Message ID | 20221202045743.2639466-4-irogers@google.com (mailing list archive) |
---|---|
State | Not Applicable |
Delegated to: | BPF |
Headers | show |
Series | Improvements to incremental builds | expand |
On Thu, Dec 01, 2022 at 08:57:41PM -0800 Ian Rogers wrote: > Compute the headers to be installed from their source headers and make > each have its own build target to install it. Using dependencies > avoids headers being reinstalled and getting a new timestamp which > then causes files that depend on the header to be rebuilt. > > Signed-off-by: Ian Rogers <irogers@google.com> > --- > tools/lib/subcmd/Makefile | 23 +++++++++++++---------- > 1 file changed, 13 insertions(+), 10 deletions(-) > > diff --git a/tools/lib/subcmd/Makefile b/tools/lib/subcmd/Makefile > index 9a316d8b89df..b87213263a5e 100644 > --- a/tools/lib/subcmd/Makefile > +++ b/tools/lib/subcmd/Makefile > @@ -89,10 +89,10 @@ define do_install_mkdir > endef > > define do_install > - if [ ! -d '$(DESTDIR_SQ)$2' ]; then \ > - $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$2'; \ > + if [ ! -d '$2' ]; then \ > + $(INSTALL) -d -m 755 '$2'; \ > fi; \ > - $(INSTALL) $1 $(if $3,-m $3,) '$(DESTDIR_SQ)$2' > + $(INSTALL) $1 $(if $3,-m $3,) '$2' What about using '$(INSTALL) -D ...' instead of the if-mkdir-block above? (E.g. as in tools/debugging/Makefile.) Kind regards, Nicolas > endef > > install_lib: $(LIBFILE) > @@ -100,13 +100,16 @@ install_lib: $(LIBFILE) > $(call do_install_mkdir,$(libdir_SQ)); \ > cp -fpR $(LIBFILE) $(DESTDIR)$(libdir_SQ) > > -install_headers: > - $(call QUIET_INSTALL, libsubcmd_headers) \ > - $(call do_install,exec-cmd.h,$(prefix)/include/subcmd,644); \ > - $(call do_install,help.h,$(prefix)/include/subcmd,644); \ > - $(call do_install,pager.h,$(prefix)/include/subcmd,644); \ > - $(call do_install,parse-options.h,$(prefix)/include/subcmd,644); \ > - $(call do_install,run-command.h,$(prefix)/include/subcmd,644); > +HDRS := exec-cmd.h help.h pager.h parse-options.h run-command.h > +INSTALL_HDRS_PFX := $(DESTDIR)$(prefix)/include/subcmd > +INSTALL_HDRS := $(addprefix $(INSTALL_HDRS_PFX)/, $(HDRS)) > + > +$(INSTALL_HDRS): $(INSTALL_HDRS_PFX)/%.h: %.h > + $(call QUIET_INSTALL, $@) \ > + $(call do_install,$<,$(INSTALL_HDRS_PFX)/,644) > + > +install_headers: $(INSTALL_HDRS) > + $(call QUIET_INSTALL, libsubcmd_headers) > > install: install_lib install_headers > > -- > 2.39.0.rc0.267.gcb52ba06e7-goog
On Mon, Dec 12, 2022 at 12:57 PM Nicolas Schier <nicolas@fjasle.eu> wrote: > > On Thu, Dec 01, 2022 at 08:57:41PM -0800 Ian Rogers wrote: > > Compute the headers to be installed from their source headers and make > > each have its own build target to install it. Using dependencies > > avoids headers being reinstalled and getting a new timestamp which > > then causes files that depend on the header to be rebuilt. > > > > Signed-off-by: Ian Rogers <irogers@google.com> > > --- > > tools/lib/subcmd/Makefile | 23 +++++++++++++---------- > > 1 file changed, 13 insertions(+), 10 deletions(-) > > > > diff --git a/tools/lib/subcmd/Makefile b/tools/lib/subcmd/Makefile > > index 9a316d8b89df..b87213263a5e 100644 > > --- a/tools/lib/subcmd/Makefile > > +++ b/tools/lib/subcmd/Makefile > > @@ -89,10 +89,10 @@ define do_install_mkdir > > endef > > > > define do_install > > - if [ ! -d '$(DESTDIR_SQ)$2' ]; then \ > > - $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$2'; \ > > + if [ ! -d '$2' ]; then \ > > + $(INSTALL) -d -m 755 '$2'; \ > > fi; \ > > - $(INSTALL) $1 $(if $3,-m $3,) '$(DESTDIR_SQ)$2' > > + $(INSTALL) $1 $(if $3,-m $3,) '$2' > > What about using '$(INSTALL) -D ...' instead of the if-mkdir-block above? > (E.g. as in tools/debugging/Makefile.) > > Kind regards, > Nicolas Thanks Nicolas, the reason was to keep the code consistent. That's not to say this is the best approach. For example, here is the same thing for tools/lib/api: https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/api/Makefile?h=perf/core&id=f43368371888694a2eceaaad8f5e9775c092009a#n84 If you'd like to improve this in all the versions and send patches I'd be happy to take a look. Thanks, Ian > > endef > > > > install_lib: $(LIBFILE) > > @@ -100,13 +100,16 @@ install_lib: $(LIBFILE) > > $(call do_install_mkdir,$(libdir_SQ)); \ > > cp -fpR $(LIBFILE) $(DESTDIR)$(libdir_SQ) > > > > -install_headers: > > - $(call QUIET_INSTALL, libsubcmd_headers) \ > > - $(call do_install,exec-cmd.h,$(prefix)/include/subcmd,644); \ > > - $(call do_install,help.h,$(prefix)/include/subcmd,644); \ > > - $(call do_install,pager.h,$(prefix)/include/subcmd,644); \ > > - $(call do_install,parse-options.h,$(prefix)/include/subcmd,644); \ > > - $(call do_install,run-command.h,$(prefix)/include/subcmd,644); > > +HDRS := exec-cmd.h help.h pager.h parse-options.h run-command.h > > +INSTALL_HDRS_PFX := $(DESTDIR)$(prefix)/include/subcmd > > +INSTALL_HDRS := $(addprefix $(INSTALL_HDRS_PFX)/, $(HDRS)) > > + > > +$(INSTALL_HDRS): $(INSTALL_HDRS_PFX)/%.h: %.h > > + $(call QUIET_INSTALL, $@) \ > > + $(call do_install,$<,$(INSTALL_HDRS_PFX)/,644) > > + > > +install_headers: $(INSTALL_HDRS) > > + $(call QUIET_INSTALL, libsubcmd_headers) > > > > install: install_lib install_headers > > > > -- > > 2.39.0.rc0.267.gcb52ba06e7-goog > > -- > epost|xmpp: nicolas@fjasle.eu irc://oftc.net/nsc > ↳ gpg: 18ed 52db e34f 860e e9fb c82b 7d97 0932 55a0 ce7f > -- frykten for herren er opphav til kunnskap --
On Tue 13 Dec 2022 13:28:21 GMT, Ian Rogers wrote: > On Mon, Dec 12, 2022 at 12:57 PM Nicolas Schier <nicolas@fjasle.eu> wrote: > > > > On Thu, Dec 01, 2022 at 08:57:41PM -0800 Ian Rogers wrote: > > > Compute the headers to be installed from their source headers and make > > > each have its own build target to install it. Using dependencies > > > avoids headers being reinstalled and getting a new timestamp which > > > then causes files that depend on the header to be rebuilt. > > > > > > Signed-off-by: Ian Rogers <irogers@google.com> > > > --- > > > tools/lib/subcmd/Makefile | 23 +++++++++++++---------- > > > 1 file changed, 13 insertions(+), 10 deletions(-) > > > > > > diff --git a/tools/lib/subcmd/Makefile b/tools/lib/subcmd/Makefile > > > index 9a316d8b89df..b87213263a5e 100644 > > > --- a/tools/lib/subcmd/Makefile > > > +++ b/tools/lib/subcmd/Makefile > > > @@ -89,10 +89,10 @@ define do_install_mkdir > > > endef > > > > > > define