@@ -812,10 +812,21 @@ int rvu_mbox_handler_cpt_sts(struct rvu *rvu, struct cpt_sts_req *req,
#define RXC_ZOMBIE_COUNT GENMASK_ULL(60, 48)
static void cpt_rxc_time_cfg(struct rvu *rvu, struct cpt_rxc_time_cfg_req *req,
- int blkaddr)
+ int blkaddr, struct cpt_rxc_time_cfg_req *save)
{
u64 dfrg_reg;
+ if (save) {
+ /* Save older config */
+ dfrg_reg = rvu_read64(rvu, blkaddr, CPT_AF_RXC_DFRG);
+ save->zombie_thres = FIELD_GET(RXC_ZOMBIE_THRES, dfrg_reg);
+ save->zombie_limit = FIELD_GET(RXC_ZOMBIE_LIMIT, dfrg_reg);
+ save->active_thres = FIELD_GET(RXC_ACTIVE_THRES, dfrg_reg);
+ save->active_limit = FIELD_GET(RXC_ACTIVE_LIMIT, dfrg_reg);
+
+ save->step = rvu_read64(rvu, blkaddr, CPT_AF_RXC_TIME_CFG);
+ }
+
dfrg_reg = FIELD_PREP(RXC_ZOMBIE_THRES, req->zombie_thres);
dfrg_reg |= FIELD_PREP(RXC_ZOMBIE_LIMIT, req->zombie_limit);
dfrg_reg |= FIELD_PREP(RXC_ACTIVE_THRES, req->active_thres);
@@ -840,7 +851,7 @@ int rvu_mbox_handler_cpt_rxc_time_cfg(struct rvu *rvu,
!is_cpt_vf(rvu, req->hdr.pcifunc))
return CPT_AF_ERR_ACCESS_DENIED;
- cpt_rxc_time_cfg(rvu, req, blkaddr);
+ cpt_rxc_time_cfg(rvu, req, blkaddr, NULL);
return 0;
}
@@ -886,7 +897,7 @@ int rvu_mbox_handler_cpt_lf_reset(struct rvu *rvu, struct cpt_lf_rst_req *req,
static void cpt_rxc_teardown(struct rvu *rvu, int blkaddr)
{
- struct cpt_rxc_time_cfg_req req;
+ struct cpt_rxc_time_cfg_req req, prev;
int timeout = 2000;
u64 reg;
@@ -902,7 +913,7 @@ static void cpt_rxc_teardown(struct rvu *rvu, int blkaddr)
req.active_thres = 1;
req.active_limit = 1;
- cpt_rxc_time_cfg(rvu, &req, blkaddr);
+ cpt_rxc_time_cfg(rvu, &req, blkaddr, &prev);
do {
reg = rvu_read64(rvu, blkaddr, CPT_AF_RXC_ACTIVE_STS);
@@ -928,6 +939,9 @@ static void cpt_rxc_teardown(struct rvu *rvu, int blkaddr)
if (timeout == 0)
dev_warn(rvu->dev, "Poll for RXC zombie count hits hard loop counter\n");
+
+ /* Restore config */
+ cpt_rxc_time_cfg(rvu, &prev, blkaddr, NULL);
}
#define INFLIGHT GENMASK_ULL(8, 0)
From: Nithin Dabilpuram <ndabilpuram@marvell.com> Restore rxc timeout and threshold config after teardown sequence is complete as it is global config and not per CPT LF. Change-Id: I6b7a7149d5f8ce9db44c1b339a655523cdf3cfd0 --- .../ethernet/marvell/octeontx2/af/rvu_cpt.c | 22 +++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)