diff mbox series

[RFC,net-next,v2,09/12] net: ethernet: freescale: fec: Separate C22 and C45 transactions for xgmac

Message ID 20221227-v6-2-rc1-c45-seperation-v2-9-ddb37710e5a7@walle.cc (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series net: mdio: Start separating C22 and C45 | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit fail Errors and warnings before: 10 this patch: 10
netdev/cc_maintainers success CCed 12 of 12 maintainers
netdev/build_clang fail Errors and warnings before: 10 this patch: 10
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn fail Errors and warnings before: 10 this patch: 10
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 203 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Michael Walle Dec. 27, 2022, 11:07 p.m. UTC
From: Andrew Lunn <andrew@lunn.ch>

The fec MDIO bus driver can perform both C22 and C45 transfers.
Create separate functions for each and register the C45 versions using
the new API calls where appropriate.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
---
v2:
 - [al] Fixup some indentation
---
 drivers/net/ethernet/freescale/fec_main.c | 153 ++++++++++++++++++++----------
 1 file changed, 103 insertions(+), 50 deletions(-)

Comments

Wei Fang Dec. 28, 2022, 3:31 a.m. UTC | #1
> -----Original Message-----
> From: Michael Walle <michael@walle.cc>
> Sent: 2022年12月28日 7:07
> To: Heiner Kallweit <hkallweit1@gmail.com>; Russell King
> <linux@armlinux.org.uk>; David S. Miller <davem@davemloft.net>; Eric
> Dumazet <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo
> Abeni <pabeni@redhat.com>; Jose Abreu <Jose.Abreu@synopsys.com>;
> Sergey Shtylyov <s.shtylyov@omp.ru>; Wei Fang <wei.fang@nxp.com>;
> Shenwei Wang <shenwei.wang@nxp.com>; Clark Wang
> <xiaoning.wang@nxp.com>; dl-linux-imx <linux-imx@nxp.com>; Sean Wang
> <sean.wang@mediatek.com>; Landen Chao <Landen.Chao@mediatek.com>;
> DENG Qingfang <dqfext@gmail.com>; Florian Fainelli <f.fainelli@gmail.com>;
> Vladimir Oltean <olteanv@gmail.com>; Matthias Brugger
> <matthias.bgg@gmail.com>
> Cc: netdev@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-renesas-soc@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-mediatek@lists.infradead.org; Andrew Lunn <andrew@lunn.ch>; Geert
> Uytterhoeven <geert+renesas@glider.be>; Michael Walle <michael@walle.cc>
> Subject: [PATCH RFC net-next v2 09/12] net: ethernet: freescale: fec: Separate
> C22 and C45 transactions for xgmac
> 
> From: Andrew Lunn <andrew@lunn.ch>
> 
> The fec MDIO bus driver can perform both C22 and C45 transfers.
> Create separate functions for each and register the C45 versions using
> the new API calls where appropriate.
> 
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> v2:
>  - [al] Fixup some indentation
> ---
>  drivers/net/ethernet/freescale/fec_main.c | 153
> ++++++++++++++++++++----------
>  1 file changed, 103 insertions(+), 50 deletions(-)
> 
> diff --git a/drivers/net/ethernet/freescale/fec_main.c
> b/drivers/net/ethernet/freescale/fec_main.c
> index 644f3c963730..e6238e53940d 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -1987,47 +1987,74 @@ static int fec_enet_mdio_wait(struct
> fec_enet_private *fep)
>  	return ret;
>  }
> 
> -static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
> +static int fec_enet_mdio_read_c22(struct mii_bus *bus, int mii_id, int
> regnum)
>  {
>  	struct fec_enet_private *fep = bus->priv;
>  	struct device *dev = &fep->pdev->dev;
>  	int ret = 0, frame_start, frame_addr, frame_op;
> -	bool is_c45 = !!(regnum & MII_ADDR_C45);
> 
>  	ret = pm_runtime_resume_and_get(dev);
>  	if (ret < 0)
>  		return ret;
> 
> -	if (is_c45) {
> -		frame_start = FEC_MMFR_ST_C45;
> +	/* C22 read */
> +	frame_op = FEC_MMFR_OP_READ;
> +	frame_start = FEC_MMFR_ST;
> +	frame_addr = regnum;
> 
> -		/* write address */
> -		frame_addr = (regnum >> 16);
> -		writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
> -		       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> -		       FEC_MMFR_TA | (regnum & 0xFFFF),
> -		       fep->hwp + FEC_MII_DATA);
> +	/* start a read op */
> +	writel(frame_start | frame_op |
> +	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> +	       FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
> 
> -		/* wait for end of transfer */
> -		ret = fec_enet_mdio_wait(fep);
> -		if (ret) {
> -			netdev_err(fep->netdev, "MDIO address write timeout\n");
> -			goto out;
> -		}
> +	/* wait for end of transfer */
> +	ret = fec_enet_mdio_wait(fep);
> +	if (ret) {
> +		netdev_err(fep->netdev, "MDIO read timeout\n");
> +		goto out;
> +	}
> 
> -		frame_op = FEC_MMFR_OP_READ_C45;
> +	ret = FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA));
> 
> -	} else {
> -		/* C22 read */
> -		frame_op = FEC_MMFR_OP_READ;
> -		frame_start = FEC_MMFR_ST;
