diff mbox series

[net-next,v3] gve: Introduce a way to disable queue formats

Message ID 20230201155722.110460-1-jeroendb@google.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series [net-next,v3] gve: Introduce a way to disable queue formats | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 8 maintainers not CCed: shailend@google.com pabeni@redhat.com tglx@linutronix.de csully@google.com bpf@vger.kernel.org jesse.brandeburg@intel.com edumazet@google.com bigeasy@linutronix.de
netdev/build_clang fail Errors and warnings before: 3 this patch: 4
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 280 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Jeroen de Borst Feb. 1, 2023, 3:57 p.m. UTC 
The device is capable of simultaneously supporting multiple
queue formats. These queue formats are:

- GQI-QPL: A queue format with in-order completions and a
bounce-buffer (Queue Page List)
- GQI-RDA: A queue format with in-order completions and no
bounce-buffer (Raw DMA Access)
- DQO-RDA: A queue format with out-of-order completions and
no bounce buffer

With this change the driver can deliberately pick a queue format.

Signed-off-by: Jeroen de Borst <jeroendb@google.com>
---
Changed in v2:
- Documented queue formats and addressed nits.
Changed in v3:
- Move changelog below trailer
---
 drivers/net/ethernet/google/gve/gve.h         | 28 +++++++++
 drivers/net/ethernet/google/gve/gve_adminq.c  | 35 +++++++-----
 drivers/net/ethernet/google/gve/gve_ethtool.c | 57 ++++++++++++-------
 drivers/net/ethernet/google/gve/gve_main.c    | 26 ++++++++-
 4 files changed, 109 insertions(+), 37 deletions(-)

Comments

Leon Romanovsky Feb. 2, 2023, 8:07 a.m. UTC | #1 
On Wed, Feb 01, 2023 at 07:57:22AM -0800, Jeroen de Borst wrote:
> The device is capable of simultaneously supporting multiple
> queue formats. These queue formats are:
> 
> - GQI-QPL: A queue format with in-order completions and a
> bounce-buffer (Queue Page List)
> - GQI-RDA: A queue format with in-order completions and no
> bounce-buffer (Raw DMA Access)
> - DQO-RDA: A queue format with out-of-order completions and
> no bounce buffer
> 
> With this change the driver can deliberately pick a queue format.
> 
> Signed-off-by: Jeroen de Borst <jeroendb@google.com>
> ---
> Changed in v2:
> - Documented queue formats and addressed nits.
> Changed in v3:
> - Move changelog below trailer
> ---
>  drivers/net/ethernet/google/gve/gve.h         | 28 +++++++++
>  drivers/net/ethernet/google/gve/gve_adminq.c  | 35 +++++++-----
>  drivers/net/ethernet/google/gve/gve_ethtool.c | 57 ++++++++++++-------
>  drivers/net/ethernet/google/gve/gve_main.c    | 26 ++++++++-
>  4 files changed, 109 insertions(+), 37 deletions(-)

<...>

>  	priv->queue_format = GVE_QUEUE_FORMAT_UNSPECIFIED;
>  	/* Get the initial information we need from the device */
>  	err = gve_adminq_describe_device(priv);
> @@ -1661,6 +1680,7 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>  	priv->service_task_flags = 0x0;
>  	priv->state_flags = 0x0;
>  	priv->ethtool_flags = 0x0;
> +	priv->ethtool_formats = 0x0;
>  

There is no need to assign zeroes to priv as it is allocated with kvzalloc.

Thanks,
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h
index 64eb0442c82f..68f9bf9f216d 100644
--- a/drivers/net/ethernet/google/gve/gve.h
+++ b/drivers/net/ethernet/google/gve/gve.h
@@ -505,6 +505,8 @@  enum gve_queue_format {
 	GVE_DQO_RDA_FORMAT		= 0x3,
 };
 
+const char *gve_queue_format_name(enum gve_queue_format format);
+
 struct gve_priv {
 	struct net_device *dev;
 	struct gve_tx_ring *tx; /* array of tx_cfg.num_queues */
@@ -584,6 +586,7 @@  struct gve_priv {
 	u64 stats_report_len;
 	dma_addr_t stats_report_bus; /* dma address for the stats report */
 	unsigned long ethtool_flags;
+	unsigned long ethtool_formats; /* queue formats allowed */
 
 	unsigned long stats_report_timer_period;
 	struct timer_list stats_report_timer;
@@ -599,6 +602,7 @@  struct gve_priv {
 	int data_buffer_size_dqo;
 
 	enum gve_queue_format queue_format;
+	enum gve_queue_format next_queue_format;
 
