diff mbox series

[v2,2/4] Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855

Message ID 20230131043816.4525-3-steev@kali.org (mailing list archive)
State Superseded
Headers show
Series Attempt at adding WCN6855 BT support | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Steev Klimaszewski Jan. 31, 2023, 4:38 a.m. UTC 
Added regulators,GPIOs and changes required to power on/off wcn6855.
Added support for firmware download for wcn6855.

This is based on commit d8f97da1b92d ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750")

Signed-off-by: Steev Klimaszewski <steev@kali.org>
---
Changes since v1:
* No changes requested yet.
---
 drivers/bluetooth/btqca.c   | 24 +++++++++++++--
 drivers/bluetooth/btqca.h   | 10 +++++++
 drivers/bluetooth/hci_qca.c | 59 +++++++++++++++++++++++++++++--------
 3 files changed, 78 insertions(+), 15 deletions(-)

Comments

Krzysztof Kozlowski Jan. 31, 2023, 7 p.m. UTC | #1 
On 31/01/2023 05:38, Steev Klimaszewski wrote:
> Added regulators,GPIOs and changes required to power on/off wcn6855.
> Added support for firmware download for wcn6855.
> 
> This is based on commit d8f97da1b92d ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750")

Drop. If that commit is merged, how is it useful to keep it in git
history forever?

Dependencies go to the cover letter or under ---.


Best regards,
Krzysztof
Steev Klimaszewski Feb. 1, 2023, 3:05 a.m. UTC | #2 
>On 31/01/2023 05:38, Steev Klimaszewski wrote:
>> Added regulators,GPIOs and changes required to power on/off wcn6855.
>> Added support for firmware download for wcn6855.
>> 
>> This is based on commit d8f97da1b92d ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750")

>Drop. If that commit is merged, how is it useful to keep it in git
>history forever?

Sorry if that wasn't clear enough, what I meant to say here is that I used that
commit id as the basis for my work, and it's not based on having access to the
schematics or spec sheets.

-- steev
Krzysztof Kozlowski Feb. 1, 2023, 7:19 a.m. UTC | #3 
On 01/02/2023 04:05, Steev Klimaszewski wrote:
>> On 31/01/2023 05:38, Steev Klimaszewski wrote:
>>> Added regulators,GPIOs and changes required to power on/off wcn6855.
>>> Added support for firmware download for wcn6855.
>>>
>>> This is based on commit d8f97da1b92d ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750")
> 
>> Drop. If that commit is merged, how is it useful to keep it in git
>> history forever?
> 
> Sorry if that wasn't clear enough, what I meant to say here is that I used that
> commit id as the basis for my work, and it's not based on having access to the
> schematics or spec sheets.

Hm, I still don't find it useful then.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index c9064d34d830..456b961b9554 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -472,6 +472,19 @@  static int qca_download_firmware(struct hci_dev *hdev,
 					   config->fwname, ret);
 				return ret;
 			}
+		} else if (soc_type == QCA_WCN6855 && config->type == ELF_TYPE_PATCH) {
+			bt_dev_dbg(hdev, "QCA Failed to request file: %s (%d)",
+				   config->fwname, ret);
+			config->type = TLV_TYPE_PATCH;
+			snprintf(config->fwname, sizeof(config->fwname),
+				 "qca/hpbtfw%02x.tlv", rom_ver);
+			bt_dev_info(hdev, "QCA Downloading %s", config->fwname);
+			ret = request_firmware(&fw, config->fwname, &hdev->dev);
+			if (ret) {
+				bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
+					   config->fwname, ret);
+				return ret;
+			}
 		} else {
 			bt_dev_err(hdev, "QCA Failed to request file: %s (%d)",
 				   config->fwname, ret);
@@ -596,7 +609,7 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	 */
 	rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
 
-	if (soc_type == QCA_WCN6750)
+	if (soc_type == QCA_WCN6750 || soc_type == QCA_WCN6855)
 		qca_send_patch_config_cmd(hdev);
 
 	/* Download rampatch file */
@@ -614,6 +627,9 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		config.type = ELF_TYPE_PATCH;
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/msbtfw%02x.mbn", rom_ver);
+	} else if (soc_type == QCA_WCN6855) {
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/hpbtfw%02x.tlv", rom_ver);
 	} else {
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/rampatch_%08x.bin", soc_ver);
@@ -648,6 +664,9 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	else if (soc_type == QCA_WCN6750)
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/msnv%02x.bin", rom_ver);
+	else if (soc_type == QCA_WCN6855)
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/hpnv%02x.bin", rom_ver);
 	else
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/nvm_%08x.bin", soc_ver);
@@ -672,6 +691,7 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	case QCA_WCN3991:
 	case QCA_WCN3998:
 	case QCA_WCN6750:
+	case QCA_WCN6855:
 		hci_set_msft_opcode(hdev, 0xFD70);
 		break;
 	default:
@@ -685,7 +705,7 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		return err;
 	}
 
