG_INIT_DN BIT(0)
+#define WX_MIS_SWSM 0x1002C
+#define WX_MIS_SWSM_SMBI BIT(0)
#define WX_MIS_RST_ST 0x10030
#define WX_MIS_RST_ST_RST_INI_SHIFT 8
#define WX_MIS_RST_ST_RST_INIT (0xFF << WX_MIS_RST_ST_RST_INI_SHIFT)
@@ -51,6 +56,11 @@
#define WX_TS_ALARM_ST_DALARM BIT(1)
#define WX_TS_ALARM_ST_ALARM BIT(0)
+/************************* Port Registers ************************************/
+/* port cfg Registers */
+#define WX_CFG_PORT_CTL 0x14400
+#define WX_CFG_PORT_CTL_DRV_LOAD BIT(3)
+
/*********************** Transmit DMA registers **************************/
/* transmit global control */
#define WX_TDM_CTL 0x18000
@@ -107,6 +117,15 @@
#define WX_PSR_MAC_SWC_IDX 0x16210
#define WX_CLEAR_VMDQ_ALL 0xFFFFFFFFU
+/************************************** MNG ********************************/
+#define WX_MNG_SWFW_SYNC 0x1E008
+#define WX_MNG_SWFW_SYNC_SW_MB BIT(2)
+#define WX_MNG_SWFW_SYNC_SW_FLASH BIT(3)
+#define WX_MNG_MBOX 0x1E100
+#define WX_MNG_MBOX_CTL 0x1E044
+#define WX_MNG_MBOX_CTL_SWRDY BIT(0)
+#define WX_MNG_MBOX_CTL_FWRDY BIT(2)
+
/************************************* ETH MAC *****************************/
#define WX_MAC_TX_CFG 0x11000
#define WX_MAC_TX_CFG_TE BIT(0)
@@ -144,6 +163,70 @@
/* Number of 80 microseconds we wait for PCI Express master disable */
#define WX_PCI_MASTER_DISABLE_TIMEOUT 80000
+/****************** Manageablility Host Interface defines ********************/
+#define WX_HI_MAX_BLOCK_BYTE_LENGTH 256 /* Num of bytes in range */
+#define WX_HI_COMMAND_TIMEOUT 1000 /* Process HI command limit */
+
+#define FW_READ_SHADOW_RAM_CMD 0x31
+#define FW_READ_SHADOW_RAM_LEN 0x6
+#define FW_DEFAULT_CHECKSUM 0xFF /* checksum always 0xFF */
+#define FW_NVM_DATA_OFFSET 3
+#define FW_MAX_READ_BUFFER_SIZE 244
+#define FW_RESET_CMD 0xDF
+#define FW_RESET_LEN 0x2
+#define FW_CEM_HDR_LEN 0x4
+#define FW_CEM_CMD_RESERVED 0X0
+#define FW_CEM_MAX_RETRIES 3
+#define FW_CEM_RESP_STATUS_SUCCESS 0x1
+
+#define WX_SW_REGION_PTR 0x1C
+
+/* Host Interface Command Structures */
+struct wx_hic_hdr {
+ u8 cmd;
+ u8 buf_len;
+ union {
+ u8 cmd_resv;
+ u8 ret_status;
+ } cmd_or_resp;
+ u8 checksum;
+};
+
+struct wx_hic_hdr2_req {
+ u8 cmd;
+ u8 buf_lenh;
+ u8 buf_lenl;
+ u8 checksum;
+};
+
+struct wx_hic_hdr2_rsp {
+ u8 cmd;
+ u8 buf_lenl;
+ u8 buf_lenh_status; /* 7-5: high bits of buf_len, 4-0: status */
+ u8 checksum;
+};
+
+union wx_hic_hdr2 {
+ struct wx_hic_hdr2_req req;
+ struct wx_hic_hdr2_rsp rsp;
+};
+
+/* These need to be dword aligned */
+struct wx_hic_read_shadow_ram {
+ union wx_hic_hdr2 hdr;
+ u32 address;
+ u16 length;
+ u16 pad2;
+ u16 data;
+ u16 pad3;
+};
+
+struct wx_hic_reset {
+ struct wx_hic_hdr hdr;
+ u16 lan_id;
+ u16 reset_type;
+};
+
/* Bus parameters */
struct wx_bus_info {
u8 func;
@@ -175,17 +258,38 @@ struct wx_mac_info {
struct wx_thermal_sensor_data sensor;
};
+enum wx_eeprom_type {
+ wx_eeprom_uninitialized = 0,
+ wx_eeprom_spi,
+ wx_flash,
+ wx_eeprom_none /* No NVM support */
+};
+
+struct wx_eeprom_info {
+ enum wx_eeprom_type type;
+ u32 semaphore_delay;
+ u16 word_size;
+ u16 sw_region_offset;
+};
+
struct wx_addr_filter_info {
u32 num_mc_addrs;
u32 mta_in_use;
bool user_set_promisc;
};
+enum wx_reset_type {
+ WX_LAN_RESET = 0,
+ WX_SW_RESET,
+ WX_GLOBAL_RESET
+};
+
struct wx_hw {
u8 __iomem *hw_addr;
struct pci_dev *pdev;
struct wx_bus_info bus;
struct wx_mac_info mac;
+ struct wx_eeprom_info eeprom;
struct wx_addr_filter_info addr_ctrl;
u16 device_id;
u16 vendor_id;
@@ -195,6 +299,7 @@ struct wx_hw {
u16 oem_ssid;
u16 oem_svid;
bool adapter_stopped;
+ enum wx_reset_type reset_type;
};
#define WX_INTR_ALL (~0ULL)
@@ -202,6 +307,10 @@ struct wx_hw {
/* register operations */
#define wr32(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
#define rd32(a, reg) readl((a)->hw_addr + (reg))
+#define rd32a(a, reg, offset) ( \
+ rd32((a), (reg) + ((offset) << 2)))
+#define wr32a(a, reg, off, val) \
+ wr32((a), (reg) + ((off) << 2), (val))
static inline u32
rd32m(struct wx_hw *wxhw, u32 reg, u32 mask)