@@ -18,6 +18,7 @@ Linux Scheduler
sched-nice-design
sched-rt-group
sched-stats
+ sched-ext
sched-debug
text_files
new file mode 100644
@@ -0,0 +1,224 @@
+==========================
+Extensible Scheduler Class
+==========================
+
+sched_ext is a scheduler class whose behavior can be defined by a set of BPF
+programs - the BPF scheduler.
+
+* sched_ext exports a full scheduling interface so that any scheduling
+ algorithm can be implemented on top.
+
+* The BPF scheduler can group CPUs however it sees fit and schedule them
+ together, as tasks aren't tied to specific CPUs at the time of wakeup.
+
+* The BPF scheduler can be turned on and off dynamically anytime.
+
+* The system integrity is maintained no matter what the BPF scheduler does.
+ The default scheduling behavior is restored anytime an error is detected,
+ a runnable task stalls, or on invoking the SysRq key sequence
+ :kbd:`SysRq-S`.
+
+Switching to and from sched_ext
+===============================
+
+``CONFIG_SCHED_CLASS_EXT`` is the config option to enable sched_ext and
+``tools/sched_ext`` contains the example schedulers.
+
+sched_ext is used only when the BPF scheduler is loaded and running.
+
+If a task explicitly sets its scheduling policy to ``SCHED_EXT``, it will be
+treated as ``SCHED_NORMAL`` and scheduled by CFS until the BPF scheduler is
+loaded. On load, such tasks will be switched to and scheduled by sched_ext.
+
+The BPF scheduler can choose to schedule all normal and lower class tasks by
+calling ``scx_bpf_switch_all()`` from its ``init()`` operation. In this
+case, all ``SCHED_NORMAL``, ``SCHED_BATCH``, ``SCHED_IDLE`` and
+``SCHED_EXT`` tasks are scheduled by sched_ext. In the example schedulers,
+this mode can be selected with the ``-a`` option.
+
+Terminating the sched_ext scheduler program, triggering :kbd:`SysRq-S`, or
+detection of any internal error including stalled runnable tasks aborts the
+BPF scheduler and reverts all tasks back to CFS.
+
+.. code-block:: none
+
+ # make -j16 -C tools/sched_ext
+ # tools/sched_ext/scx_example_dummy -a
+ local=0 global=3
+ local=5 global=24
+ local=9 global=44
+ local=13 global=56
+ local=17 global=72
+ ^CEXIT: BPF scheduler unregistered
+
+If ``CONFIG_SCHED_DEBUG`` is set, the current status of the BPF scheduler
+and whether a given task is on sched_ext can be determined as follows:
+
+.. code-block:: none
+
+ # cat /sys/kernel/debug/sched/ext
+ ops : dummy
+ enabled : 1
+ switching_all : 1
+ switched_all : 1
+ enable_state : enabled
+
+ # grep ext /proc/self/sched
+ ext.enabled : 1
+
+The Basics
+==========
+
+Userspace can implement an arbitrary BPF scheduler by loading a set of BPF
+programs that implement ``struct sched_ext_ops``. The only mandatory field
+is ``ops.name`` which must be a valid BPF object name. All operations are
+optional. The following modified excerpt is from
+``tools/sched/scx_example_dummy.bpf.c`` showing a minimal global FIFO
+scheduler.