do_install > > > - if [ ! -d '$(DESTDIR_SQ)$2' ]; then \ > > > - $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$2'; \ > > > + if [ ! -d '$2' ]; then \ > > > + $(INSTALL) -d -m 755 '$2'; \ > > > fi; \ > > > - $(INSTALL) $1 $(if $3,-m $3,) '$(DESTDIR_SQ)$2' > > > + $(INSTALL) $1 $(if $3,-m $3,) '$2' > > > > What about using '$(INSTALL) -D ...' instead of the if-mkdir-block above? > > (E.g. as in tools/debugging/Makefile.) > > > > Kind regards, > > Nicolas > > Thanks Nicolas, the reason was to keep the code consistent. That's not > to say this is the best approach. For example, here is the same thing > for tools/lib/api: > https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/api/Makefile?h=perf/core&id=f43368371888694a2eceaaad8f5e9775c092009a#n84 > > If you'd like to improve this in all the versions and send patches I'd > be happy to take a look. > > Thanks, > Ian Ian, while watching at tools/lib/*/Makefile I stumple across the special single-quote handling (e.g. 'DESTDIR_SQ') several times. Top-level Makefile and kbuild are not designed to work with file or directory names containing spaces. Do you know whether this is needed for the installation rules in tools/lib/? I'd like to remove support for path names with spaces for a increasing simplicity and consistency. Kind regards, Nicolas
diff --git a/tools/lib/subcmd/Makefile b/tools/lib/subcmd/Makefile index 9a316d8b89df..b87213263a5e 100644 --- a/tools/lib/subcmd/Makefile +++ b/tools/lib/subcmd/Makefile @@ -89,10 +89,10 @@ define do_install_mkdir endef define do_install - if [ ! -d '$(DESTDIR_SQ)$2' ]; then \ - $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$2'; \ + if [ ! -d '$2' ]; then \ + $(INSTALL) -d -m 755 '$2'; \ fi; \ - $(INSTALL) $1 $(if $3,-m $3,) '$(DESTDIR_SQ)$2' + $(INSTALL) $1 $(if $3,-m $3,) '$2' endef install_lib: $(LIBFILE) @@ -100,13 +100,16 @@ install_lib: $(LIBFILE) $(call do_install_mkdir,$(libdir_SQ)); \ cp -fpR $(LIBFILE) $(DESTDIR)$(libdir_SQ) -install_headers: - $(call QUIET_INSTALL, libsubcmd_headers) \ - $(call do_install,exec-cmd.h,$(prefix)/include/subcmd,644); \ - $(call do_install,help.h,$(prefix)/include/subcmd,644); \ - $(call do_install,pager.h,$(prefix)/include/subcmd,644); \ - $(call do_install,parse-options.h,$(prefix)/include/subcmd,644); \ - $(call do_install,run-command.h,$(prefix)/include/subcmd,644); +HDRS := exec-cmd.h help.h pager.h parse-options.h run-command.h +INSTALL_HDRS_PFX := $(DESTDIR)$(prefix)/include/subcmd +INSTALL_HDRS := $(addprefix $(INSTALL_HDRS_PFX)/, $(HDRS)) + +$(INSTALL_HDRS): $(INSTALL_HDRS_PFX)/%.h: %.h + $(call QUIET_INSTALL, $@) \ + $(call do_install,$<,$(INSTALL_HDRS_PFX)/,644) + +install_headers: $(INSTALL_HDRS) + $(call QUIET_INSTALL, libsubcmd_headers) install: install_lib install_headers
Compute the headers to be installed from their source headers and make each have its own build target to install it. Using dependencies avoids headers being reinstalled and getting a new timestamp which then causes files that depend on the header to be rebuilt. Signed-off-by: Ian Rogers <irogers@google.com> --- tools/lib/subcmd/Makefile | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-)