diff mbox series

[net-next,v3,2/4] mlxbf_gige: support 10M/100M/1G speeds on BlueField-3

Message ID 20230112202609.21331-3-davthompson@nvidia.com (mailing list archive)
State Accepted
Commit 20d03d4d9437771a9b6d38d4a6027a70d78d9865
Delegated to: Netdev Maintainers
Headers show
Series mlxbf_gige: add BlueField-3 support | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next, async
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 1 maintainers not CCed: andrew@lunn.ch
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch warning WARNING: line length of 81 exceeds 80 columns WARNING: line length of 82 exceeds 80 columns WARNING: line length of 84 exceeds 80 columns WARNING: line length of 94 exceeds 80 columns
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

David Thompson Jan. 12, 2023, 8:26 p.m. UTC 
The BlueField-3 OOB interface supports 10Mbps, 100Mbps, and 1Gbps speeds.
The external PHY is responsible for autonegotiating the speed with the
link partner. Once the autonegotiation is done, the BlueField PLU needs
to be configured accordingly.

This patch does two things:
1) Initialize the advertised control flow/duplex/speed in the probe
   based on the BlueField SoC generation (2 or 3)
2) Adjust the PLU speed config in the PHY interrupt handler

Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
---
 .../ethernet/mellanox/mlxbf_gige/mlxbf_gige.h |   8 ++
 .../mellanox/mlxbf_gige/mlxbf_gige_main.c     | 105 +++++++++++++++---
 .../mellanox/mlxbf_gige/mlxbf_gige_regs.h     |  21 ++++
 3 files changed, 119 insertions(+), 15 deletions(-)

Comments

Andrew Lunn Jan. 12, 2023, 10:10 p.m. UTC | #1 
On Thu, Jan 12, 2023 at 03:26:07PM -0500, David Thompson wrote:
> The BlueField-3 OOB interface supports 10Mbps, 100Mbps, and 1Gbps speeds.
> The external PHY is responsible for autonegotiating the speed with the
> link partner. Once the autonegotiation is done, the BlueField PLU needs
> to be configured accordingly.
> 
> This patch does two things:
> 1) Initialize the advertised control flow/duplex/speed in the probe
>    based on the BlueField SoC generation (2 or 3)
> 2) Adjust the PLU speed config in the PHY interrupt handler
> 
> Signed-off-by: David Thompson <davthompson@nvidia.com>
> Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
index 421a0b1b766c..a453b9cd9033 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige.h
@@ -14,6 +14,7 @@ 
 #include <linux/irqreturn.h>
 #include <linux/netdevice.h>
 #include <linux/irq.h>
+#include <linux/phy.h>
 
 /* The silicon design supports a maximum RX ring size of
  * 32K entries. Based on current testing this maximum size
@@ -84,6 +85,12 @@  struct mlxbf_gige_mdio_gw {
 	struct mlxbf_gige_reg_param st1;
 };
 
+struct mlxbf_gige_link_cfg {
+	void (*set_phy_link_mode)(struct phy_device *phydev);
+	void (*adjust_link)(struct net_device *netdev);
+	phy_interface_t phy_mode;
+};
+
 struct mlxbf_gige {
 	void __iomem *base;
 	void __iomem *llu_base;
@@ -121,6 +128,7 @@  struct mlxbf_gige {
 	struct mlxbf_gige_stats stats;
 	u8 hw_version;
 	struct mlxbf_gige_mdio_gw *mdio_gw;
+	int prev_speed;
 };
 
 /* Rx Work Queue Element definitions */
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
index e08c07e914c1..32d7030eb2cf 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_main.c
@@ -263,13 +263,99 @@  static const struct net_device_ops mlxbf_gige_netdev_ops = {
 	.ndo_get_stats64        = mlxbf_gige_get_stats64,
 };
 
-static void mlxbf_gige_adjust_link(struct net_device *netdev)
+static void mlxbf_gige_bf2_adjust_link(struct net_device *netdev)
 {
 	struct phy_device *phydev = netdev->phydev;
 
