diff mbox series

[net-next,3/3] net: ethernet: renesas: rswitch: Add phy_power_{on,off}() calling

Message ID 20221226071425.3895915-4-yoshihiro.shimoda.uh@renesas.com (mailing list archive)
State Deferred
Delegated to: Netdev Maintainers
Headers show
Series net: ethernet: renesas: rswitch: Modify initialization for SERDES and PHY | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 1 maintainers not CCed: s.shtylyov@omp.ru
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 21 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Yoshihiro Shimoda Dec. 26, 2022, 7:14 a.m. UTC
Some Ethernet PHYs (like marvell10g) will decide the host interface
mode by the media-side speed. So, the rswitch driver needs to
initialize one of the Ethernet SERDES (r8a779f0-eth-serdes) ports
after linked the Ethernet PHY up. The r8a779f0-eth-serdes driver has
.init() for initializing all ports and .power_on() for initializing
each port. So, add phy_power_{on,off} calling for it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/net/ethernet/renesas/rswitch.c | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Russell King (Oracle) Jan. 3, 2023, 9:56 a.m. UTC | #1
On Mon, Dec 26, 2022 at 04:14:25PM +0900, Yoshihiro Shimoda wrote:
> Some Ethernet PHYs (like marvell10g) will decide the host interface
> mode by the media-side speed. So, the rswitch driver needs to
> initialize one of the Ethernet SERDES (r8a779f0-eth-serdes) ports
> after linked the Ethernet PHY up. The r8a779f0-eth-serdes driver has
> .init() for initializing all ports and .power_on() for initializing
> each port. So, add phy_power_{on,off} calling for it.
> 
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> ---
>  drivers/net/ethernet/renesas/rswitch.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c
> index ca79ee168206..2f335c95f5a8 100644
> --- a/drivers/net/ethernet/renesas/rswitch.c
> +++ b/drivers/net/ethernet/renesas/rswitch.c
> @@ -1180,6 +1180,10 @@ static void rswitch_mac_link_down(struct phylink_config *config,
>  				  unsigned int mode,
>  				  phy_interface_t interface)
>  {
> +	struct net_device *ndev = to_net_dev(config->dev);
> +	struct rswitch_device *rdev = netdev_priv(ndev);
> +
> +	phy_power_off(rdev->serdes);
>  }
>  
>  static void rswitch_mac_link_up(struct phylink_config *config,
> @@ -1187,7 +1191,11 @@ static void rswitch_mac_link_up(struct phylink_config *config,
>  				phy_interface_t interface, int speed,
>  				int duplex, bool tx_pause, bool rx_pause)
>  {
> +	struct net_device *ndev = to_net_dev(config->dev);
> +	struct rswitch_device *rdev = netdev_priv(ndev);
> +
>  	/* Current hardware cannot change speed at runtime */
> +	phy_power_on(rdev->serdes);
>  }
>  
>  static const struct phylink_mac_ops rswitch_phylink_ops = {

This looks to me like it will break anyone using an in-band link,
where the link status comes from the PCS behind the series that
you're now powering down and up.
Yoshihiro Shimoda Jan. 6, 2023, 7:34 a.m. UTC | #2
Hello Russell,

> From: Russell King, Sent: Tuesday, January 3, 2023 6:56 PM
> 
> On Mon, Dec 26, 2022 at 04:14:25PM +0900, Yoshihiro Shimoda wrote:
> > Some Ethernet PHYs (like marvell10g) will decide the host interface
> > mode by the media-side speed. So, the rswitch driver needs to
> > initialize one of the Ethernet SERDES (r8a779f0-eth-serdes) ports
> > after linked the Ethernet PHY up. The r8a779f0-eth-serdes driver has
> > .init() for initializing all ports and .power_on() for initializing
> > each port. So, add phy_power_{on,off} calling for it.
> >
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> > ---
> >  drivers/net/ethernet/renesas/rswitch.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c
> > index ca79ee168206..2f335c95f5a8 100644
> > --- a/drivers/net/ethernet/renesas/rswitch.c
> > +++ b/drivers/net/ethernet/renesas/rswitch.c
> > @@ -1180,6 +1180,10 @@ static void rswitch_mac_link_down(struct phylink_config *config,
> >  				  unsigned int mode,
> >  				  phy_interface_t interface)
> >  {
> > +	struct net_device *ndev = to_net_dev(config->dev);
> > +	struct rswitch_device *rdev = netdev_priv(ndev);
> > +
> > +	phy_power_off(rdev->serdes);
> >  }
> >
> >  static void rswitch_mac_link_up(struct phylink_config *config,
> > @@ -1187,7 +1191,11 @@ static void rswitch_mac_link_up(struct phylink_config *config,
> >  				phy_interface_t interface, int speed,
> >  				int duplex, bool tx_pause, bool rx_pause)
> >  {
> > +	struct net_device *ndev = to_net_dev(config->dev);
> > +	struct rswitch_device *rdev = netdev_priv(ndev);
> > +
> >  	/* Current hardware cannot change speed at runtime */
> > +	phy_power_on(rdev->serdes);
> >  }
> >
> >  static const struct phylink_mac_ops rswitch_phylink_ops = {
> 
> This looks to me like it will break anyone using an in-band link,
> where the link status comes from the PCS behind the series that
> you're now powering down and up.

Thank you for your review!
To be honest, I didn't know about "an in-band link". So, I studied a little,
and then I might understand about your comments. However, I still don't
understand whether this hardware (rswitch) can support the "in-band link" or not.
This seems to need a special hardware feature for "in-band link" and
only software cannot support it, IIUC.
# Unfortunately, this hardware's datasheet cannot be in public for now though...

Anyway, I'll add a condition which this driver cannot support MLO_AN_INBAND
to avoid a problem by someone for now.

Best regards,
Yoshihiro Shimoda
diff mbox series

Patch

diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c
index ca79ee168206..2f335c95f5a8 100644
--- a/drivers/net/ethernet/renesas/rswitch.c
+++ b/drivers/net/ethernet/renesas/rswitch.c
@@ -1180,6 +1180,10 @@  static void rswitch_mac_link_down(struct phylink_config *config,
 				  unsigned int mode,
 				  phy_interface_t interface)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct rswitch_device *rdev = netdev_priv(ndev);
+
+	phy_power_off(rdev->serdes);
 }
 
 static void rswitch_mac_link_up(struct phylink_config *config,
@@ -1187,7 +1191,11 @@  static void rswitch_mac_link_up(struct phylink_config *config,
 				phy_interface_t interface, int speed,
 				int duplex, bool tx_pause, bool rx_pause)
 {
+	struct net_device *ndev = to_net_dev(config->dev);
+	struct rswitch_device *rdev = netdev_priv(ndev);
+
 	/* Current hardware cannot change speed at runtime */
+	phy_power_on(rdev->serdes);
 }
 
 static const struct phylink_mac_ops rswitch_phylink_ops = {