-	if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750) {
+	if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750 || soc_type == QCA_WCN6855) {
 		/* get fw build info */
 		err = qca_read_fw_build_info(hdev);
 		if (err < 0)
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 61e9a50e66ae..b884095bcd9d 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -147,6 +147,7 @@  enum qca_btsoc_type {
 	QCA_WCN3991,
 	QCA_QCA6390,
 	QCA_WCN6750,
+	QCA_WCN6855,
 };
 
 #if IS_ENABLED(CONFIG_BT_QCA)
@@ -168,6 +169,10 @@  static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
 {
 	return soc_type == QCA_WCN6750;
 }
+static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
+{
+	return soc_type == QCA_WCN6855;
+}
 
 #else
 
@@ -206,6 +211,11 @@  static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
 	return false;
 }
 
+static inline bool qca_is_wcn6855(enum qca_btsoc_type soc_type)
+{
+	return false;
+}
+
 static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
 {
 	return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index a5c19f32926b..18e2882772f9 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -606,7 +606,8 @@  static int qca_open(struct hci_uart *hu)
 		qcadev = serdev_device_get_drvdata(hu->serdev);
 
 		if (qca_is_wcn399x(qcadev->btsoc_type) ||
-		    qca_is_wcn6750(qcadev->btsoc_type))
+		    qca_is_wcn6750(qcadev->btsoc_type) ||
+		    qca_is_wcn6855(qcadev->btsoc_type))
 			hu->init_speed = qcadev->init_speed;
 
 		if (qcadev->oper_speed)
@@ -1317,7 +1318,8 @@  static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 
 	/* Give the controller time to process the request */
 	if (qca_is_wcn399x(qca_soc_type(hu)) ||
-	    qca_is_wcn6750(qca_soc_type(hu)))
+	    qca_is_wcn6750(qca_soc_type(hu)) ||
+	    qca_is_wcn6855(qca_soc_type(hu)))
 		usleep_range(1000, 10000);
 	else
 		msleep(300);
@@ -1394,7 +1396,8 @@  static unsigned int qca_get_speed(struct hci_uart *hu,
 static int qca_check_speeds(struct hci_uart *hu)
 {
 	if (qca_is_wcn399x(qca_soc_type(hu)) ||
-	    qca_is_wcn6750(qca_soc_type(hu))) {
+	    qca_is_wcn6750(qca_soc_type(hu)) ||
+	    qca_is_wcn6855(qca_soc_type(hu))) {
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
@@ -1428,7 +1431,8 @@  static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		 * changing the baudrate of chip and host.
 		 */
 		if (qca_is_wcn399x(soc_type) ||
-		    qca_is_wcn6750(soc_type))
+		    qca_is_wcn6750(soc_type) ||
+		    qca_is_wcn6855(soc_type))
 			hci_uart_set_flow_control(hu, true);
 
 		if (soc_type == QCA_WCN3990) {
@@ -1446,7 +1450,8 @@  static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 
 error:
 		if (qca_is_wcn399x(soc_type) ||
-		    qca_is_wcn6750(soc_type))
+		    qca_is_wcn6750(soc_type) ||
+		    qca_is_wcn6855(soc_type))
 			hci_uart_set_flow_control(hu, false);
 
 		if (soc_type == QCA_WCN3990) {
@@ -1681,7 +1686,8 @@  static int qca_power_on(struct hci_dev *hdev)
 		return 0;
 
 	if (qca_is_wcn399x(soc_type) ||
-	    qca_is_wcn6750(soc_type)) {
+	    qca_is_wcn6750(soc_type) ||
+	    qca_is_wcn6855(soc_type)) {
 		ret = qca_regulator_init(hu);
 	} else {
 		qcadev = serdev_device_get_drvdata(hu->serdev);
@@ -1722,7 +1728,8 @@  static int qca_setup(struct hci_uart *hu)
 
 	bt_dev_info(hdev, "setting up %s",
 		qca_is_wcn399x(soc_type) ? "wcn399x" :
-		(soc_type == QCA_WCN6750) ? "wcn6750" : "ROME/QCA6390");
+		(soc_type == QCA_WCN6750) ? "wcn6750" :
+		(soc_type == QCA_WCN6855) ? "wcn6855" : "ROME/QCA6390");
 
 	qca->memdump_state = QCA_MEMDUMP_IDLE;
 
