diff mbox series

amd-xgbe: fix mismatched prototype

Message ID 20230203121553.2871598-1-arnd@kernel.org (mailing list archive)
State Accepted
Commit bbe641866318b2693e2778862e3b8ed6ccd0843b
Delegated to: Netdev Maintainers
Headers show
Series amd-xgbe: fix mismatched prototype | expand

Checks

Context Check Description
netdev/tree_selection success Guessed tree name to be net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success Fixes tag looks correct
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 9 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Arnd Bergmann Feb. 3, 2023, 12:15 p.m. UTC
From: Arnd Bergmann <arnd@arndb.de>

The forward declaration was introduced with a prototype that does
not match the function definition:

drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd,  enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch]
 2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int,  unsigned int)'
  391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
      |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~

Ideally there should not be any forward declarations here, which
would make it easier to show that there is no unbounded recursion.
I tried fixing this but could not figure out how to avoid the
recursive call.

As a hotfix, address only the broken prototype to fix the build
problem instead.

Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Simon Horman Feb. 4, 2023, 1:18 p.m. UTC | #1
On Fri, Feb 03, 2023 at 01:15:36PM +0100, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The forward declaration was introduced with a prototype that does
> not match the function definition:
> 
> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd,  enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch]
>  2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int,  unsigned int)'
>   391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> Ideally there should not be any forward declarations here, which
> would make it easier to show that there is no unbounded recursion.
> I tried fixing this but could not figure out how to avoid the
> recursive call.
> 
> As a hotfix, address only the broken prototype to fix the build
> problem instead.
> 
> Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Reviewed-by: Simon Horman <simon.horman@corigine.com>
Shyam Sundar S K Feb. 6, 2023, 4:09 a.m. UTC | #2
On 2/3/2023 5:45 PM, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The forward declaration was introduced with a prototype that does
> not match the function definition:
> 
> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd,  enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch]
>  2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int,  unsigned int)'
>   391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> Ideally there should not be any forward declarations here, which
> would make it easier to show that there is no unbounded recursion.
> I tried fixing this but could not figure out how to avoid the
> recursive call.
> 
> As a hotfix, address only the broken prototype to fix the build
> problem instead.
> 
> Fixes: 4f3b20bfbb75 ("amd-xgbe: add support for rx-adaptation")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Looks good to me.

Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>

Thanks,
Shyam

> ---
>  drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
> index 7d88caa4e623..16e7fb2c0dae 100644
> --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
> +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
> @@ -390,7 +390,8 @@ static DEFINE_MUTEX(xgbe_phy_comm_lock);
>  static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata);
>  static void xgbe_phy_rrc(struct xgbe_prv_data *pdata);
>  static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
> -					unsigned int cmd, unsigned int sub_cmd);
> +					enum xgbe_mb_cmd cmd,
> +					enum xgbe_mb_subcmd sub_cmd);
>  
>  static int xgbe_phy_i2c_xfer(struct xgbe_prv_data *pdata,
>  			     struct xgbe_i2c_op *i2c_op)
>
Jakub Kicinski Feb. 7, 2023, 6:28 a.m. UTC | #3
On Fri,  3 Feb 2023 13:15:36 +0100 Arnd Bergmann wrote:
> The forward declaration was introduced with a prototype that does
> not match the function definition:
> 
> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd,  enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch]
>  2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int,  unsigned int)'
>   391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~

Thanks for the fix. What's the compiler / extra flags you're using?
Doesn't pop up on our setups..
patchwork-bot+netdevbpf@kernel.org Feb. 7, 2023, 6:40 a.m. UTC | #4
Hello:

This patch was applied to netdev/net-next.git (master)
by Jakub Kicinski <kuba@kernel.org>:

On Fri,  3 Feb 2023 13:15:36 +0100 you wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> The forward declaration was introduced with a prototype that does
> not match the function definition:
> 
> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd,  enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch]
>  2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int,  unsigned int)'
>   391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> [...]

Here is the summary with links:
  - amd-xgbe: fix mismatched prototype
    https://git.kernel.org/netdev/net-next/c/bbe641866318

You are awesome, thank you!
Shyam Sundar S K Feb. 7, 2023, 6:54 a.m. UTC | #5
On 2/7/2023 11:58 AM, Jakub Kicinski wrote:
> On Fri,  3 Feb 2023 13:15:36 +0100 Arnd Bergmann wrote:
>> The forward declaration was introduced with a prototype that does
>> not match the function definition:
>>
>> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd,  enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch]
>>  2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int,  unsigned int)'
>>   391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>>       |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
> 
> Thanks for the fix. What's the compiler / extra flags you're using?
> Doesn't pop up on our setups..
> 

Yes please. Even this does not pop on our build systems too. Would like
to know those extra compiler flags.

Thanks,
Shyam
Raju Rangoju Feb. 16, 2023, 3:25 a.m. UTC | #6
On 2/7/2023 12:24 PM, Shyam Sundar S K wrote:
> 
> 
> On 2/7/2023 11:58 AM, Jakub Kicinski wrote:
>> On Fri,  3 Feb 2023 13:15:36 +0100 Arnd Bergmann wrote:
>>> The forward declaration was introduced with a prototype that does
>>> not match the function definition:
>>>
>>> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd,  enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch]
>>>   2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>>>        |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>>> drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int,  unsigned int)'
>>>    391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
>>>        |             ^~~~~~~~~~~~~~~~~~~~~~~~~~~
>>
>> Thanks for the fix. What's the compiler / extra flags you're using?
>> Doesn't pop up on our setups..
>>
> 
> Yes please. Even this does not pop on our build systems too. Would like
> to know those extra compiler flags.

Hi Arnd,

Gentle reminder!

Please share the compiler details / additional flags used to reproduce 
this warning.

Thanks,
Raju

> 
> Thanks,
> Shyam
diff mbox series

Patch

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 7d88caa4e623..16e7fb2c0dae 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -390,7 +390,8 @@  static DEFINE_MUTEX(xgbe_phy_comm_lock);
 static enum xgbe_an_mode xgbe_phy_an_mode(struct xgbe_prv_data *pdata);
 static void xgbe_phy_rrc(struct xgbe_prv_data *pdata);
 static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
-					unsigned int cmd, unsigned int sub_cmd);
+					enum xgbe_mb_cmd cmd,
+					enum xgbe_mb_subcmd sub_cmd);
 
 static int xgbe_phy_i2c_xfer(struct xgbe_prv_data *pdata,
 			     struct xgbe_i2c_op *i2c_op)