 	/* Interrupt coalescing settings */
 	u32 tx_coalesce_usecs;
@@ -621,8 +625,17 @@  enum gve_state_flags_bit {
 
 enum gve_ethtool_flags_bit {
 	GVE_PRIV_FLAGS_REPORT_STATS		= 0,
+	GVE_PRIV_FLAGS_ENABLE_DQO_RDA		= 1,
+	GVE_PRIV_FLAGS_ENABLE_GQI_RDA		= 2,
+	GVE_PRIV_FLAGS_ENABLE_GQI_QPL		= 3,
 };
 
+#define GVE_PRIV_FLAGS_MASK \
+	(BIT(GVE_PRIV_FLAGS_REPORT_STATS)	| \
+	 BIT(GVE_PRIV_FLAGS_ENABLE_DQO_RDA)	| \
+	 BIT(GVE_PRIV_FLAGS_ENABLE_GQI_RDA)	| \
+	 BIT(GVE_PRIV_FLAGS_ENABLE_GQI_QPL))
+
 static inline bool gve_get_do_reset(struct gve_priv *priv)
 {
 	return test_bit(GVE_PRIV_FLAGS_DO_RESET, &priv->service_task_flags);
@@ -756,6 +769,21 @@  static inline void gve_clear_report_stats(struct gve_priv *priv)
 	clear_bit(GVE_PRIV_FLAGS_REPORT_STATS, &priv->ethtool_flags);
 }
 
+static inline bool gve_get_enable_dqo_rda(struct gve_priv *priv)
+{
+	return test_bit(GVE_PRIV_FLAGS_ENABLE_DQO_RDA, &priv->ethtool_flags);
+}
+
+static inline bool gve_get_enable_gqi_rda(struct gve_priv *priv)
+{
+	return test_bit(GVE_PRIV_FLAGS_ENABLE_GQI_RDA, &priv->ethtool_flags);
+}
+
+static inline bool gve_get_enable_gqi_qpl(struct gve_priv *priv)
+{
+	return test_bit(GVE_PRIV_FLAGS_ENABLE_GQI_QPL, &priv->ethtool_flags);
+}
+
 /* Returns the address of the ntfy_blocks irq doorbell
  */
 static inline __be32 __iomem *gve_irq_doorbell(struct gve_priv *priv,
diff --git a/drivers/net/ethernet/google/gve/gve_adminq.c b/drivers/net/ethernet/google/gve/gve_adminq.c
index 60061288ad9d..d8bf761ef133 100644
--- a/drivers/net/ethernet/google/gve/gve_adminq.c
+++ b/drivers/net/ethernet/google/gve/gve_adminq.c
@@ -59,10 +59,9 @@  void gve_parse_device_option(struct gve_priv *priv,
 				 option_length, req_feat_mask);
 			break;
 		}
-
 		dev_info(&priv->pdev->dev,
 			 "Gqi raw addressing device option enabled.\n");
-		priv->queue_format = GVE_GQI_RDA_FORMAT;
+		priv->ethtool_formats |= BIT(GVE_PRIV_FLAGS_ENABLE_GQI_RDA);
 		break;
 	case GVE_DEV_OPT_ID_GQI_RDA:
 		if (option_length < sizeof(**dev_op_gqi_rda) ||
@@ -79,6 +78,7 @@  void gve_parse_device_option(struct gve_priv *priv,
 				 GVE_DEVICE_OPTION_TOO_BIG_FMT, "GQI RDA");
 		}
 		*dev_op_gqi_rda = (void *)(option + 1);
+		priv->ethtool_formats |= BIT(GVE_PRIV_FLAGS_ENABLE_GQI_RDA);
 		break;
 	case GVE_DEV_OPT_ID_GQI_QPL:
 		if (option_length < sizeof(**dev_op_gqi_qpl) ||
@@ -95,6 +95,7 @@  void gve_parse_device_option(struct gve_priv *priv,
 				 GVE_DEVICE_OPTION_TOO_BIG_FMT, "GQI QPL");
 		}
 		*dev_op_gqi_qpl = (void *)(option + 1);
+		priv->ethtool_formats |= BIT(GVE_PRIV_FLAGS_ENABLE_GQI_QPL);
 		break;
 	case GVE_DEV_OPT_ID_DQO_RDA:
 		if (option_length < sizeof(**dev_op_dqo_rda) ||
@@ -111,6 +112,7 @@  void gve_parse_device_option(struct gve_priv *priv,
 				 GVE_DEVICE_OPTION_TOO_BIG_FMT, "DQO RDA");
 		}
 		*dev_op_dqo_rda = (void *)(option + 1);
+		priv->ethtool_formats |= BIT(GVE_PRIV_FLAGS_ENABLE_DQO_RDA);
 		break;
 	case GVE_DEV_OPT_ID_JUMBO_FRAMES:
 		if (option_length < sizeof(**dev_op_jumbo_frames) ||
@@ -737,33 +739,36 @@  int gve_adminq_describe_device(struct gve_priv *priv)
 	if (err)
 		goto free_device_descriptor;
 