@@ -1734,7 +1741,8 @@  static int qca_setup(struct hci_uart *hu)
 	clear_bit(QCA_SSR_TRIGGERED, &qca->flags);
 
 	if (qca_is_wcn399x(soc_type) ||
-	    qca_is_wcn6750(soc_type)) {
+	    qca_is_wcn6750(soc_type) ||
+	    qca_is_wcn6855(soc_type)) {
 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 		hci_set_aosp_capable(hdev);
 
@@ -1756,7 +1764,8 @@  static int qca_setup(struct hci_uart *hu)
 	}
 
 	if (!(qca_is_wcn399x(soc_type) ||
-	     qca_is_wcn6750(soc_type))) {
+	     qca_is_wcn6750(soc_type) ||
+	     qca_is_wcn6855(soc_type))) {
 		/* Get QCA version information */
 		ret = qca_read_soc_version(hdev, &ver, soc_type);
 		if (ret)
@@ -1882,6 +1891,23 @@  static const struct qca_device_data qca_soc_data_wcn6750 = {
 	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
 };
 
+static const struct qca_device_data qca_soc_data_wcn6855 = {
+	.soc_type = QCA_WCN6855,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio", 5000 },
+		{ "vddaon", 26000 },
+		{ "vddbtcxmx", 126000 },
+		{ "vddrfacmn", 12500 },
+		{ "vddrfa0p8", 102000 },
+		{ "vddrfa1p7", 302000 },
+		{ "vddrfa1p2", 257000 },
+		{ "vddrfa2p2", 1700000 },
+		{ "vddasd", 200 },
+	},
+	.num_vregs = 9,
+	.capabilities = QCA_CAP_WIDEBAND_SPEECH | QCA_CAP_VALID_LE_STATES,
+};
+
 static void qca_power_shutdown(struct hci_uart *hu)
 {
 	struct qca_serdev *qcadev;
@@ -2046,7 +2072,8 @@  static int qca_serdev_probe(struct serdev_device *serdev)
 
 	if (data &&
 	    (qca_is_wcn399x(data->soc_type) ||
-	    qca_is_wcn6750(data->soc_type))) {
+	    qca_is_wcn6750(data->soc_type) ||
+	    qca_is_wcn6855(data->soc_type))) {
 		qcadev->btsoc_type = data->soc_type;
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
@@ -2066,14 +2093,18 @@  static int qca_serdev_probe(struct serdev_device *serdev)
 
 		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
 					       GPIOD_OUT_LOW);
-		if (IS_ERR_OR_NULL(qcadev->bt_en) && data->soc_type == QCA_WCN6750) {
+		if (IS_ERR_OR_NULL(qcadev->bt_en)
+		    && (data->soc_type == QCA_WCN6750 ||
+			data->soc_type == QCA_WCN6855)) {
 			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
 			power_ctrl_enabled = false;
 		}
 
 		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
 					       GPIOD_IN);
-		if (IS_ERR_OR_NULL(qcadev->sw_ctrl) && data->soc_type == QCA_WCN6750)
+		if (IS_ERR_OR_NULL(qcadev->sw_ctrl)
+		    && (data->soc_type == QCA_WCN6750 ||
+			data->soc_type == QCA_WCN6855))
 			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
 
 		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
@@ -2149,7 +2180,8 @@  static void qca_serdev_remove(struct serdev_device *serdev)
 	struct qca_power *power = qcadev->bt_power;
 
 	if ((qca_is_wcn399x(qcadev->btsoc_type) ||
-	     qca_is_wcn6750(qcadev->btsoc_type)) &&
+	     qca_is_wcn6750(qcadev->btsoc_type) ||
+	     qca_is_wcn6855(qcadev->btsoc_type)) &&
 	     power->vregs_on)
 		qca_power_shutdown(&qcadev->serdev_hu);
 	else if (qcadev->susclk)
@@ -2334,6 +2366,7 @@  static const struct of_device_id qca_bluetooth_of_match[] = {
 	{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
 	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
 	{ .compatible = "qcom,wcn6750-bt", .data = &qca_soc_data_wcn6750},
+	{ .compatible = "qcom,wcn6855-bt", .data = &qca_soc_data_wcn6855},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);