 	phy_print_status(phydev);
 }
 
+static void mlxbf_gige_bf3_adjust_link(struct net_device *netdev)
+{
+	struct mlxbf_gige *priv = netdev_priv(netdev);
+	struct phy_device *phydev = netdev->phydev;
+	u8 sgmii_mode;
+	u16 ipg_size;
+	u32 val;
+
+	if (phydev->link && phydev->speed != priv->prev_speed) {
+		switch (phydev->speed) {
+		case 1000:
+			ipg_size = MLXBF_GIGE_1G_IPG_SIZE;
+			sgmii_mode = MLXBF_GIGE_1G_SGMII_MODE;
+			break;
+		case 100:
+			ipg_size = MLXBF_GIGE_100M_IPG_SIZE;
+			sgmii_mode = MLXBF_GIGE_100M_SGMII_MODE;
+			break;
+		case 10:
+			ipg_size = MLXBF_GIGE_10M_IPG_SIZE;
+			sgmii_mode = MLXBF_GIGE_10M_SGMII_MODE;
+			break;
+		default:
+			return;
+		}
+
+		val = readl(priv->plu_base + MLXBF_GIGE_PLU_TX_REG0);
+		val &= ~(MLXBF_GIGE_PLU_TX_IPG_SIZE_MASK | MLXBF_GIGE_PLU_TX_SGMII_MODE_MASK);
+		val |= FIELD_PREP(MLXBF_GIGE_PLU_TX_IPG_SIZE_MASK, ipg_size);
+		val |= FIELD_PREP(MLXBF_GIGE_PLU_TX_SGMII_MODE_MASK, sgmii_mode);
+		writel(val, priv->plu_base + MLXBF_GIGE_PLU_TX_REG0);
+
+		val = readl(priv->plu_base + MLXBF_GIGE_PLU_RX_REG0);
+		val &= ~MLXBF_GIGE_PLU_RX_SGMII_MODE_MASK;
+		val |= FIELD_PREP(MLXBF_GIGE_PLU_RX_SGMII_MODE_MASK, sgmii_mode);
+		writel(val, priv->plu_base + MLXBF_GIGE_PLU_RX_REG0);
+
+		priv->prev_speed = phydev->speed;
+	}
+
+	phy_print_status(phydev);
+}
+
+static void mlxbf_gige_bf2_set_phy_link_mode(struct phy_device *phydev)
+{
+	/* MAC only supports 1000T full duplex mode */
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Full_BIT);
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT);
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
+
+	/* Only symmetric pause with flow control enabled is supported so no
+	 * need to negotiate pause.
+	 */
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising);
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising);
+}
+
+static void mlxbf_gige_bf3_set_phy_link_mode(struct phy_device *phydev)
+{
+	/* MAC only supports full duplex mode */
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
+
+	/* Only symmetric pause with flow control enabled is supported so no
+	 * need to negotiate pause.
+	 */
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising);
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising);
+}
+
+static struct mlxbf_gige_link_cfg mlxbf_gige_link_cfgs[] = {
+	[MLXBF_GIGE_VERSION_BF2] = {
+		.set_phy_link_mode = mlxbf_gige_bf2_set_phy_link_mode,
+		.adjust_link = mlxbf_gige_bf2_adjust_link,
+		.phy_mode = PHY_INTERFACE_MODE_GMII
+	},
+	[MLXBF_GIGE_VERSION_BF3] = {
+		.set_phy_link_mode = mlxbf_gige_bf3_set_phy_link_mode,
+		.adjust_link = mlxbf_gige_bf3_adjust_link,
+		.phy_mode = PHY_INTERFACE_MODE_SGMII
+	}
+};
+
 static int mlxbf_gige_probe(struct platform_device *pdev)
 {
 	struct phy_device *phydev;
@@ -359,25 +445,14 @@  static int mlxbf_gige_probe(struct platform_device *pdev)
 	phydev->irq = phy_irq;
 
 	err = phy_connect_direct(netdev, phydev,
-				 mlxbf_gige_adjust_link,
-				 PHY_INTERFACE_MODE_GMII);
+				 mlxbf_gige_link_cfgs[priv->hw_version].adjust_link,
+				 mlxbf_gige_link_cfgs[priv->hw_version].phy_mode);
 	if (err) {
 		dev_err(&pdev->dev, "Could not attach to PHY\n");
 		goto out;
 	}
 
-	/* MAC only supports 1000T full duplex mode */
-	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
-	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Full_BIT);
-	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
-	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT);
-	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
-
-	/* Only symmetric pause with flow control enabled is supported so no
-	 * need to negotiate pause.
-	 */
-	linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydev->advertising);
-	linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydev->advertising);
+	mlxbf_gige_link_cfgs[priv->hw_version].set_phy_link_mode(phydev);
 
 	/* Display information about attached PHY device */
 	phy_attached_info(phydev);
diff --git a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h
index 8d52dbef4adf..cd0973229c9b 100644
--- a/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h
+++ b/drivers/net/ethernet/mellanox/mlxbf_gige/mlxbf_gige_regs.h
@@ -8,6 +8,8 @@ 
 #ifndef __MLXBF_GIGE_REGS_H__
 #define __MLXBF_GIGE_REGS_H__
 
+#include <linux/bitfield.h>
+
 #define MLXBF_GIGE_VERSION                            0x0000
 #define MLXBF_GIGE_VERSION_BF2                        0x0
 #define MLXBF_GIGE_VERSION_BF3                        0x1
@@ -78,4 +80,23 @@ 
  */
 #define MLXBF_GIGE_MMIO_REG_SZ                        (MLXBF_GIGE_MAC_CFG + 8)
 
+#define MLXBF_GIGE_PLU_TX_REG0                        0x80
+#define MLXBF_GIGE_PLU_TX_IPG_SIZE_MASK               GENMASK(11, 0)
+#define MLXBF_GIGE_PLU_TX_SGMII_MODE_MASK             GENMASK(15, 14)
+
+#define MLXBF_GIGE_PLU_RX_REG0                        0x10
+#define MLXBF_GIGE_PLU_RX_SGMII_MODE_MASK             GENMASK(25, 24)
+
+#define MLXBF_GIGE_1G_SGMII_MODE                      0x0
+#define MLXBF_GIGE_10M_SGMII_MODE                     0x1
+#define MLXBF_GIGE_100M_SGMII_MODE                    0x2
+
+/* ipg_size default value for 1G is fixed by HW to 11 + End = 12.
+ * So for 100M it is 12 * 10 - 1 = 119
+ * For 10M, it is 12 * 100 - 1 = 1199
+ */
+#define MLXBF_GIGE_1G_IPG_SIZE                        11
+#define MLXBF_GIGE_100M_IPG_SIZE                      119
+#define MLXBF_GIGE_10M_IPG_SIZE                       1199
+
 #endif /* !defined(__MLXBF_GIGE_REGS_H__) */