+
+.. code-block:: c
+
+ s32 BPF_STRUCT_OPS(dummy_init)
+ {
+ if (switch_all)
+ scx_bpf_switch_all();
+ return 0;
+ }
+
+ void BPF_STRUCT_OPS(dummy_enqueue, struct task_struct *p, u64 enq_flags)
+ {
+ if (enq_flags & SCX_ENQ_LOCAL)
+ scx_bpf_dispatch(p, SCX_DSQ_LOCAL, enq_flags);
+ else
+ scx_bpf_dispatch(p, SCX_DSQ_GLOBAL, enq_flags);
+ }
+
+ void BPF_STRUCT_OPS(dummy_exit, struct scx_exit_info *ei)
+ {
+ exit_type = ei->type;
+ }
+
+ SEC(".struct_ops")
+ struct sched_ext_ops dummy_ops = {
+ .enqueue = (void *)dummy_enqueue,
+ .init = (void *)dummy_init,
+ .exit = (void *)dummy_exit,
+ .name = "dummy",
+ };
+
+Dispatch Queues
+---------------
+
+To match the impedance between the scheduler core and the BPF scheduler,
+sched_ext uses simple FIFOs called DSQs (dispatch queues). By default, there
+is one global FIFO (``SCX_DSQ_GLOBAL``), and one local dsq per CPU
+(``SCX_DSQ_LOCAL``). The BPF scheduler can manage an arbitrary number of
+dsq's using ``scx_bpf_create_dsq()`` and ``scx_bpf_destroy_dsq()``.
+
+A CPU always executes a task from its local DSQ. A task is "dispatched" to a
+DSQ. A non-local DSQ is "consumed" to transfer a task to the consuming CPU's
+local DSQ.
+
+When a CPU is looking for the next task to run, if the local DSQ is not
+empty, the first task is picked. Otherwise, the CPU tries to consume the
+global DSQ. If that doesn't yield a runnable task either, ``ops.dispatch()``
+is invoked.
+
+Scheduling Cycle
+----------------
+
+The following briefly shows how a waking task is scheduled and executed.
+
+1. When a task is waking up, ``ops.select_cpu()`` is the first operation
+ invoked. This serves two purposes. First, CPU selection optimization
+ hint. Second, waking up the selected CPU if idle.
+
+ The CPU selected by ``ops.select_cpu()`` is an optimization hint and not
+ binding. The actual decision is made at the last step of scheduling.
+ However, there is a small performance gain if the CPU
+ ``ops.select_cpu()`` returns matches the CPU the task eventually runs on.
+
+ A side-effect of selecting a CPU is waking it up from idle. While a BPF
+ scheduler can wake up any cpu using the ``scx_bpf_kick_cpu()`` helper,
+ using ``ops.select_cpu()`` judiciously can be simpler and more efficient.
+
+ Note that the scheduler core will ignore an invalid CPU selection, for
+ example, if it's outside the allowed cpumask of the task.
+
+2. Once the target CPU is selected, ``ops.enqueue()`` is invoked. It can
+ make one of the following decisions:
+
+ * Immediately dispatch the task to either the global or local DSQ by
+ calling ``scx_bpf_dispatch()`` with ``SCX_DSQ_GLOBAL`` or
+ ``SCX_DSQ_LOCAL``, respectively.
+
+ * Immediately dispatch the task to a custom DSQ by calling
+ ``scx_bpf_dispatch()`` with a DSQ ID which is smaller than 2^63.
+
+ * Queue the task on the BPF side.
+
+3. When a CPU is ready to schedule, it first looks at its local DSQ. If
+ empty, it then looks at the global DSQ. If there still isn't a task to
+ run, ``ops.dispatch()`` is invoked which can use the following two
+ functions to populate the local DSQ.
+
+ * ``scx_bpf_dispatch()`` dispatches a task to a DSQ. Any target DSQ can
+ be used - ``SCX_DSQ_LOCAL``, ``SCX_DSQ_LOCAL_ON | cpu``,
+ ``SCX_DSQ_GLOBAL`` or a custom DSQ. While ``scx_bpf_dispatch()``
+ currently can't be called with BPF locks held, this is being worked on
+ and will be supported. ``scx_bpf_dispatch()`` schedules dispatching
+ rather than performing them immediately. There can be up to
+ ``ops.dispatch_max_batch`` pending tasks.
+
+ * ``scx_bpf_consume()`` tranfers a task from the specified non-local DSQ
+ to the dispatching DSQ. This function cannot be called with any BPF
+ locks held. ``scx_bpf_consume()`` flushes the pending dispatched tasks
+ before trying to consume the specified DSQ.