> -		frame_addr = regnum;
> +out:
> +	pm_runtime_mark_last_busy(dev);
> +	pm_runtime_put_autosuspend(dev);
> +
> +	return ret;
> +}
> +
> +static int fec_enet_mdio_read_c45(struct mii_bus *bus, int mii_id,
> +				  int devad, int regnum)
> +{
> +	struct fec_enet_private *fep = bus->priv;
> +	struct device *dev = &fep->pdev->dev;
> +	int ret = 0, frame_start, frame_op;
> +
> +	ret = pm_runtime_resume_and_get(dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	frame_start = FEC_MMFR_ST_C45;
> +
> +	/* write address */
> +	writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
> +	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(devad) |
> +	       FEC_MMFR_TA | (regnum & 0xFFFF),
> +	       fep->hwp + FEC_MII_DATA);
> +
> +	/* wait for end of transfer */
> +	ret = fec_enet_mdio_wait(fep);
> +	if (ret) {
> +		netdev_err(fep->netdev, "MDIO address write timeout\n");
> +		goto out;
>  	}
> 
> +	frame_op = FEC_MMFR_OP_READ_C45;
> +
>  	/* start a read op */
>  	writel(frame_start | frame_op |
> -		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> -		FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
> +	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(devad) |
> +	       FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
> 
>  	/* wait for end of transfer */
>  	ret = fec_enet_mdio_wait(fep);
> @@ -2045,45 +2072,69 @@ static int fec_enet_mdio_read(struct mii_bus
> *bus, int mii_id, int regnum)
>  	return ret;
>  }
> 
> -static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
> -			   u16 value)
> +static int fec_enet_mdio_write_c22(struct mii_bus *bus, int mii_id, int
> regnum,
> +				   u16 value)
>  {
>  	struct fec_enet_private *fep = bus->priv;
>  	struct device *dev = &fep->pdev->dev;
>  	int ret, frame_start, frame_addr;
> -	bool is_c45 = !!(regnum & MII_ADDR_C45);
> 
>  	ret = pm_runtime_resume_and_get(dev);
>  	if (ret < 0)
>  		return ret;
> 
> -	if (is_c45) {
> -		frame_start = FEC_MMFR_ST_C45;
> +	/* C22 write */
> +	frame_start = FEC_MMFR_ST;
> +	frame_addr = regnum;
> 
> -		/* write address */
> -		frame_addr = (regnum >> 16);
> -		writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
> -		       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> -		       FEC_MMFR_TA | (regnum & 0xFFFF),
> -		       fep->hwp + FEC_MII_DATA);
> +	/* start a write op */
> +	writel(frame_start | FEC_MMFR_OP_WRITE |
> +	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> +	       FEC_MMFR_TA | FEC_MMFR_DATA(value),
> +	       fep->hwp + FEC_MII_DATA);
> 
> -		/* wait for end of transfer */
> -		ret = fec_enet_mdio_wait(fep);
> -		if (ret) {
> -			netdev_err(fep->netdev, "MDIO address write timeout\n");
> -			goto out;
> -		}
> -	} else {
> -		/* C22 write */
> -		frame_start = FEC_MMFR_ST;
> -		frame_addr = regnum;
> +	/* wait for end of transfer */
> +	ret = fec_enet_mdio_wait(fep);
> +	if (ret)
> +		netdev_err(fep->netdev, "MDIO write timeout\n");
> +
> +	pm_runtime_mark_last_busy(dev);
> +	pm_runtime_put_autosuspend(dev);
> +
> +	return ret;
> +}
> +
> +static int fec_enet_mdio_write_c45(struct mii_bus *bus, int mii_id,
> +				   int devad, int regnum, u16 value)
> +{
> +	struct fec_enet_private *fep = bus->priv;
> +	struct device *dev = &fep->pdev->dev;
> +	int ret, frame_start;
> +
> +	ret = pm_runtime_resume_and_get(dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	frame_start = FEC_MMFR_ST_C45;
> +
> +	/* write address */
> +	writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
> +	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(devad) |
> +	       FEC_MMFR_TA | (regnum & 0xFFFF),
> +	       fep->hwp + FEC_MII_DATA);
> +
> +	/* wait for end of transfer */
> +	ret = fec_enet_mdio_wait(fep);
> +	if (ret) {
> +		netdev_err(fep->netdev, "MDIO address write timeout\n");
> +		goto out;
>  	}
> 
>  	/* start a write op */
>  	writel(frame_start | FEC_MMFR_OP_WRITE |
> -		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
> -		FEC_MMFR_TA | FEC_MMFR_DATA(value),
> -		fep->hwp + FEC_MII_DATA);
> +	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(devad) |
> +	       FEC_MMFR_TA | FEC_MMFR_DATA(value),
> +	       fep->hwp + FEC_MII_DATA);
> 
>  	/* wait for end of transfer */
>  	ret = fec_enet_mdio_wait(fep);
> @@ -2381,8 +2432,10 @@ static int fec_enet_mii_init(struct platform_device
> *pdev)
>  	}
> 
>  	fep->mii_bus->name = "fec_enet_mii_bus";
> -	fep->mii_bus->read = fec_enet_mdio_read;
> -	fep->mii_bus->write = fec_enet_mdio_write;
> +	fep->mii_bus->read = fec_enet_mdio_read_c22;
> +	fep->mii_bus->write = fec_enet_mdio_write_c22;
> +	fep->mii_bus->read_c45 = fec_enet_mdio_read_c45;
> +	fep->mii_bus->write_c45 = fec_enet_mdio_write_c45;
>  	snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
>  		pdev->name, fep->dev_id + 1);
>  	fep->mii_bus->priv = fep;
> 