+	priv->ethtool_flags = priv->ethtool_formats;
+
 	/* If the GQI_RAW_ADDRESSING option is not enabled and the queue format
 	 * is not set to GqiRda, choose the queue format in a priority order:
 	 * DqoRda, GqiRda, GqiQpl. Use GqiQpl as default.
 	 */
 	if (dev_op_dqo_rda) {
 		priv->queue_format = GVE_DQO_RDA_FORMAT;
-		dev_info(&priv->pdev->dev,
-			 "Driver is running with DQO RDA queue format.\n");
 		supported_features_mask =
 			be32_to_cpu(dev_op_dqo_rda->supported_features_mask);
 	} else if (dev_op_gqi_rda) {
 		priv->queue_format = GVE_GQI_RDA_FORMAT;
-		dev_info(&priv->pdev->dev,
-			 "Driver is running with GQI RDA queue format.\n");
 		supported_features_mask =
 			be32_to_cpu(dev_op_gqi_rda->supported_features_mask);
-	} else if (priv->queue_format == GVE_GQI_RDA_FORMAT) {
-		dev_info(&priv->pdev->dev,
-			 "Driver is running with GQI RDA queue format.\n");
-	} else {
+	} else if (dev_op_gqi_qpl) {
 		priv->queue_format = GVE_GQI_QPL_FORMAT;
-		if (dev_op_gqi_qpl)
-			supported_features_mask =
-				be32_to_cpu(dev_op_gqi_qpl->supported_features_mask);
-		dev_info(&priv->pdev->dev,
-			 "Driver is running with GQI QPL queue format.\n");
+		supported_features_mask =
+			be32_to_cpu(dev_op_gqi_qpl->supported_features_mask);
+	} else if (gve_get_enable_gqi_rda(priv)) {
+		priv->queue_format = GVE_GQI_RDA_FORMAT;
+	} else {
+		dev_err(&priv->pdev->dev, "No compatible queue formats\n");
+		err = -EINVAL;
+		goto free_device_descriptor;
 	}
+	dev_info(&priv->pdev->dev, "Driver is running with %s queue format.\n",
+		 gve_queue_format_name(priv->queue_format));
+
+	priv->next_queue_format = priv->queue_format;
+
 	if (gve_is_gqi(priv)) {
 		err = gve_set_desc_cnt(priv, descriptor);
 	} else {
diff --git a/drivers/net/ethernet/google/gve/gve_ethtool.c b/drivers/net/ethernet/google/gve/gve_ethtool.c
index ce574d097e28..9e36d2c450f7 100644
--- a/drivers/net/ethernet/google/gve/gve_ethtool.c
+++ b/drivers/net/ethernet/google/gve/gve_ethtool.c
@@ -68,7 +68,7 @@  static const char gve_gstrings_adminq_stats[][ETH_GSTRING_LEN] = {
 };
 
 static const char gve_gstrings_priv_flags[][ETH_GSTRING_LEN] = {
-	"report-stats",
+	"report-stats", "enable-dqo-rda", "enable-gqi-rda", "enable-gqi-qpl",
 };
 
 #define GVE_MAIN_STATS_LEN  ARRAY_SIZE(gve_gstrings_main_stats)
@@ -490,37 +490,36 @@  static int gve_set_tunable(struct net_device *netdev,
 static u32 gve_get_priv_flags(struct net_device *netdev)
 {
 	struct gve_priv *priv = netdev_priv(netdev);
-	u32 ret_flags = 0;
-
-	/* Only 1 flag exists currently: report-stats (BIT(O)), so set that flag. */
-	if (priv->ethtool_flags & BIT(0))
-		ret_flags |= BIT(0);
-	return ret_flags;
+	return priv->ethtool_flags;
 }
 
 static int gve_set_priv_flags(struct net_device *netdev, u32 flags)
 {
 	struct gve_priv *priv = netdev_priv(netdev);
-	u64 ori_flags, new_flags;
+	enum gve_queue_format new_format;
+	u32 ori_flags;
+
+	/* Make sure there is a queue format to use */
+	if ((priv->ethtool_formats & flags) == 0) {
+		dev_err(&priv->pdev->dev,
+			"All available queue formats disabled\n");
+		return -EINVAL;
+	}
 
 	ori_flags = READ_ONCE(priv->ethtool_flags);
-	new_flags = ori_flags;
 
