From patchwork Wed Feb 1 06:58:07 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Frank Sae X-Patchwork-Id: 13123850 X-Patchwork-Delegate: kuba@kernel.org Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E5752C636D4 for ; Wed, 1 Feb 2023 06:58:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231476AbjBAG6e (ORCPT ); Wed, 1 Feb 2023 01:58:34 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40550 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231273AbjBAG6c (ORCPT ); Wed, 1 Feb 2023 01:58:32 -0500 Received: from out28-196.mail.aliyun.com (out28-196.mail.aliyun.com [115.124.28.196]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7418C3EC43; Tue, 31 Jan 2023 22:58:30 -0800 (PST) X-Alimail-AntiSpam: AC=CONTINUE;BC=0.141339|-1;CH=green;DM=|CONTINUE|false|;DS=CONTINUE|ham_system_inform|0.0641746-0.000645032-0.93518;FP=0|0|0|0|0|-1|-1|-1;HT=ay29a033018047201;MF=frank.sae@motor-comm.com;NM=1;PH=DS;RN=18;RT=18;SR=0;TI=SMTPD_---.R6w7.oU_1675234704; Received: from sun-VirtualBox..(mailfrom:Frank.Sae@motor-comm.com fp:SMTPD_---.R6w7.oU_1675234704) by smtp.aliyun-inc.com; Wed, 01 Feb 2023 14:58:25 +0800 From: Frank Sae To: Peter Geis , Andrew Lunn , Heiner Kallweit , Russell King , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , yanhong.wang@starfivetech.com Cc: xiaogang.fan@motor-comm.com, fei.zhang@motor-comm.com, hua.sun@motor-comm.com, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, Frank , devicetree@vger.kernel.org Subject: [PATCH net-next v4 1/5] dt-bindings: net: Add Motorcomm yt8xxx ethernet phy Date: Wed, 1 Feb 2023 14:58:07 +0800 Message-Id: <20230201065811.3650-2-Frank.Sae@motor-comm.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230201065811.3650-1-Frank.Sae@motor-comm.com> References: <20230201065811.3650-1-Frank.Sae@motor-comm.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org X-Patchwork-Delegate: kuba@kernel.org Add a YAML binding document for the Motorcomm yt8xxx Ethernet phy. Signed-off-by: Frank Sae --- .../bindings/net/motorcomm,yt8xxx.yaml | 119 ++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 1 + 3 files changed, 122 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml new file mode 100644 index 000000000000..6ce93404e1f1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/motorcomm,yt8xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MotorComm yt8xxx Ethernet PHY + +maintainers: + - frank sae + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + compatible: + oneOf: + - const: ethernet-phy-id4f51.e91a + description: Only needed for DT lint tools, yt8531s phy + - const: ethernet-phy-id4f51.e91b + description: Only needed for DT lint tools, yt8531 phy + + rx-internal-delay-ps: + description: | + RGMII RX Clock Delay used only when PHY operates in RGMII mode with + internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds. + enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, + 1800, 1900, 1950, 2050, 2100, 2200, 2250, 2350, 2500, 2650, 2800, + 2950, 3100, 3250, 3400, 3550, 3700, 3850, 4000, 4150 ] + default: 1950 + + tx-internal-delay-ps: + description: | + RGMII TX Clock Delay used only when PHY operates in RGMII mode with + internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds. + enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800, + 1950, 2100, 2250 ] + default: 1950 + + motorcomm,clk-out-frequency-hz: + description: clock output on clock output pin. + enum: [0, 25000000, 125000000] + default: 0 + + motorcomm,keep-pll-enabled: + description: | + If set, keep the PLL enabled even if there is no link. Useful if you + want to use the clock output without an ethernet link. + type: boolean + + motorcomm,auto-sleep-disabled: + description: | + If set, PHY will not enter sleep mode and close AFE after unplug cable + for a timer. + type: boolean + + motorcomm,tx-clk-adj-enabled: + description: | + This configuration is mainly to adapt to VF2 with JH7110 SoC. + Useful if you want to use tx-clk-xxxx-inverted to adj the delay of tx clk. + type: boolean + + motorcomm,tx-clk-10-inverted: + description: | + Use original or inverted RGMII Transmit PHY Clock to drive the RGMII + Transmit PHY Clock delay train configuration when speed is 10Mbps. + type: boolean + + motorcomm,tx-clk-100-inverted: + description: | + Use original or inverted RGMII Transmit PHY Clock to drive the RGMII + Transmit PHY Clock delay train configuration when speed is 100Mbps. + type: boolean + + motorcomm,tx-clk-1000-inverted: + description: | + Use original or inverted RGMII Transmit PHY Clock to drive the RGMII + Transmit PHY Clock delay train configuration when speed is 1000Mbps. + type: boolean + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy-mode = "rgmii-id"; + ethernet-phy@4 { + /* Only needed to make DT lint tools work. Do not copy/paste + * into real DTS files. + */ + compatible = "ethernet-phy-id4f51.e91a"; + + reg = <4>; + rx-internal-delay-ps = <2100>; + tx-internal-delay-ps = <150>; + motorcomm,clk-out-frequency-hz = <0>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + }; + }; + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy-mode = "rgmii"; + ethernet-phy@5 { + /* Only needed to make DT lint tools work. Do not copy/paste + * into real DTS files. + */ + compatible = "ethernet-phy-id4f51.e91a"; + + reg = <5>; + motorcomm,clk-out-frequency-hz = <125000000>; + motorcomm,keep-pll-enabled; + motorcomm,auto-sleep-disabled; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 161766b1de50..99bb8594753c 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -847,6 +847,8 @@ patternProperties: description: Moortec Semiconductor Ltd. "^mosaixtech,.*": description: Mosaix Technologies, Inc. + "^motorcomm,.*": + description: MotorComm, Inc. "^motorola,.*": description: Motorola, Inc. "^moxa,.*": diff --git a/MAINTAINERS b/MAINTAINERS index 8cdba0580cb8..1da8c3b52108 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14161,6 +14161,7 @@ M: Peter Geis M: Frank L: netdev@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml F: drivers/net/phy/motorcomm.c MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD