@@ -238,10 +238,6 @@ OPTIONS
Also, by adding a comma, the number of mmap pages for AUX
area tracing can be specified.
---group::
- Put all events in a single event group. This precedes the --event
- option and remains only for backward compatibility. See --event.
-
-g::
Enables call-graph (stack chain/backtrace) recording for both
kernel space and user space.
@@ -51,9 +51,6 @@ Default is to monitor all CPUS.
--count-filter=<count>::
Only display functions with more events than this.
---group::
- Put the counters into a counter group.
-
--group-sort-idx::
Sort the output by the event at the index n in group. If n is invalid,
sort by the first event. It can support multiple groups with different
@@ -313,10 +310,10 @@ use '-e e1 -e e2 -G foo,foo' or just use '-e e1 -e e2 -G foo'.
perf top -e cycles,probe:icmp_rcv --switch-on=probe:icmp_rcv
- Alternatively one can ask for --group and then two overhead columns
+ Alternatively one can ask for a group and then two overhead columns
will appear, the first for cycles and the second for the switch-on event.
- perf top --group -e cycles,probe:icmp_rcv --switch-on=probe:icmp_rcv
+ perf top -e '{cycles,probe:icmp_rcv}' --switch-on=probe:icmp_rcv
This may be interesting to measure a workload only after some initialization
phase is over, i.e. insert a perf probe at that point and use the above
@@ -3380,8 +3380,6 @@ static struct option __record_options[] = {
OPT_CALLBACK(0, "mmap-flush", &record.opts, "number",
"Minimal number of bytes that is extracted from mmap data pages (default: 1)",
record__mmap_flush_parse),
- OPT_BOOLEAN(0, "group", &record.opts.group,
- "put the counters into a counter group"),
OPT_CALLBACK_NOOPT('g', NULL, &callchain_param,
NULL, "enables call-graph recording" ,
&record_callchain_opt),
@@ -181,7 +181,6 @@ static bool topdown_run = false;
static bool smi_cost = false;
static bool smi_reset = false;
static int big_num_opt = -1;
-static bool group = false;
static const char *pre_cmd = NULL;
static const char *post_cmd = NULL;
static bool sync_run = false;
@@ -781,9 +780,6 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
child_pid = evsel_list->workload.pid;
}
- if (group)
- evlist__set_leader(evsel_list);
-
if (!cpu_map__is_dummy(evsel_list->core.user_requested_cpus)) {
if (affinity__setup(&saved_affinity) < 0)
return -1;
@@ -1192,8 +1188,6 @@ static struct option stat_options[] = {
#endif
OPT_BOOLEAN('a', "all-cpus", &target.system_wide,
"system-wide collection from all CPUs"),
- OPT_BOOLEAN('g', "group", &group,
- "put the counters into a counter group"),
OPT_BOOLEAN(0, "scale", &stat_config.scale,
"Use --no-scale to disable counter scaling for multiplexing"),
OPT_INCR('v', "verbose", &verbose,
@@ -1471,8 +1471,6 @@ int cmd_top(int argc, const char **argv)
"dump the symbol table used for profiling"),
OPT_INTEGER('f', "count-filter", &top.count_filter,
"only display functions with more events than this"),
- OPT_BOOLEAN(0, "group", &opts->group,
- "put the counters into a counter group"),
OPT_BOOLEAN('i', "no-inherit", &opts->no_inherit,
"child tasks do not inherit counters"),
OPT_STRING(0, "sym-annotate", &top.sym_filter, "symbol name",
@@ -49,7 +49,6 @@ Following tests are defined (with perf commands):
perf record --call-graph dwarf kill (test-record-graph-dwarf)
perf record --call-graph fp kill (test-record-graph-fp)
perf record --call-graph fp kill (test-record-graph-fp-aarch64)
- perf record --group -e cycles,instructions kill (test-record-group)
perf record -e '{cycles,instructions}' kill (test-record-group1)
perf record -e '{cycles/period=1/,instructions/period=2/}:S' kill (test-record-group2)
perf record -D kill (test-record-no-delay)
@@ -66,6 +65,5 @@ Following tests are defined (with perf commands):