-	/* Only one priv flag exists: report-stats (BIT(0))*/
-	if (flags & BIT(0))
-		new_flags |= BIT(0);
-	else
-		new_flags &= ~(BIT(0));
-	priv->ethtool_flags = new_flags;
+	priv->ethtool_flags = flags & GVE_PRIV_FLAGS_MASK;
+
 	/* start report-stats timer when user turns report stats on. */
-	if (flags & BIT(0)) {
+	if (gve_get_report_stats(priv))
 		mod_timer(&priv->stats_report_timer,
 			  round_jiffies(jiffies +
 					msecs_to_jiffies(priv->stats_report_timer_period)));
-	}
+
 	/* Zero off gve stats when report-stats turned off and */
 	/* delete report stats timer. */
-	if (!(flags & BIT(0)) && (ori_flags & BIT(0))) {
+	if (!gve_get_report_stats(priv) &&
+	    (ori_flags & BIT(GVE_PRIV_FLAGS_REPORT_STATS))) {
 		int tx_stats_num = GVE_TX_STATS_REPORT_NUM *
 			priv->tx_cfg.num_queues;
 		int rx_stats_num = GVE_RX_STATS_REPORT_NUM *
@@ -530,7 +529,27 @@  static int gve_set_priv_flags(struct net_device *netdev, u32 flags)
 				   sizeof(struct stats));
 		del_timer_sync(&priv->stats_report_timer);
 	}
-	return 0;
+
+	if (priv->ethtool_formats == 0)
+		/* Can't change queue format */
+		return 0;
+
+	/* Check if a new queue format should be activated */
+	if (gve_get_enable_dqo_rda(priv))
+		new_format = GVE_DQO_RDA_FORMAT;
+	else if (gve_get_enable_gqi_rda(priv))
+		new_format = GVE_GQI_RDA_FORMAT;
+	else
+		new_format = GVE_GQI_QPL_FORMAT;
+
+	if (priv->queue_format == new_format)
+		return 0;
+
+	priv->next_queue_format = new_format;
+	dev_info(&priv->pdev->dev, "Driver is switching to %s queue format.\n",
+		 gve_queue_format_name(priv->next_queue_format));
+
+	return gve_reset(priv, false);
 }
 
 static int gve_get_link_ksettings(struct net_device *netdev,
diff --git a/drivers/net/ethernet/google/gve/gve_main.c b/drivers/net/ethernet/google/gve/gve_main.c
index 5b40f9c53196..23f30d9d97a0 100644
--- a/drivers/net/ethernet/google/gve/gve_main.c
+++ b/drivers/net/ethernet/google/gve/gve_main.c
@@ -32,6 +32,23 @@ 
 const char gve_version_str[] = GVE_VERSION;
 static const char gve_version_prefix[] = GVE_VERSION_PREFIX;
 
+const char *gve_queue_format_name(enum gve_queue_format format)
+{
+	switch (format) {
+	case GVE_QUEUE_FORMAT_UNSPECIFIED:
+		return "unspecified";
+	case GVE_GQI_RDA_FORMAT:
+		return "GQI RDA";
+	case GVE_GQI_QPL_FORMAT:
+		return "GQI QPL";
+	case GVE_DQO_RDA_FORMAT:
+		return "DQO RDA";
+	default:
+		return "unknown";
+	}
+}
+
+struct bpf_prog;
 static int gve_verify_driver_compatibility(struct gve_priv *priv)
 {
 	int err;
@@ -1413,6 +1430,11 @@  static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 		return err;
 	}
 
+	if (skip_describe_device) {
+		priv->queue_format = priv->next_queue_format;
+		goto setup_device;
+	}
+
 	err = gve_verify_driver_compatibility(priv);
 	if (err) {
 		dev_err(&priv->pdev->dev,
@@ -1420,9 +1442,6 @@  static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
 		goto err;
 	}
 
-	if (skip_describe_device)
-		goto setup_device;
-
 	priv->queue_format = GVE_QUEUE_FORMAT_UNSPECIFIED;
 	/* Get the initial information we need from the device */
 	err = gve_adminq_describe_device(priv);
@@ -1661,6 +1680,7 @@  static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	priv->service_task_flags = 0x0;
 	priv->state_flags = 0x0;
 	priv->ethtool_flags = 0x0;
+	priv->ethtool_formats = 0x0;
 
 	gve_set_probe_in_progress(priv);
 	priv->gve_wq = alloc_ordered_workqueue("gve", 0);