+
+4. After ``ops.dispatch()`` returns, if there are tasks in the local DSQ,
+ the CPU runs the first one. If empty, the following steps are taken:
+
+ * Try to consume the global DSQ. If successful, run the task.
+
+ * If ``ops.dispatch()`` has dispatched any tasks, retry #3.
+
+ * If the previous task is an SCX task and still runnable, keep executing
+ it (see ``SCX_OPS_ENQ_LAST``).
+
+ * Go idle.
+
+Note that the BPF scheduler can always choose to dispatch tasks immediately
+in ``ops.enqueue()`` as illustrated in the above dummy example. If only the
+built-in DSQs are used, there is no need to implement ``ops.dispatch()`` as
+a task is never queued on the BPF scheduler and both the local and global
+DSQs are consumed automatically.
+
+Where to Look
+=============
+
+* ``include/linux/sched/ext.h`` defines the core data structures, ops table
+ and constants.
+
+* ``kernel/sched/ext.c`` contains sched_ext core implementation and helpers.
+ The functions prefixed with ``scx_bpf_`` can be called from the BPF
+ scheduler.
+
+* ``tools/sched_ext/`` hosts example BPF scheduler implementations.
+
+ * ``scx_example_dummy[.bpf].c``: Minimal global FIFO scheduler example
+ using a custom DSQ.
+
+ * ``scx_example_qmap[.bpf].c``: A multi-level FIFO scheduler supporting
+ five levels of priority implemented with ``BPF_MAP_TYPE_QUEUE``.
+
+ABI Instability
+===============
+
+The APIs provided by sched_ext to BPF schedulers programs have no stability
+guarantees. This includes the ops table callbacks and constants defined in
+``include/linux/sched/ext.h``, as well as the ``scx_bpf_`` kfuncs defined in
+``kernel/sched/ext.c``.
+
+While we will attempt to provide a relatively stable API surface when
+possible, they are subject to change without warning between kernel
+versions.
@@ -1,5 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
+ * BPF extensible scheduler class: Documentation/scheduler/sched-ext.rst
+ *
* Copyright (c) 2022 Meta Platforms, Inc. and affiliates.
* Copyright (c) 2022 Tejun Heo <tj@kernel.org>
* Copyright (c) 2022 David Vernet <dvernet@meta.com>
@@ -154,3 +154,5 @@ config SCHED_CLASS_EXT
wish to implement scheduling policies. The struct_ops structure
exported by sched_ext is struct sched_ext_ops, and is conceptually
similar to struct sched_class.
+
+ See Documentation/scheduler/sched-ext.rst for more details.
@@ -1,5 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
+ * BPF extensible scheduler class: Documentation/scheduler/sched-ext.rst
+ *
* Copyright (c) 2022 Meta Platforms, Inc. and affiliates.
* Copyright (c) 2022 Tejun Heo <tj@kernel.org>
* Copyright (c) 2022 David Vernet <dvernet@meta.com>
@@ -1,5 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
+ * BPF extensible scheduler class: Documentation/scheduler/sched-ext.rst
+ *
* Copyright (c) 2022 Meta Platforms, Inc. and affiliates.
* Copyright (c) 2022 Tejun Heo <tj@kernel.org>
* Copyright (c) 2022 David Vernet <dvernet@meta.com>
Add Documentation/scheduler/sched-ext.rst which gives a high-level overview and pointers to the examples. v2: Apply minor edits suggested by Bagas. Caveats section dropped as all of them are addressed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: David Vernet <dvernet@meta.com> Acked-by: Josh Don <joshdon@google.com> Acked-by: Hao Luo <haoluo@google.com> Acked-by: Barret Rhoden <brho@google.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> --- Documentation/scheduler/index.rst | 1 + Documentation/scheduler/sched-ext.rst | 224 ++++++++++++++++++++++++++ include/linux/sched/ext.h | 2 + kernel/Kconfig.preempt | 2 + kernel/sched/ext.c | 2 + kernel/sched/ext.h | 2 + 6 files changed, 233 insertions(+) create mode 100644 Documentation/scheduler/sched-ext.rst