It looks good to me.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Vladimir Oltean Jan. 3, 2023, 1:57 p.m. UTC | #2
Regarding the commit title, there's no xgmac block in the FEC. "XG"
means 10 Gbps, surely there's no such thing on imx/Vybrid. Can just say:
"net: fec: Separate C22 and C45 MDIO transactions".
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 644f3c963730..e6238e53940d 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1987,47 +1987,74 @@  static int fec_enet_mdio_wait(struct fec_enet_private *fep)
 	return ret;
 }
 
-static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+static int fec_enet_mdio_read_c22(struct mii_bus *bus, int mii_id, int regnum)
 {
 	struct fec_enet_private *fep = bus->priv;
 	struct device *dev = &fep->pdev->dev;
 	int ret = 0, frame_start, frame_addr, frame_op;
-	bool is_c45 = !!(regnum & MII_ADDR_C45);
 
 	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
 		return ret;
 
-	if (is_c45) {
-		frame_start = FEC_MMFR_ST_C45;
+	/* C22 read */
+	frame_op = FEC_MMFR_OP_READ;
+	frame_start = FEC_MMFR_ST;
+	frame_addr = regnum;
 
-		/* write address */
-		frame_addr = (regnum >> 16);
-		writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
-		       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
-		       FEC_MMFR_TA | (regnum & 0xFFFF),
-		       fep->hwp + FEC_MII_DATA);
+	/* start a read op */
+	writel(frame_start | frame_op |
+	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
+	       FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
 
-		/* wait for end of transfer */
-		ret = fec_enet_mdio_wait(fep);
-		if (ret) {
-			netdev_err(fep->netdev, "MDIO address write timeout\n");
-			goto out;
-		}
+	/* wait for end of transfer */
+	ret = fec_enet_mdio_wait(fep);
+	if (ret) {
+		netdev_err(fep->netdev, "MDIO read timeout\n");
+		goto out;
+	}
 
-		frame_op = FEC_MMFR_OP_READ_C45;
+	ret = FEC_MMFR_DATA(readl(fep->hwp + FEC_MII_DATA));
 
-	} else {
-		/* C22 read */
-		frame_op = FEC_MMFR_OP_READ;
-		frame_start = FEC_MMFR_ST;
-		frame_addr = regnum;
+out:
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+static int fec_enet_mdio_read_c45(struct mii_bus *bus, int mii_id,
+				  int devad, int regnum)
+{
+	struct fec_enet_private *fep = bus->priv;
+	struct device *dev = &fep->pdev->dev;
+	int ret = 0, frame_start, frame_op;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	frame_start = FEC_MMFR_ST_C45;
+
+	/* write address */
+	writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
+	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(devad) |
+	       FEC_MMFR_TA | (regnum & 0xFFFF),
+	       fep->hwp + FEC_MII_DATA);
+
+	/* wait for end of transfer */
+	ret = fec_enet_mdio_wait(fep);
+	if (ret) {
+		netdev_err(fep->netdev, "MDIO address write timeout\n");
+		goto out;
 	}
 
