@@ -2992,6 +2992,7 @@ static const struct dsa_switch_ops ksz_switch_ops = {
.get_ts_info = ksz_get_ts_info,
.port_hwtstamp_get = ksz_hwtstamp_get,
.port_hwtstamp_set = ksz_hwtstamp_set,
+ .port_rxtstamp = ksz_port_rxtstamp,
};
struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
@@ -169,6 +169,69 @@ int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr)
return copy_to_user(ifr->ifr_data, &config, sizeof(config));
}
+static ktime_t ksz_tstamp_reconstruct(struct ksz_device *dev, ktime_t tstamp)
+{
+ struct timespec64 ptp_clock_time;
+ struct ksz_ptp_data *ptp_data;
+ struct timespec64 diff;
+ struct timespec64 ts;
+
+ ptp_data = &dev->ptp_data;
+ ts = ktime_to_timespec64(tstamp);
+
+ spin_lock_bh(&ptp_data->clock_lock);
+ ptp_clock_time = ptp_data->clock_time;
+ spin_unlock_bh(&ptp_data->clock_lock);
+
+ /* calculate full time from partial time stamp */
+ ts.tv_sec = (ptp_clock_time.tv_sec & ~3) | ts.tv_sec;
+
+ /* find nearest possible point in time */
+ diff = timespec64_sub(ts, ptp_clock_time);
+ if (diff.tv_sec > 2)
+ ts.tv_sec -= 4;
+ else if (diff.tv_sec < -2)
+ ts.tv_sec += 4;
+
+ return timespec64_to_ktime(ts);
+}
+
+bool ksz_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb,
+ unsigned int type)
+{
+ struct skb_shared_hwtstamps *hwtstamps = skb_hwtstamps(skb);
+ struct ksz_device *dev = ds->priv;
+ struct ptp_header *ptp_hdr;
+ u8 ptp_msg_type;
+ ktime_t tstamp;
+ s64 correction;
+
+ tstamp = KSZ_SKB_CB(skb)->tstamp;
+ memset(hwtstamps, 0, sizeof(*hwtstamps));
+ hwtstamps->hwtstamp = ksz_tstamp_reconstruct(dev, tstamp);
+
+ ptp_hdr = ptp_parse_header(skb, type);
+ if (!ptp_hdr)
+ goto out;
+
+ ptp_msg_type = ptp_get_msgtype(ptp_hdr, type);
+ if (ptp_msg_type != PTP_MSGTYPE_PDELAY_REQ)
+ goto out;
+
+ /* Only subtract the partial time stamp from the correction field. When
+ * the hardware adds the egress time stamp to the correction field of
+ * the PDelay_Resp message on tx, also only the partial time stamp will
+ * be added.
+ */
+ correction = (s64)get_unaligned_be64(&ptp_hdr->correction);
+ correction -= ktime_to_ns(tstamp) << 16;
+
+ ptp_header_update_correction(skb, type, ptp_hdr, correction);
+
+out:
+ return 0;
+}
+
static int _ksz_ptp_gettime(struct ksz_device *dev, struct timespec64 *ts)
{
u32 nanoseconds;
@@ -30,6 +30,8 @@ int ksz_get_ts_info(struct dsa_switch *ds, int port,
struct ethtool_ts_info *ts);
int ksz_hwtstamp_get(struct dsa_switch *ds, int port, struct ifreq *ifr);
int ksz_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr);
+bool ksz_port_rxtstamp(struct dsa_switch *ds, int port, struct sk_buff *skb,
+ unsigned int type);
int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p);
void ksz_ptp_irq_free(struct dsa_switch *ds, u8 p);
@@ -60,6 +62,8 @@ static inline void ksz_ptp_irq_free(struct dsa_switch *ds, u8 p) {}
#define ksz_hwtstamp_set NULL
+#define ksz_port_rxtstamp NULL
+
#endif /* End of CONFIG_NET_DSA_MICROCHIP_KSZ_PTP */
#endif
@@ -9,10 +9,31 @@
#include <net/dsa.h>
+/* All time stamps from the KSZ consist of 2 bits for seconds and 30 bits for
+ * nanoseconds. This is NOT the same as 32 bits for nanoseconds.