perf stat -d kill (test-stat-detailed-1)
perf stat -dd kill (test-stat-detailed-2)
perf stat -ddd kill (test-stat-detailed-3)
- perf stat --group -e cycles,instructions kill (test-stat-group)
perf stat -e '{cycles,instructions}' kill (test-stat-group1)
perf stat -i -e cycles kill (test-stat-no-inherit)
deleted file mode 100644
@@ -1,22 +0,0 @@
-[config]
-command = record
-args = --no-bpf-event --group -e cycles,instructions kill >/dev/null 2>&1
-ret = 1
-
-[event-1:base-record]
-fd=1
-group_fd=-1
-sample_type=327
-read_format=4|20
-
-[event-2:base-record]
-fd=2
-group_fd=1
-config=1
-sample_type=327
-read_format=4|20
-mmap=0
-comm=0
-task=0
-enable_on_exec=0
-disabled=0
deleted file mode 100644
@@ -1,17 +0,0 @@
-[config]
-command = stat
-args = --group -e cycles,instructions kill >/dev/null 2>&1
-ret = 1
-
-[event-1:base-stat]
-fd=1
-group_fd=-1
-read_format=3|15
-
-[event-2:base-stat]
-fd=2
-group_fd=1
-config=1
-disabled=0
-enable_on_exec=0
-read_format=3|15
@@ -230,7 +230,7 @@ int __evlist__set_tracepoints_handlers(struct evlist *evlist,
return err;
}
-void evlist__set_leader(struct evlist *evlist)
+static void evlist__set_leader(struct evlist *evlist)
{
perf_evlist__set_leader(&evlist->core);
}
@@ -221,8 +221,6 @@ void evlist__set_selected(struct evlist *evlist, struct evsel *evsel);
int evlist__create_maps(struct evlist *evlist, struct target *target);
int evlist__apply_filters(struct evlist *evlist, struct evsel **err_evsel);
-void evlist__set_leader(struct evlist *evlist);
-
u64 __evlist__combined_sample_type(struct evlist *evlist);
u64 evlist__combined_sample_type(struct evlist *evlist);
u64 evlist__combined_branch_type(struct evlist *evlist);
@@ -1142,14 +1142,6 @@ static PyObject *pyrf_evlist__open(struct pyrf_evlist *pevlist,
PyObject *args, PyObject *kwargs)
{
struct evlist *evlist = &pevlist->evlist;
- int group = 0;
- static char *kwlist[] = { "group", NULL };
-
- if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|OOii", kwlist, &group))
- return NULL;
-
- if (group)
- evlist__set_leader(evlist);
if (evlist__open(evlist) < 0) {
PyErr_SetFromErrno(PyExc_OSError);
@@ -99,13 +99,6 @@ void evlist__config(struct evlist *evlist, struct record_opts *opts, struct call
bool use_comm_exec;
bool sample_id = opts->sample_id;
- /*
- * Set the evsel leader links before we configure attributes,
- * since some might depend on this info.
- */
- if (opts->group)
- evlist__set_leader(evlist);
-
if (perf_cpu_map__cpu(evlist->core.user_requested_cpus, 0).cpu < 0)
opts->no_inherit = true;
@@ -13,7 +13,6 @@ struct option;
struct record_opts {
struct target target;
- bool group;
bool inherit_stat;
bool no_buffering;
bool no_inherit;
The group option predates grouping events using curly braces added in commit 89efb029502d ("perf tools: Add support to parse event group syntax") The --group option was retained for legacy support (in August 2012) but keeping it adds complexity. Signed-off-by: Ian Rogers <irogers@google.com> --- tools/perf/Documentation/perf-record.txt | 4 ---- tools/perf/Documentation/perf-top.txt | 7 ++----- tools/perf/builtin-record.c | 2 -- tools/perf/builtin-stat.c | 6 ------ tools/perf/builtin-top.c | 2 -- tools/perf/tests/attr/README | 2 -- tools/perf/tests/attr/test-record-group | 22 ---------------------- tools/perf/tests/attr/test-stat-group | 17 ----------------- tools/perf/util/evlist.c | 2 +- tools/perf/util/evlist.h | 2 -- tools/perf/util/python.c | 8 -------- tools/perf/util/record.c | 7 ------- tools/perf/util/record.h | 1 - 13 files changed, 3 insertions(+), 79 deletions(-) delete mode 100644 tools/perf/tests/attr/test-record-group delete mode 100644 tools/perf/tests/attr/test-stat-group