diff mbox series

[net-next,v7,1/9] net: dsa: microchip: enable EEE support

Message ID 20230209095113.364524-2-o.rempel@pengutronix.de (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series net: add EEE support for KSZ9477 and AR8035 with i.MX6 | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers success CCed 10 of 10 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 78 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Oleksij Rempel Feb. 9, 2023, 9:51 a.m. UTC 
Some of KSZ9477 family switches provides EEE support. To enable it, we
just need to register set_mac_eee/set_mac_eee handlers and validate
supported chip version and port.

Currently supported chip variants are: KSZ8563, KSZ9477, KSZ9563,
KSZ9567, KSZ9893, KSZ9896, KSZ9897. KSZ8563 supports EEE only with
100BaseTX/Full.  Other chips support 100BaseTX/Full and 1000BaseTX/Full.
Low Power Idle configuration is not supported and currently not
documented in the datasheets.

EEE PHY specific tunings are not documented in the switch datasheets, but can
overlap with KSZ9131 specification.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/dsa/microchip/ksz_common.c | 66 ++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

Comments

Arun Ramadoss Feb. 9, 2023, 1:55 p.m. UTC | #1 
On Thu, 2023-02-09 at 10:51 +0100, Oleksij Rempel wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
> 
> Some of KSZ9477 family switches provides EEE support. To enable it,
> we
> just need to register set_mac_eee/set_mac_eee handlers and validate
> supported chip version and port.
> 
> Currently supported chip variants are: KSZ8563, KSZ9477, KSZ9563,
> KSZ9567, KSZ9893, KSZ9896, KSZ9897. KSZ8563 supports EEE only with
> 100BaseTX/Full.  Other chips support 100BaseTX/Full and
> 1000BaseTX/Full.
> Low Power Idle configuration is not supported and currently not
> documented in the datasheets.
> 
> EEE PHY specific tunings are not documented in the switch datasheets,
> but can
> overlap with KSZ9131 specification.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
diff mbox series

Patch

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 46becc0382d6..729b36eeb2c4 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -2673,6 +2673,70 @@  static int ksz_max_mtu(struct dsa_switch *ds, int port)
 	return -EOPNOTSUPP;
 }
 
+static int ksz_validate_eee(struct dsa_switch *ds, int port)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (!dev->info->internal_phy[port])
+		return -EOPNOTSUPP;
+
+	switch (dev->chip_id) {
+	case KSZ8563_CHIP_ID:
+	case KSZ9477_CHIP_ID:
+	case KSZ9563_CHIP_ID:
+	case KSZ9567_CHIP_ID:
+	case KSZ9893_CHIP_ID:
+	case KSZ9896_CHIP_ID:
+	case KSZ9897_CHIP_ID:
+		return 0;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+static int ksz_get_mac_eee(struct dsa_switch *ds, int port,
+			   struct ethtool_eee *e)
+{
+	int ret;
+
+	ret = ksz_validate_eee(ds, port);
+	if (ret)
+		return ret;
+
+	/* There is no documented control of Tx LPI configuration. */
+	e->tx_lpi_enabled = true;
+
+	/* There is no documented control of Tx LPI timer. According to tests
+	 * Tx LPI timer seems to be set by default to minimal value.
+	 */
+	e->tx_lpi_timer = 0;
+
+	return 0;
+}
+
+static int ksz_set_mac_eee(struct dsa_switch *ds, int port,
+			   struct ethtool_eee *e)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret;
+
+	ret = ksz_validate_eee(ds, port);
+	if (ret)
+		return ret;
+
+	if (!e->tx_lpi_enabled) {
+		dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n");
+		return -EINVAL;
+	}
+
+	if (e->tx_lpi_timer) {
+		dev_err(dev->dev, "Setting EEE Tx LPI timer is not supported\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static void ksz_set_xmii(struct ksz_device *dev, int port,
 			 phy_interface_t interface)
 {
@@ -3130,6 +3194,8 @@  static const struct dsa_switch_ops ksz_switch_ops = {
 	.port_txtstamp		= ksz_port_txtstamp,
 	.port_rxtstamp		= ksz_port_rxtstamp,
 	.port_setup_tc		= ksz_setup_tc,
+	.get_mac_eee		= ksz_get_mac_eee,
+	.set_mac_eee		= ksz_set_mac_eee,
 };
 
 struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)