+	frame_op = FEC_MMFR_OP_READ_C45;
+
 	/* start a read op */
 	writel(frame_start | frame_op |
-		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
-		FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
+	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(devad) |
+	       FEC_MMFR_TA, fep->hwp + FEC_MII_DATA);
 
 	/* wait for end of transfer */
 	ret = fec_enet_mdio_wait(fep);
@@ -2045,45 +2072,69 @@  static int fec_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 	return ret;
 }
 
-static int fec_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
-			   u16 value)
+static int fec_enet_mdio_write_c22(struct mii_bus *bus, int mii_id, int regnum,
+				   u16 value)
 {
 	struct fec_enet_private *fep = bus->priv;
 	struct device *dev = &fep->pdev->dev;
 	int ret, frame_start, frame_addr;
-	bool is_c45 = !!(regnum & MII_ADDR_C45);
 
 	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
 		return ret;
 
-	if (is_c45) {
-		frame_start = FEC_MMFR_ST_C45;
+	/* C22 write */
+	frame_start = FEC_MMFR_ST;
+	frame_addr = regnum;
 
-		/* write address */
-		frame_addr = (regnum >> 16);
-		writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
-		       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
-		       FEC_MMFR_TA | (regnum & 0xFFFF),
-		       fep->hwp + FEC_MII_DATA);
+	/* start a write op */
+	writel(frame_start | FEC_MMFR_OP_WRITE |
+	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
+	       FEC_MMFR_TA | FEC_MMFR_DATA(value),
+	       fep->hwp + FEC_MII_DATA);
 
-		/* wait for end of transfer */
-		ret = fec_enet_mdio_wait(fep);
-		if (ret) {
-			netdev_err(fep->netdev, "MDIO address write timeout\n");
-			goto out;
-		}
-	} else {
-		/* C22 write */
-		frame_start = FEC_MMFR_ST;
-		frame_addr = regnum;
+	/* wait for end of transfer */
+	ret = fec_enet_mdio_wait(fep);
+	if (ret)
+		netdev_err(fep->netdev, "MDIO write timeout\n");
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+static int fec_enet_mdio_write_c45(struct mii_bus *bus, int mii_id,
+				   int devad, int regnum, u16 value)
+{
+	struct fec_enet_private *fep = bus->priv;
+	struct device *dev = &fep->pdev->dev;
+	int ret, frame_start;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	frame_start = FEC_MMFR_ST_C45;
+
+	/* write address */
+	writel(frame_start | FEC_MMFR_OP_ADDR_WRITE |
+	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(devad) |
+	       FEC_MMFR_TA | (regnum & 0xFFFF),
+	       fep->hwp + FEC_MII_DATA);
+
+	/* wait for end of transfer */
+	ret = fec_enet_mdio_wait(fep);
+	if (ret) {
+		netdev_err(fep->netdev, "MDIO address write timeout\n");
+		goto out;
 	}
 
 	/* start a write op */
 	writel(frame_start | FEC_MMFR_OP_WRITE |
-		FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(frame_addr) |
-		FEC_MMFR_TA | FEC_MMFR_DATA(value),
-		fep->hwp + FEC_MII_DATA);
+	       FEC_MMFR_PA(mii_id) | FEC_MMFR_RA(devad) |
+	       FEC_MMFR_TA | FEC_MMFR_DATA(value),
+	       fep->hwp + FEC_MII_DATA);
 
 	/* wait for end of transfer */
 	ret = fec_enet_mdio_wait(fep);
@@ -2381,8 +2432,10 @@  static int fec_enet_mii_init(struct platform_device *pdev)
 	}
 
 	fep->mii_bus->name = "fec_enet_mii_bus";
-	fep->mii_bus->read = fec_enet_mdio_read;
-	fep->mii_bus->write = fec_enet_mdio_write;
+	fep->mii_bus->read = fec_enet_mdio_read_c22;
+	fep->mii_bus->write = fec_enet_mdio_write_c22;
+	fep->mii_bus->read_c45 = fec_enet_mdio_read_c45;
+	fep->mii_bus->write_c45 = fec_enet_mdio_write_c45;
 	snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
 		pdev->name, fep->dev_id + 1);
 	fep->mii_bus->priv = fep;