+ */
+#define KSZ_TSTAMP_SEC_MASK GENMASK(31, 30)
+#define KSZ_TSTAMP_NSEC_MASK GENMASK(29, 0)
+
+static inline ktime_t ksz_decode_tstamp(u32 tstamp)
+{
+ u64 ns = FIELD_GET(KSZ_TSTAMP_SEC_MASK, tstamp) * NSEC_PER_SEC +
+ FIELD_GET(KSZ_TSTAMP_NSEC_MASK, tstamp);
+
+ return ns_to_ktime(ns);
+}
+
struct ksz_tagger_data {
void (*hwtstamp_set_state)(struct dsa_switch *ds, bool on);
};
+struct ksz_skb_cb {
+ u32 tstamp;
+};
+
+#define KSZ_SKB_CB(skb) \
+ ((struct ksz_skb_cb *)((skb)->cb))
+
static inline struct ksz_tagger_data *
ksz_tagger_data(struct dsa_switch *ds)
{
@@ -151,10 +151,11 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ8795, KSZ8795_NAME);
* tag0 : Prioritization (not used now)
* tag1 : each bit represents port (eg, 0x01=port1, 0x02=port2, 0x10=port5)
*
- * For Egress (KSZ9477 -> Host), 1 byte is added before FCS.
+ * For Egress (KSZ9477 -> Host), 1/5 bytes is added before FCS.
* ---------------------------------------------------------------------------
- * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|FCS(4bytes)
+ * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|ts(4bytes)|tag0(1byte)|FCS(4bytes)
* ---------------------------------------------------------------------------
+ * ts : time stamp (Present only if bit 7 of tag0 is set)
* tag0 : zero-based value represents port
* (eg, 0x00=port1, 0x02=port3, 0x06=port7)
*/
@@ -166,6 +167,15 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ8795, KSZ8795_NAME);
#define KSZ9477_TAIL_TAG_OVERRIDE BIT(9)
#define KSZ9477_TAIL_TAG_LOOKUP BIT(10)
+static void ksz_rcv_timestamp(struct sk_buff *skb, u8 *tag)
+{
+ u8 *tstamp_raw = tag - KSZ_PTP_TAG_LEN;
+ ktime_t tstamp;
+
+ tstamp = ksz_decode_tstamp(get_unaligned_be32(tstamp_raw));
+ KSZ_SKB_CB(skb)->tstamp = tstamp;
+}
+
/* Time stamp tag *needs* to be inserted if PTP is enabled in hardware.
* Regardless of Whether it is a PTP frame or not.
*/
@@ -216,8 +226,10 @@ static struct sk_buff *ksz9477_rcv(struct sk_buff *skb, struct net_device *dev)
unsigned int len = KSZ_EGRESS_TAG_LEN;
/* Extra 4-bytes PTP timestamp */
- if (tag[0] & KSZ9477_PTP_TAG_INDICATION)
- len += KSZ9477_PTP_TAG_LEN;
+ if (tag[0] & KSZ9477_PTP_TAG_INDICATION) {
+ ksz_rcv_timestamp(skb, tag);
+ len += KSZ_PTP_TAG_LEN;
+ }
return ksz_common_rcv(skb, dev, port, len);
}
@@ -284,10 +296,11 @@ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_KSZ9893, KSZ9893_NAME);
* tag0 : represents tag override, lookup and valid
* tag1 : each bit represents port (eg, 0x01=port1, 0x02=port2, 0x80=port8)
*
- * For rcv, 1 byte is added before FCS.
+ * For rcv, 1/5 bytes is added before FCS.
* ---------------------------------------------------------------------------
- * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|tag0(1byte)|FCS(4bytes)
+ * DA(6bytes)|SA(6bytes)|....|Data(nbytes)|ts(4bytes)|tag0(1byte)|FCS(4bytes)
* ---------------------------------------------------------------------------
+ * ts : time stamp (Present only if bit 7 of tag0 is set)
* tag0 : zero-based value represents port
* (eg, 0x00=port1, 0x02=port3, 0x07=port8)
*/